• My Account
  • My Wish List
  • Sign In
  • Compare Products
  • Create an Account
Toggle Nav
phone-icon
Search
Home
My Account

Grundfos

(12151 products)

  1. Central Heating Pumps
  2. Circulating Pumps
  3. Condensate Pumps
  4. Domestic Hot Water Circulators
  5. Domestic Pressure Boosting
  6. Drainage Pumps
  7. End Suction Pumps
  8. Energy Efficient Products
  9. Expansion Vessels / Pressure Vessels
  10. Garden Pumps
  11. Grey Water Recycling
  12. Heating Circulators
  13. Home Booster Units
  14. Machine Tool Coolant Pumps
  15. Mains Booster Pumps
  16. Packaged Pumping Systems
1 products in this section | View All
Filters Products
Filter Products
  1. Max Head
    101 - 110m
Clear All
Filters Products
Cable length
  1. 1.5m 2 items
  2. 1.7m 5 items
  3. 2.5m 2 items
  4. 5m 4 items
Flow Rate
  1. 0 - 50Ltr/min 13 items
  2. 51 - 100Ltr/min 21 items
  3. 101 - 150Ltr/min 3 items
  4. 151 - 200Ltr/min 4 items
  5. 201 - 250Ltr/min 5 items
  6. 251 - 300Ltr/min 3 items
  7. 301 - 350Ltr/min 5 items
  8. 351 - 400Ltr/min 4 items
  9. 451 - 500Ltr/min 4 items
  10. 551 - 600Ltr/min 4 items
  11. 601 - 650Ltr/min 1 item
  12. 651 - 700Ltr/min 2 items
  13. 701 - 750Ltr/min 2 items
  14. 751 - 800Ltr/min 1 item
  15. 901 - 950Ltr/min 1 item
  16. 951 - 1000Ltr/min 3 items
  17. 1251 - 1300Ltr/min 4 items
  18. 1301 - 1350Ltr/min 1 item
  19. 1401 - 1450Ltr/min 3 items
  20. 1501 - 1550Ltr/min 1 item
  21. 1601 - 1650Ltr/min 1 item
  22. 1901 - 1950Ltr/min 1 item
  23. 2001 - 2050Ltr/min 2 items
  24. 2051 - 2100Ltr/min 1 item
  25. 2401 - 2450Ltr/min 1 item
  26. 2651 - 2700Ltr/min 1 item
  27. 3101 - 3150Ltr/min 1 item
  28. 3201 - 3250Ltr/min 1 item
  29. 3401 - 3450Ltr/min 1 item
  30. 3701 - 3750Ltr/min 1 item
  31. 4001 - 4050Ltr/min 1 item
  32. 5301 - 5350Ltr/min 1 item
  33. 6801 - 6850Ltr/min 1 item
  34. 8501 - 8550Ltr/min 1 item
Immersion Depth
  1. 251 - 300mm 1 item
  2. 401 - 450mm 4 items
  3. 451 - 500mm 2 items
  4. 601 - 650mm 1 item
Impeller Stages
  1. 3 4 items
  2. 4 8 items
  3. 5 8 items
  4. 6 5 items
  5. 7 4 items
  6. 9 2 items
  7. 10 3 items
  8. 11 10 items
  9. 13 2 items
  10. 14 1 item
  11. 15 2 items
  12. 16 4 items
  13. 17 4 items
  14. 19 4 items
  15. 23 2 items
  16. 25 1 item
  17. 28 2 items
Max Head
  1. 0 - 10m 710 items
  2. 11 - 20m 632 items
  3. 21 - 30m 313 items
  4. 31 - 40m 237 items
  5. 41 - 50m 195 items
  6. 51 - 60m 163 items
  7. 61 - 70m 126 items
  8. 71 - 80m 142 items
  9. 81 - 90m 104 items
  10. 91 - 100m 78 items
  11. 101 - 110m 101 items
  12. 111 - 120m 81 items
  13. 121 - 130m 76 items
  14. 131 - 140m 65 items
  15. 141 - 150m 67 items
  16. 151 - 160m 48 items
  17. 161 - 170m 56 items
  18. 171 - 180m 40 items
  19. 181 - 190m 29 items
  20. 191 - 200m 52 items
  21. 201 - 210m 36 items
  22. 211 - 220m 32 items
  23. 221 - 230m 29 items
  24. 231 - 240m 28 items
  25. 241 - 250m 29 items
  26. 251 - 260m 14 items
  27. 261 - 270m 11 items
  28. 271 - 280m 9 items
  29. 281 - 290m 8 items
  30. 291 - 300m 6 items
  31. 301 - 310m 9 items
  32. 311-320m 2 items
  33. 321-330m 7 items
  34. 331-340m 2 items
  35. 341 - 350m 3 items
  36. 351 - 360m 3 items
  37. 361 - 370m 2 items
  38. 371 - 380m 5 items
  39. 381 - 390m 2 items
  40. 391 - 400m 4 items
  41. 401-410m 1 item
  42. 411-420m 3 items
  43. 431-440m 1 item
  44. 451-460m 2 items
  45. 461-470m 1 item
  46. 471-480m 1 item
  47. 491-500m 2 items
  48. 551 - 560m 1 item
  49. 631-640m 1 item
Number of Pumps
  1. 2 6 items
  2. 3 6 items
  3. 4 6 items
  4. 5 2 items
  5. 6 1 item
AC Power
  1. Single Phase 10 items
  2. Three Phase 91 items
Price
Pump Material
  1. Cast iron 16 items
  2. Stainless Steel 64 items
  3. Titanium 3 items
Speed
  1. Fixed 3 items
  2. Variable 5 items
Submersible vs Surface Mounted
  1. Submersible 18 items
  2. Surface Mounted 75 items
  3. Immersible 8 items
Switch
  1. None 9 items
Electrical supply
  1. 230V 4 items
  2. 240V 6 items
  3. 400V 52 items
  4. 415V 37 items
Water type
  1. Clean Water 21 items
  2. Clean or Discoloured 80 items
Pump Type Filter
  1. Booster Set 24 items
  2. End Suction Pump 2 items
  3. Multistage 57 items
  4. Submersible 18 items
Bars
  1. 16 bar 1 item
Impeller Type
  1. Vertical multistage 68 items
  2. Horizontal multistage 3 items
View as Grid List

101 Items

Page
per page
Filter Products
Set Descending Direction
  1. Grundfos CRNE3-11 A-FGJ-A-E-HQQE Vertical Multistage Pump - 400v - Three Phase - 58 Ltr/min

    98389893

    Grundfos - CRNE3-11 A-FGJ-A-E-HQQE Vertical Multi-Stage Pump - 400V - Three Phase - 58 Ltr/min. - Stainless Steel

    CRNE 3-11 A-FGJ-A-E-HQQE

    Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via combined DIN-ANSI-JIS flanges. The pump is equipped with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:

    • "Alarm": Motor has stopped (flashing red indicator lights)
    • "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
    • "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
    Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in enhanced applications where many inputs and outputs are required:
    • interface for Grundfos CIM fieldbus module
    • GENIbus connection
    • two signal-relay outputs (potential-free contacts)
    • 24 V voltage supply for sensors
    • Grundfos Digital Sensor input and output
    • LiqTec, dry-running protection sensor input
    • two Pt100/Pt1000 inputs
    • two configurable digital inputs or open-collector outputs
    • one analog output, 0-10 V, 0(4)-20 mA
    • 5 V voltage supply to potentiometer and sensor
    • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5-3.5 V
    • two dedicated digital inputs

    Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply


    wishlist Compare
    £4,291.20 RRP £3,089.66 £2,574.72
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  2. Grundfos CRNE3-11 N-FGJ-A-E-HQQE Vertical Multistage Pump - 230v - Single Phase - 58 Ltr/min

    98389930

    Grundfos - CRNE3-11 N-FGJ-A-E-HQQE Vertical Multi-Stage Pump - 230V - Single Phase - 58 Ltr/min. - Stainless Steel

    CRNE 3-11 N-FGJ-A-E-HQQE

    Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via combined DIN-ANSI-JIS flanges. The pump is equipped with a 1-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:

    • "Alarm": Motor has stopped (flashing red indicator lights)
    • "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
    • "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
    Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in enhanced applications where many inputs and outputs are required:
    • interface for Grundfos CIM fieldbus module
    • GENIbus connection
    • two signal-relay outputs (potential-free contacts)
    • 24 V voltage supply for sensors
    • Grundfos Digital Sensor input and output
    • LiqTec, dry-running protection sensor input
    • two Pt100/Pt1000 inputs
    • two configurable digital inputs or open-collector outputs
    • one analog output, 0-10 V, 0(4)-20 mA
    • 5 V voltage supply to potentiometer and sensor
    • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 - 3.5 V; the factory-fitted pressure sensor is connected to one of these inputs
    • two dedicated digital inputs

    Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply


    wishlist Compare
    £4,335.60 RRP £3,034.92 £2,529.10
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  3. Grundfos CRNE3-11 N-FGJ-A-E-HQQE Vertical Multistage Pump - 400v - Three Phase - 58 Ltr/min

    98389976

    Grundfos - CRNE3-11 N-FGJ-A-E-HQQE Vertical Multi-Stage Pump - 400V - Three Phase - 58 Ltr/min.

    CRNE 3-11 N-FGJ-A-E-HQQE

    Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via combined DIN-ANSI-JIS flanges. The pump is equipped with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:

    • "Alarm": Motor has stopped (flashing red indicator lights)
    • "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
    • "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
    Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in enhanced applications where many inputs and outputs are required:
    • interface for Grundfos CIM fieldbus module
    • GENIbus connection
    • two signal-relay outputs (potential-free contacts)
    • 24 V voltage supply for sensors
    • Grundfos Digital Sensor input and output
    • LiqTec, dry-running protection sensor input
    • two Pt100/Pt1000 inputs
    • two configurable digital inputs or open-collector outputs
    • one analog output, 0-10 V, 0(4)-20 mA
    • 5 V voltage supply to potentiometer and sensor
    • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 - 3.5 V; the factory-fitted pressure sensor is connected to one of these inputs
    • two dedicated digital inputs

    Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply


    wishlist Compare
    £4,608.00 RRP £3,225.60 £2,688.00
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  4. Grundfos CRNE64-3-2 A-F-A-E-HQQE Vertical Multistage Pump - 400v - Three Phase - 1284 Ltr/min

    96124020

    Grundfos - CRNE64-3-2 A-F-A-E-HQQE Vertical Multi-Stage Pump - 400V - Three Phase - 1284 Ltr/min. - Stainless Steel

    CRNE 64-3-2 A-F-A-E-HQQE

    Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections:

    • interface for Grundfos CIM fieldbus module
    • RS-485 GENIbus connection
    • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready"
    • two Pt100 inputs
    • three digital inputs
    • one analog output
    • 24 V voltage supply for sensor, Imax = 40 mA
    • three analog sensor inputs, 0-10 V, 0(4)-20 mA
    • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA
    • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA
    • pump start/stop input (potential-free contact)

    Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply


    wishlist Compare
    £24,776.40 RRP £17,343.48 £14,452.90
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  5. Grundfos CRNE64-3-2 N-F-A-E-HQQE Vertical Multistage Pump - 400v - Three Phase - 1284 Ltr/min

    96124025

    Grundfos - CRNE64-3-2 N-F-A-E-HQQE Vertical Multi-Stage Pump - 400V - Three Phase - 1284 Ltr/min. - Stainless Steel

    CRNE 64-3-2 N-F-A-E-HQQE

    Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections:

    • interface for Grundfos CIM fieldbus module
    • RS-485 GENIbus connection
    • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready"
    • two Pt100 inputs
    • three digital inputs
    • one analog output
    • 24 V voltage supply for sensor, Imax = 40 mA
    • three analog sensor inputs, 0-10 V, 0(4)-20 mA; the factory-fitted pressure sensor is connected to one of these inputs
    • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA
    • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA
    • pump start/stop input (potential-free contact)

    Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply


    wishlist Compare
    £25,082.40 RRP £17,557.68 £14,631.40
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  6. Grundfos CRT 4-10 A-P-A-E-AUUE Vertical Multistage Pump - 400v - Three Phase - 100 Ltr/min

    96100802

    Grundfos - CRT 4-10 A-P-A-E-AUUE Vertical Multi-Stage Pump - 400V - Three Phase - 100 Ltr/min.

    CRT 4-10 A-P-A-E-AUUE
    Vertical, non-self-priming, multi-stage, in-line, centrifugal pump unit for installation in pipe systems and mounting on a foundation.

    The pump has the following characteristics:

    • Pipework connection is via PJE flanges/couplings
    • Power transmission is via Cast Iron split coupling
    • The shaft seal has assembly length according to EN 12756
    • Pump head cover and base are made of Titanium
    • Impellers, intermediate chambers and outer sleeve are made of Titanium

    The motor is a 3-phase AC motor.

    Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply


    wishlist Compare
    £9,136.80 RRP £6,395.76 £5,329.80
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  7. Grundfos CRT16-7 A-P-A-E-AUUE Vertical Multistage Pump - 400v - Three Phase - 266 Ltr/min

    96117249

    Grundfos - CRT16-7 A-P-A-E-AUUE Vertical Multi-Stage Pump - 400V - Three Phase - 266 Ltr/min.

    CRT 16-7 A-P-A-E-AUUE
    Vertical, non-self-priming, multi-stage, in-line, centrifugal pump unit for installation in pipe systems and mounting on a foundation.

    The pump has the following characteristics:

    • Pipework connection is via PJE flanges/couplings
    • Power transmission is via Cast Iron split coupling
    • The shaft seal has assembly length according to EN 12756
    • Pump head cover and base are made of Titanium
    • Impellers, intermediate chambers and outer sleeve are made of Titanium

    The motor is a 3-phase AC motor.

    Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply


    wishlist Compare
    £16,549.20 RRP £11,584.44 £9,653.70
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  8. Grundfos CRT8-10 A-P-A-E-AUUE Vertical Multistage Pump - 400v - Three Phase - 158 Ltr/min

    96117229

    Grundfos - CRT8-10 A-P-A-E-AUUE Vertical Multi-Stage Pump - 400V - Three Phase - 158 Ltr/min.

    CRT 8-10 A-P-A-E-AUUE
    Vertical, non-self-priming, multi-stage, in-line, centrifugal pump unit for installation in pipe systems and mounting on a foundation.

    The pump has the following characteristics:

    • Pipework connection is via PJE flanges/couplings
    • Power transmission is via Cast Iron split coupling
    • The shaft seal has assembly length according to EN 12756
    • Pump head cover and base are made of Titanium
    • Impellers, intermediate chambers and outer sleeve are made of Titanium

    The motor is a 3-phase AC motor.

    Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply


    wishlist Compare
    £13,114.80 RRP £9,180.36 £7,650.30
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  9. Grundfos Hydro MPC-E 2 CRE32-4-2 U1 D-A-A-GHJ Booster Set - 400v - Three Phase - 1601 Ltr/min

    99208521

    Grundfos - Hydro MPC-E 2 CRE32-4-2 U1 D-A-A-GHJ Booster Set - 400V - Three Phase - 1601 Ltr/min. - 11kW

    Hydro MPC-E 2 CRE 32-4-2

    Pressure booster system supplied as space-efficient assembly according to DIN standard 1988/T5.

    All pumps are speed-controlled.

    From 0.37 to 11 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with electronically commutated permanent-magnet motors with extremely high efficiency. The total efficiency of the motor including the frequency converter applies to IE5 level in IEC60034-31.

    From 15 to 22 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with motors with integrated frequency control. The total efficiency of the motor including the frequency converter is better than the IE3 level in IEC60034-31, even though this standard only applies to the motor.

    • Pump changeover is self-operating and depends on load, time and fault
    • The system performance is adapted to the demand through cutting in/out the required number of pumps and through parallel control of the pumps in operation
    • Hydro MPC-E maintains a constant pressure through continuous adjustment of the speed of the pumps

    The system consists of these parts:
    :vertical, multi-stage, centrifugal pumps, type CRE 32-4-2
    Pump parts in contact with the pumped liquid are made of Stainless Steel EN DIN 1.4301 Pump bases and heads are of either Cast Iron/Stainless Steel (CRI) or Cast Iron EN-GJS-500-7 (CR), depending on pump type; other vital parts are made of Stainless Steel EN DIN 1.4301 The pumps are equipped with a service-friendly cartridge shaft seal, HQQE (SiC/SiC/EPDM)

    • Control MPC in a steel cabinet, IP54, including main switch, all required fuses, motor protection, switching equipment and microprocessor-controlled CU 352
    • Pressure gauge and pressure transmitter (analog output 4-20 mA)
    • Adapter with isolating valve for connection of diaphragm tank
    • Non-return valves are certified according to DVGW, isolating valves according to DIN and DVGW
    • One non-return valve (POM) and two isolating valves for each pump
    • Stainless Steel base frame to EN DIN 1.4301 up to CR 90; above CR 90 the pumps are placed on a galvanized I-Beam frame
    • Two Stainless Steel manifolds to EN DIN 1.4571

    Dry-running protection and diaphragm tank are available according to the list of accessories.

    Pump operation is controlled by Control MPC with the following functions:

    • Grundfos bus communication
    • Potential-free changeover contacts for operation and fault
    • Green indicator light for operating indications and red indicator light for fault indications
    • Colour screen display
    • Display and indication functions:
    • Alarm log with the previous 24 warnings/alarms
    • Sensors and cables monitored for malfunction
    • Motor protection
    • Non-return valve monitoring
    • Inlet pressure
    • Minimum and maximum limits of current value
    • Pump and system monitoring functions:
    • Digital inputs and outputs can be configured individually
    • Up to 6 alternative setpoints
    • Max., min. or user-defined duty
    • System on/off
    • Possibility of digital remote-control functions:
    • Setpoint ramp
    • Log function
    • Possibility of external setpoint influence
    • Manual operation
    • Multi-sensor (up to 6 sensors to influence the setpoint)
    • Secondary sensor (Possible to switch to another sensor/setpoint)
    • Possibility of backup sensor (redundant primary sensor)
    • Possibility of standby pump allocation
    • self-operating pump test function to prevent idle pumps from seizing up
    • Selection of min. time between start/stop, self-operating pump changeover and pump priority
    • self-operating cascade control of pumps for optimum efficiency
    • On/off operation at low flow
    • Soft pressure build-up (To prevent water hammer during startup)
    • Constant pressure at setpoint, independent of inlet pressure
    • PID controller with adjustable PI parameters (Kp + Ti)
    • Constant-pressure control through continuously variable adjustment of the speed of each individual pump
    • Intelligent multipump controller, CU 352

    It is possible to add CIM communication modules for communicating with Scada/BMS.

    Pumps, piping, cabling complete as well as Control MPC are mounted on the base frame. The booster system has been preset and tested.

    There are options to upgrade the pressure boosting system.

    Suitable for: Commercial heating, Commercial water pressure boosting, District heating, District cooling, Industrial cleaning process, Industrial heating, Industrial cooling, Industrial water supply and transfer, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment


    wishlist Compare
    £46,604.40 RRP £34,487.26 £28,739.38
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  10. Grundfos Hydro MPC-E 2 CRE64-3-2 U1 D-A-A-GHJ Booster Set - 400v - Three Phase - 3402 Ltr/min

    98427088

    Grundfos - Hydro MPC-E 2 CRE64-3-2 U1 D-A-A-GHJ Booster Set - 400V - Three Phase - 3402 Ltr/min. - 11kW

    Hydro MPC-E 2 CRE 64-3-2

    Pressure booster system supplied as space-efficient assembly according to DIN standard 1988/T5.

    All pumps are speed-controlled.

    From 0.37 to 11 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with electronically commutated permanent-magnet motors with extremely high efficiency. The total efficiency of the motor including the frequency converter applies to IE5 level in IEC60034-31.

    From 15 to 22 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with motors with integrated frequency control. The total efficiency of the motor including the frequency converter is better than the IE3 level in IEC60034-31, even though this standard only applies to the motor.

    • Pump changeover is self-operating and depends on load, time and fault
    • The system performance is adapted to the demand through cutting in/out the required number of pumps and through parallel control of the pumps in operation
    • Hydro MPC-E maintains a constant pressure through continuous adjustment of the speed of the pumps

    The system consists of these parts:
    :vertical, multi-stage, centrifugal pumps, type CRE 64-3-2
    Pump parts in contact with the pumped liquid are made of Stainless Steel EN DIN 1.4301 Pump bases and heads are of either Cast Iron/Stainless Steel (CRI) or Cast Iron EN-GJS-500-7 (CR), depending on pump type; other vital parts are made of Stainless Steel EN DIN 1.4301 The pumps are equipped with a service-friendly cartridge shaft seal, HQQE (SiC/SiC/EPDM)

    • Control MPC in a steel cabinet, IP54, including main switch, all required fuses, motor protection, switching equipment and microprocessor-controlled CU 352
    • Pressure gauge and pressure transmitter (analog output 4-20 mA)
    • Adapter with isolating valve for connection of diaphragm tank
    • Non-return valves are certified according to DVGW, isolating valves according to DIN and DVGW
    • One non-return valve (POM) and two isolating valves for each pump
    • Stainless Steel base frame to EN DIN 1.4301 up to CR 90; above CR 90 the pumps are placed on a galvanized I-Beam frame
    • Two Stainless Steel manifolds to EN DIN 1.4571

    Dry-running protection and diaphragm tank are available according to the list of accessories.

    Pump operation is controlled by Control MPC with the following functions:

    • Grundfos bus communication
    • Potential-free changeover contacts for operation and fault
    • Green indicator light for operating indications and red indicator light for fault indications
    • Colour screen display
    • Display and indication functions:
    • Alarm log with the previous 24 warnings/alarms
    • Sensors and cables monitored for malfunction
    • Motor protection
    • Non-return valve monitoring
    • Inlet pressure
    • Minimum and maximum limits of current value
    • Pump and system monitoring functions:
    • Digital inputs and outputs can be configured individually
    • Up to 6 alternative setpoints
    • Max., min. or user-defined duty
    • System on/off
    • Possibility of digital remote-control functions:
    • Setpoint ramp
    • Log function
    • Possibility of external setpoint influence
    • Manual operation
    • Multi-sensor (up to 6 sensors to influence the setpoint)
    • Secondary sensor (Possible to switch to another sensor/setpoint)
    • Possibility of backup sensor (redundant primary sensor)
    • Possibility of standby pump allocation
    • self-operating pump test function to prevent idle pumps from seizing up
    • Selection of min. time between start/stop, self-operating pump changeover and pump priority
    • self-operating cascade control of pumps for optimum efficiency
    • On/off operation at low flow
    • Soft pressure build-up (To prevent water hammer during startup)
    • Constant pressure at setpoint, independent of inlet pressure
    • PID controller with adjustable PI parameters (Kp + Ti)
    • Constant-pressure control through continuously variable adjustment of the speed of each individual pump
    • Intelligent multipump controller, CU 352

    It is possible to add CIM communication modules for communicating with Scada/BMS.

    Pumps, piping, cabling complete as well as Control MPC are mounted on the base frame. The booster system has been preset and tested.

    There are options to upgrade the pressure boosting system.

    Suitable for: Commercial heating, Commercial water pressure boosting, District heating, District cooling, Industrial cleaning process, Industrial heating, Industrial cooling, Industrial water supply and transfer, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment


    wishlist Compare
    £69,870.00 RRP £51,703.80 £43,086.50
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  11. Grundfos Hydro MPC-E 2 CRIE15-5 U1 D-A-A-GHJ Booster Set - 400v - Three Phase - 950 Ltr/min

    99208380

    Grundfos - Hydro MPC-E 2 CRIE15-5 U1 D-A-A-GHJ Booster Set - 400V - Three Phase - 950 Ltr/min. - 11kW

    Hydro MPC-E 2 CRIE 15-5

    Pressure booster system supplied as space-efficient assembly according to DIN standard 1988/T5.

    All pumps are speed-controlled.

    From 0.37 to 11 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with electronically commutated permanent-magnet motors with extremely high efficiency. The total efficiency of the motor including the frequency converter applies to IE5 level in IEC60034-31.

    From 15 to 22 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with motors with integrated frequency control. The total efficiency of the motor including the frequency converter is better than the IE3 level in IEC60034-31, even though this standard only applies to the motor.

    • Pump changeover is self-operating and depends on load, time and fault
    • The system performance is adapted to the demand through cutting in/out the required number of pumps and through parallel control of the pumps in operation
    • Hydro MPC-E maintains a constant pressure through continuous adjustment of the speed of the pumps

    The system consists of these parts:
    :vertical, multi-stage, centrifugal pumps, type CRIE 15-5
    Pump parts in contact with the pumped liquid are made of Stainless Steel EN DIN 1.4301 Pump bases and heads are of either Cast Iron/Stainless Steel (CRI) or Cast Iron EN-GJS-500-7 (CR), depending on pump type; other vital parts are made of Stainless Steel EN DIN 1.4301 The pumps are equipped with a service-friendly cartridge shaft seal, HQQE (SiC/SiC/EPDM)

    • Control MPC in a steel cabinet, IP54, including main switch, all required fuses, motor protection, switching equipment and microprocessor-controlled CU 352
    • Pressure gauge and pressure transmitter (analog output 4-20 mA)
    • Adapter with isolating valve for connection of diaphragm tank
    • Non-return valves are certified according to DVGW, isolating valves according to DIN and DVGW
    • One non-return valve (POM) and two isolating valves for each pump
    • Stainless Steel base frame to EN DIN 1.4301 up to CR 90; above CR 90 the pumps are placed on a galvanized I-Beam frame
    • Two Stainless Steel manifolds to EN DIN 1.4571

    Dry-running protection and diaphragm tank are available according to the list of accessories.

    Pump operation is controlled by Control MPC with the following functions:

    • Grundfos bus communication
    • Potential-free changeover contacts for operation and fault
    • Green indicator light for operating indications and red indicator light for fault indications
    • Colour screen display
    • Display and indication functions:
    • Alarm log with the previous 24 warnings/alarms
    • Sensors and cables monitored for malfunction
    • Motor protection
    • Non-return valve monitoring
    • Inlet pressure
    • Minimum and maximum limits of current value
    • Pump and system monitoring functions:
    • Digital inputs and outputs can be configured individually
    • Up to 6 alternative setpoints
    • Max., min. or user-defined duty
    • System on/off
    • Possibility of digital remote-control functions:
    • Setpoint ramp
    • Log function
    • Possibility of external setpoint influence
    • Manual operation
    • Multi-sensor (up to 6 sensors to influence the setpoint)
    • Secondary sensor (Possible to switch to another sensor/setpoint)
    • Possibility of backup sensor (redundant primary sensor)
    • Possibility of standby pump allocation
    • self-operating pump test function to prevent idle pumps from seizing up
    • Selection of min. time between start/stop, self-operating pump changeover and pump priority
    • self-operating cascade control of pumps for optimum efficiency
    • On/off operation at low flow
    • Soft pressure build-up (To prevent water hammer during startup)
    • Constant pressure at setpoint, independent of inlet pressure
    • PID controller with adjustable PI parameters (Kp + Ti)
    • Constant-pressure control through continuously variable adjustment of the speed of each individual pump
    • Intelligent multipump controller, CU 352

    It is possible to add CIM communication modules for communicating with Scada/BMS.

    Pumps, piping, cabling complete as well as Control MPC are mounted on the base frame. The booster system has been preset and tested.

    There are options to upgrade the pressure boosting system.

    Suitable for: Commercial heating, Commercial water pressure boosting, District heating, District cooling, Industrial cleaning process, Industrial heating, Industrial cooling, Industrial water supply and transfer, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment


    wishlist Compare
    £36,439.20 RRP £26,965.01 £22,470.84
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  12. Grundfos Hydro MPC-E 2 CRIE3-11 U1 A-A-A-GHJ Booster Set - 400v - Three Phase - 183 Ltr/min

    98426902

    Grundfos - Hydro MPC-E 2 CRIE3-11 U1 A-A-A-GHJ Booster Set - 400V - Three Phase - 183 Ltr/min. - 11kW

    Hydro MPC-E 2 CRIE 3-11

    Pressure booster system supplied as space-efficient assembly according to DIN standard 1988/T5.

    All pumps are speed-controlled.

    From 0.37 to 11 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with electronically commutated permanent-magnet motors with extremely high efficiency. The total efficiency of the motor including the frequency converter applies to IE5 level in IEC60034-31.

    From 15 to 22 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with motors with integrated frequency control. The total efficiency of the motor including the frequency converter is better than the IE3 level in IEC60034-31, even though this standard only applies to the motor.

    • Pump changeover is self-operating and depends on load, time and fault
    • The system performance is adapted to the demand through cutting in/out the required number of pumps and through parallel control of the pumps in operation
    • Hydro MPC-E maintains a constant pressure through continuous adjustment of the speed of the pumps

    The system consists of these parts:
    :vertical, multi-stage, centrifugal pumps, type CRIE 3-11
    Pump parts in contact with the pumped liquid are made of Stainless Steel EN DIN 1.4301 Pump bases and heads are of either Cast Iron/Stainless Steel (CRI) or Cast Iron EN-GJS-500-7 (CR), depending on pump type; other vital parts are made of Stainless Steel EN DIN 1.4301 The pumps are equipped with a service-friendly cartridge shaft seal, HQQE (SiC/SiC/EPDM)

    • Control MPC in a steel cabinet, IP54, including main switch, all required fuses, motor protection, switching equipment and microprocessor-controlled CU 352
    • Pressure gauge and pressure transmitter (analog output 4-20 mA)
    • Adapter with isolating valve for connection of diaphragm tank
    • Non-return valves are certified according to DVGW, isolating valves according to DIN and DVGW
    • One non-return valve (POM) and two isolating valves for each pump
    • Stainless Steel base frame to EN DIN 1.4301 up to CR 90; above CR 90 the pumps are placed on a galvanized I-Beam frame
    • Two Stainless Steel manifolds to EN DIN 1.4571

    Dry-running protection and diaphragm tank are available according to the list of accessories.

    Pump operation is controlled by Control MPC with the following functions:

    • Grundfos bus communication
    • Potential-free changeover contacts for operation and fault
    • Green indicator light for operating indications and red indicator light for fault indications
    • Colour screen display
    • Display and indication functions:
    • Alarm log with the previous 24 warnings/alarms
    • Sensors and cables monitored for malfunction
    • Motor protection
    • Non-return valve monitoring
    • Inlet pressure
    • Minimum and maximum limits of current value
    • Pump and system monitoring functions:
    • Digital inputs and outputs can be configured individually
    • Up to 6 alternative setpoints
    • Max., min. or user-defined duty
    • System on/off
    • Possibility of digital remote-control functions:
    • Setpoint ramp
    • Log function
    • Possibility of external setpoint influence
    • Manual operation
    • Multi-sensor (up to 6 sensors to influence the setpoint)
    • Secondary sensor (Possible to switch to another sensor/setpoint)
    • Possibility of backup sensor (redundant primary sensor)
    • Possibility of standby pump allocation
    • self-operating pump test function to prevent idle pumps from seizing up
    • Selection of min. time between start/stop, self-operating pump changeover and pump priority
    • self-operating cascade control of pumps for optimum efficiency
    • On/off operation at low flow
    • Soft pressure build-up (To prevent water hammer during startup)
    • Constant pressure at setpoint, independent of inlet pressure
    • PID controller with adjustable PI parameters (Kp + Ti)
    • Constant-pressure control through continuously variable adjustment of the speed of each individual pump
    • Intelligent multipump controller, CU 352

    It is possible to add CIM communication modules for communicating with Scada/BMS.

    Pumps, piping, cabling complete as well as Control MPC are mounted on the base frame. The booster system has been preset and tested.

    There are options to upgrade the pressure boosting system.

    Suitable for: Commercial heating, Commercial water pressure boosting, District heating, District cooling, Industrial cleaning process, Industrial heating, Industrial cooling, Industrial water supply and transfer, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment


    wishlist Compare
    £19,780.80 RRP £14,637.79 £12,198.16
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  13. Grundfos Hydro MPC-E 3 CRE32-4-2 U1 D-A-A-GHJ Booster Set - 400v - Three Phase - 2401 Ltr/min

    99208522

    Grundfos - Hydro MPC-E 3 CRE32-4-2 U1 D-A-A-GHJ Booster Set - 400V - Three Phase - 2401 Ltr/min. - 11kW

    Hydro MPC-E 3 CRE 32-4-2

    Pressure booster system supplied as space-efficient assembly according to DIN standard 1988/T5.

    All pumps are speed-controlled.

    From 0.37 to 11 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with electronically commutated permanent-magnet motors with extremely high efficiency. The total efficiency of the motor including the frequency converter applies to IE5 level in IEC60034-31.

    From 15 to 22 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with motors with integrated frequency control. The total efficiency of the motor including the frequency converter is better than the IE3 level in IEC60034-31, even though this standard only applies to the motor.

    • Pump changeover is self-operating and depends on load, time and fault
    • The system performance is adapted to the demand through cutting in/out the required number of pumps and through parallel control of the pumps in operation
    • Hydro MPC-E maintains a constant pressure through continuous adjustment of the speed of the pumps

    The system consists of these parts:
    :vertical, multi-stage, centrifugal pumps, type CRE 32-4-2
    Pump parts in contact with the pumped liquid are made of Stainless Steel EN DIN 1.4301 Pump bases and heads are of either Cast Iron/Stainless Steel (CRI) or Cast Iron EN-GJS-500-7 (CR), depending on pump type; other vital parts are made of Stainless Steel EN DIN 1.4301 The pumps are equipped with a service-friendly cartridge shaft seal, HQQE (SiC/SiC/EPDM)

    • Control MPC in a steel cabinet, IP54, including main switch, all required fuses, motor protection, switching equipment and microprocessor-controlled CU 352
    • Pressure gauge and pressure transmitter (analog output 4-20 mA)
    • Adapter with isolating valve for connection of diaphragm tank
    • Non-return valves are certified according to DVGW, isolating valves according to DIN and DVGW
    • One non-return valve (POM) and two isolating valves for each pump
    • Stainless Steel base frame to EN DIN 1.4301 up to CR 90; above CR 90 the pumps are placed on a galvanized I-Beam frame
    • Two Stainless Steel manifolds to EN DIN 1.4571

    Dry-running protection and diaphragm tank are available according to the list of accessories.

    Pump operation is controlled by Control MPC with the following functions:

    • Grundfos bus communication
    • Potential-free changeover contacts for operation and fault
    • Green indicator light for operating indications and red indicator light for fault indications
    • Colour screen display
    • Display and indication functions:
    • Alarm log with the previous 24 warnings/alarms
    • Sensors and cables monitored for malfunction
    • Motor protection
    • Non-return valve monitoring
    • Inlet pressure
    • Minimum and maximum limits of current value
    • Pump and system monitoring functions:
    • Digital inputs and outputs can be configured individually
    • Up to 6 alternative setpoints
    • Max., min. or user-defined duty
    • System on/off
    • Possibility of digital remote-control functions:
    • Setpoint ramp
    • Log function
    • Possibility of external setpoint influence
    • Manual operation
    • Multi-sensor (up to 6 sensors to influence the setpoint)
    • Secondary sensor (Possible to switch to another sensor/setpoint)
    • Possibility of backup sensor (redundant primary sensor)
    • Possibility of standby pump allocation
    • self-operating pump test function to prevent idle pumps from seizing up
    • Selection of min. time between start/stop, self-operating pump changeover and pump priority
    • self-operating cascade control of pumps for optimum efficiency
    • On/off operation at low flow
    • Soft pressure build-up (To prevent water hammer during startup)
    • Constant pressure at setpoint, independent of inlet pressure
    • PID controller with adjustable PI parameters (Kp + Ti)
    • Constant-pressure control through continuously variable adjustment of the speed of each individual pump
    • Intelligent multipump controller, CU 352

    It is possible to add CIM communication modules for communicating with Scada/BMS.

    Pumps, piping, cabling complete as well as Control MPC are mounted on the base frame. The booster system has been preset and tested.

    There are options to upgrade the pressure boosting system.

    Suitable for: Commercial heating, Commercial water pressure boosting, District heating, District cooling, Industrial cleaning process, Industrial heating, Industrial cooling, Industrial water supply and transfer, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment


    wishlist Compare
    £68,792.40 RRP £50,906.38 £42,421.98
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  14. Grundfos Hydro MPC-E 3 CRE64-3-2 U1 D-A-A-GHJ Booster Set - 400v - Three Phase - 3104 Ltr/min

    98427089

    Grundfos - Hydro MPC-E 3 CRE64-3-2 U1 D-A-A-GHJ Booster Set - 400V - Three Phase - 3104 Ltr/min. - 11kW

    Hydro MPC-E 3 CRE 64-3-2

    Pressure booster system supplied as space-efficient assembly according to DIN standard 1988/T5.

    All pumps are speed-controlled.

    From 0.37 to 11 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with electronically commutated permanent-magnet motors with extremely high efficiency. The total efficiency of the motor including the frequency converter applies to IE5 level in IEC60034-31.

    From 15 to 22 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with motors with integrated frequency control. The total efficiency of the motor including the frequency converter is better than the IE3 level in IEC60034-31, even though this standard only applies to the motor.

    • Pump changeover is self-operating and depends on load, time and fault
    • The system performance is adapted to the demand through cutting in/out the required number of pumps and through parallel control of the pumps in operation
    • Hydro MPC-E maintains a constant pressure through continuous adjustment of the speed of the pumps

    The system consists of these parts:
    :vertical, multi-stage, centrifugal pumps, type CRE 64-3-2
    Pump parts in contact with the pumped liquid are made of Stainless Steel EN DIN 1.4301 Pump bases and heads are of either Cast Iron/Stainless Steel (CRI) or Cast Iron EN-GJS-500-7 (CR), depending on pump type; other vital parts are made of Stainless Steel EN DIN 1.4301 The pumps are equipped with a service-friendly cartridge shaft seal, HQQE (SiC/SiC/EPDM)

    • Control MPC in a steel cabinet, IP54, including main switch, all required fuses, motor protection, switching equipment and microprocessor-controlled CU 352
    • Pressure gauge and pressure transmitter (analog output 4-20 mA)
    • Adapter with isolating valve for connection of diaphragm tank
    • Non-return valves are certified according to DVGW, isolating valves according to DIN and DVGW
    • One non-return valve (POM) and two isolating valves for each pump
    • Stainless Steel base frame to EN DIN 1.4301 up to CR 90; above CR 90 the pumps are placed on a galvanized I-Beam frame
    • Two Stainless Steel manifolds to EN DIN 1.4571

    Dry-running protection and diaphragm tank are available according to the list of accessories.

    Pump operation is controlled by Control MPC with the following functions:

    • Grundfos bus communication
    • Potential-free changeover contacts for operation and fault
    • Green indicator light for operating indications and red indicator light for fault indications
    • Colour screen display
    • Display and indication functions:
    • Alarm log with the previous 24 warnings/alarms
    • Sensors and cables monitored for malfunction
    • Motor protection
    • Non-return valve monitoring
    • Inlet pressure
    • Minimum and maximum limits of current value
    • Pump and system monitoring functions:
    • Digital inputs and outputs can be configured individually
    • Up to 6 alternative setpoints
    • Max., min. or user-defined duty
    • System on/off
    • Possibility of digital remote-control functions:
    • Setpoint ramp
    • Log function
    • Possibility of external setpoint influence
    • Manual operation
    • Multi-sensor (up to 6 sensors to influence the setpoint)
    • Secondary sensor (Possible to switch to another sensor/setpoint)
    • Possibility of backup sensor (redundant primary sensor)
    • Possibility of standby pump allocation
    • self-operating pump test function to prevent idle pumps from seizing up
    • Selection of min. time between start/stop, self-operating pump changeover and pump priority
    • self-operating cascade control of pumps for optimum efficiency
    • On/off operation at low flow
    • Soft pressure build-up (To prevent water hammer during startup)
    • Constant pressure at setpoint, independent of inlet pressure
    • PID controller with adjustable PI parameters (Kp + Ti)
    • Constant-pressure control through continuously variable adjustment of the speed of each individual pump
    • Intelligent multipump controller, CU 352

    It is possible to add CIM communication modules for communicating with Scada/BMS.

    Pumps, piping, cabling complete as well as Control MPC are mounted on the base frame. The booster system has been preset and tested.

    There are options to upgrade the pressure boosting system.

    Suitable for: Commercial heating, Commercial water pressure boosting, District heating, District cooling, Industrial cleaning process, Industrial heating, Industrial cooling, Industrial water supply and transfer, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment


    wishlist Compare
    £100,011.60 RRP £74,008.58 £61,673.82
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  15. Grundfos Hydro MPC-E 3 CRIE15-5 U1 D-A-A-GHJ Booster Set - 400v - Three Phase - 1417 Ltr/min

    99208381

    Grundfos - Hydro MPC-E 3 CRIE15-5 U1 D-A-A-GHJ Booster Set - 400V - Three Phase - 1417 Ltr/min. - 11kW

    Hydro MPC-E 3 CRIE 15-5

    Pressure booster system supplied as space-efficient assembly according to DIN standard 1988/T5.

    All pumps are speed-controlled.

    From 0.37 to 11 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with electronically commutated permanent-magnet motors with extremely high efficiency. The total efficiency of the motor including the frequency converter applies to IE5 level in IEC60034-31.

    From 15 to 22 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with motors with integrated frequency control. The total efficiency of the motor including the frequency converter is better than the IE3 level in IEC60034-31, even though this standard only applies to the motor.

    • Pump changeover is self-operating and depends on load, time and fault
    • The system performance is adapted to the demand through cutting in/out the required number of pumps and through parallel control of the pumps in operation
    • Hydro MPC-E maintains a constant pressure through continuous adjustment of the speed of the pumps

    The system consists of these parts:
    :vertical, multi-stage, centrifugal pumps, type CRIE 15-5
    Pump parts in contact with the pumped liquid are made of Stainless Steel EN DIN 1.4301 Pump bases and heads are of either Cast Iron/Stainless Steel (CRI) or Cast Iron EN-GJS-500-7 (CR), depending on pump type; other vital parts are made of Stainless Steel EN DIN 1.4301 The pumps are equipped with a service-friendly cartridge shaft seal, HQQE (SiC/SiC/EPDM)

    • Control MPC in a steel cabinet, IP54, including main switch, all required fuses, motor protection, switching equipment and microprocessor-controlled CU 352
    • Pressure gauge and pressure transmitter (analog output 4-20 mA)
    • Adapter with isolating valve for connection of diaphragm tank
    • Non-return valves are certified according to DVGW, isolating valves according to DIN and DVGW
    • One non-return valve (POM) and two isolating valves for each pump
    • Stainless Steel base frame to EN DIN 1.4301 up to CR 90; above CR 90 the pumps are placed on a galvanized I-Beam frame
    • Two Stainless Steel manifolds to EN DIN 1.4571

    Dry-running protection and diaphragm tank are available according to the list of accessories.

    Pump operation is controlled by Control MPC with the following functions:

    • Grundfos bus communication
    • Potential-free changeover contacts for operation and fault
    • Green indicator light for operating indications and red indicator light for fault indications
    • Colour screen display
    • Display and indication functions:
    • Alarm log with the previous 24 warnings/alarms
    • Sensors and cables monitored for malfunction
    • Motor protection
    • Non-return valve monitoring
    • Inlet pressure
    • Minimum and maximum limits of current value
    • Pump and system monitoring functions:
    • Digital inputs and outputs can be configured individually
    • Up to 6 alternative setpoints
    • Max., min. or user-defined duty
    • System on/off
    • Possibility of digital remote-control functions:
    • Setpoint ramp
    • Log function
    • Possibility of external setpoint influence
    • Manual operation
    • Multi-sensor (up to 6 sensors to influence the setpoint)
    • Secondary sensor (Possible to switch to another sensor/setpoint)
    • Possibility of backup sensor (redundant primary sensor)
    • Possibility of standby pump allocation
    • self-operating pump test function to prevent idle pumps from seizing up
    • Selection of min. time between start/stop, self-operating pump changeover and pump priority
    • self-operating cascade control of pumps for optimum efficiency
    • On/off operation at low flow
    • Soft pressure build-up (To prevent water hammer during startup)
    • Constant pressure at setpoint, independent of inlet pressure
    • PID controller with adjustable PI parameters (Kp + Ti)
    • Constant-pressure control through continuously variable adjustment of the speed of each individual pump
    • Intelligent multipump controller, CU 352

    It is possible to add CIM communication modules for communicating with Scada/BMS.

    Pumps, piping, cabling complete as well as Control MPC are mounted on the base frame. The booster system has been preset and tested.

    There are options to upgrade the pressure boosting system.

    Suitable for: Commercial heating, Commercial water pressure boosting, District heating, District cooling, Industrial cleaning process, Industrial heating, Industrial cooling, Industrial water supply and transfer, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment


    wishlist Compare
    £50,443.20 RRP £37,327.97 £31,106.64
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  16. Grundfos Hydro MPC-E 3 CRIE3-11 U1 A-A-A-GHJ Booster Set - 400v - Three Phase - 266 Ltr/min

    98426903

    Grundfos - Hydro MPC-E 3 CRIE3-11 U1 A-A-A-GHJ Booster Set - 400V - Three Phase - 266 Ltr/min. - 11kW

    Hydro MPC-E 3 CRIE 3-11

    Pressure booster system supplied as space-efficient assembly according to DIN standard 1988/T5.

    All pumps are speed-controlled.

    From 0.37 to 11 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with electronically commutated permanent-magnet motors with extremely high efficiency. The total efficiency of the motor including the frequency converter applies to IE5 level in IEC60034-31.

    From 15 to 22 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with motors with integrated frequency control. The total efficiency of the motor including the frequency converter is better than the IE3 level in IEC60034-31, even though this standard only applies to the motor.

    • Pump changeover is self-operating and depends on load, time and fault
    • The system performance is adapted to the demand through cutting in/out the required number of pumps and through parallel control of the pumps in operation
    • Hydro MPC-E maintains a constant pressure through continuous adjustment of the speed of the pumps

    The system consists of these parts:
    :vertical, multi-stage, centrifugal pumps, type CRIE 3-11
    Pump parts in contact with the pumped liquid are made of Stainless Steel EN DIN 1.4301 Pump bases and heads are of either Cast Iron/Stainless Steel (CRI) or Cast Iron EN-GJS-500-7 (CR), depending on pump type; other vital parts are made of Stainless Steel EN DIN 1.4301 The pumps are equipped with a service-friendly cartridge shaft seal, HQQE (SiC/SiC/EPDM)

    • Control MPC in a steel cabinet, IP54, including main switch, all required fuses, motor protection, switching equipment and microprocessor-controlled CU 352
    • Pressure gauge and pressure transmitter (analog output 4-20 mA)
    • Adapter with isolating valve for connection of diaphragm tank
    • Non-return valves are certified according to DVGW, isolating valves according to DIN and DVGW
    • One non-return valve (POM) and two isolating valves for each pump
    • Stainless Steel base frame to EN DIN 1.4301 up to CR 90; above CR 90 the pumps are placed on a galvanized I-Beam frame
    • Two Stainless Steel manifolds to EN DIN 1.4571

    Dry-running protection and diaphragm tank are available according to the list of accessories.

    Pump operation is controlled by Control MPC with the following functions:

    • Grundfos bus communication
    • Potential-free changeover contacts for operation and fault
    • Green indicator light for operating indications and red indicator light for fault indications
    • Colour screen display
    • Display and indication functions:
    • Alarm log with the previous 24 warnings/alarms
    • Sensors and cables monitored for malfunction
    • Motor protection
    • Non-return valve monitoring
    • Inlet pressure
    • Minimum and maximum limits of current value
    • Pump and system monitoring functions:
    • Digital inputs and outputs can be configured individually
    • Up to 6 alternative setpoints
    • Max., min. or user-defined duty
    • System on/off
    • Possibility of digital remote-control functions:
    • Setpoint ramp
    • Log function
    • Possibility of external setpoint influence
    • Manual operation
    • Multi-sensor (up to 6 sensors to influence the setpoint)
    • Secondary sensor (Possible to switch to another sensor/setpoint)
    • Possibility of backup sensor (redundant primary sensor)
    • Possibility of standby pump allocation
    • self-operating pump test function to prevent idle pumps from seizing up
    • Selection of min. time between start/stop, self-operating pump changeover and pump priority
    • self-operating cascade control of pumps for optimum efficiency
    • On/off operation at low flow
    • Soft pressure build-up (To prevent water hammer during startup)
    • Constant pressure at setpoint, independent of inlet pressure
    • PID controller with adjustable PI parameters (Kp + Ti)
    • Constant-pressure control through continuously variable adjustment of the speed of each individual pump
    • Intelligent multipump controller, CU 352

    It is possible to add CIM communication modules for communicating with Scada/BMS.

    Pumps, piping, cabling complete as well as Control MPC are mounted on the base frame. The booster system has been preset and tested.

    There are options to upgrade the pressure boosting system.

    Suitable for: Commercial heating, Commercial water pressure boosting, District heating, District cooling, Industrial cleaning process, Industrial heating, Industrial cooling, Industrial water supply and transfer, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment


    wishlist Compare
    £26,584.80 RRP £19,672.75 £16,393.96
    Grundfos Logo
    In Stock In stock
    Delivery Icon Free Standard Delivery
View as Grid List

101 Items

Page
per page
Filter Products
Set Descending Direction