-
10101K60
Grundfos - SP3A-60 Submersible Borehole Pump - 415V - Three Phase - 73 Ltr/min.Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10". The motor sizes for the pumps are available in 0.37-250 kW.
£6,547.20 RRP £4,844.93 £4,037.44
In stock
Free Standard Delivery
-
05171K60
Grundfos - SP5A-60 Submersible Borehole Pump - 415V - Three Phase - 113 Ltr/min.Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10". The motor sizes for the pumps are available in 0.37-250 kW.
£8,610.00 RRP £6,371.40 £5,309.50
In stock
Free Standard Delivery
-
99159863
Grundfos - MTRE 1 19/19 HS W A HUUV 5.5kW Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 184 Ltr/min.MTRE 1-19/19 HS-W-A-HUUV
Multistage, immersible, self-priming, centrifugal Pump for vertical setup in tanks etc. The Pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. MTRE-HS is a single-Pump setup capable of generating up to 38 Bar.
- Suitable for Machining,
- The impeller is manufactured from Stainless Steel
- Maximum operating pressure: 38 Bar.
- Temperature liquid range: -10 .. 90 °C.
- Approvals include CE,UKCA,RCM,cURus/cCSAus
£5,395.20 RRP £3,776.64 £3,147.20
6 week lead time
Free Standard Delivery
-
99159865
Grundfos - MTRE 3 19/19 HS W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 19 StageMTRE 3-19/19 HS-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. MTRE-HS is a single-pump solution capable of generating up to 38 bar. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption".- "Alarm": Motor has stopped (flashing red indicator lights)
- "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
- "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
Suitable for: Machining
£5,886.00 RRP £4,120.20 £3,433.50
6 week lead time
Free Standard Delivery
-
99050536
Grundfos - CRNE1-23 Q-P-T-E-HQQE Vertical Multi-Stage Pump - 400V - Three Phase - 58 Ltr/min. - Stainless SteelCRNE 1-23 Q-P-T-E-HQQE
Vertical, non-self-priming, high-pressure multi-stage centrifugal pump unit with suction and discharge ports on the same level (in-line) enabling installation in a horizontal one-pipe assembly. The chamber stack is turned upside-down to ensure that the shaft seal is not affected by the high pump discharge pressure. Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling and straightforward service and access. Power transmission is via a split coupling. Pipe connection is via PJE (Victaulic®) couplings. The pump is equipped with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
£7,008.00 RRP £5,045.76 £4,204.80
In stock
Free Standard Delivery
-
12A41945
Grundfos - SP17-45 Submersible Borehole Pump - 400V - Three Phase - 283 Ltr/min.Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10". The
£19,711.20 RRP £14,586.29 £12,155.24
In stock
Free Standard Delivery
-
13A54349
Grundfos - SP30-49 Submersible Borehole Pump - 400V - Three Phase - 110 Ltr/min.Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10". The
£32,728.80 RRP £24,219.31 £20,182.76
In stock
Free Standard Delivery
Grundfos
(12151 products)
Filters Products
Filters Products