-
GR-97924385
Grundfos - Magna1 D40-180F 97924385 Twin Variable Speed Circulator - 250mm - 230V - OBSOLETEMAGNA1 D 40-180 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924393
Grundfos - Magna1 D50-40F 97924393 Twin Variable Speed Circulator - 240mm - 230V - OBSOLETEMAGNA1 D 50-40 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924394
Grundfos - Magna1 D50-60F 97924394 Twin Variable Speed Circulator - 240mm - 230V - OBSOLETEMAGNA1 D 50-60 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924395
Grundfos - Magna1 D50-80F 97924395 Twin Variable Speed Circulator - 240mm - 230V - OBSOLETEMAGNA1 D 50-80 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924396
Grundfos - Magna1 D50-100F 97924396 Twin Variable Speed Circulator - 280mm - 230V - OBSOLETEMAGNA1 D 50-100 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924397
Grundfos - Magna1 D50-120F 97924397 Twin Variable Speed Circulator - 280mm - 230VMAGNA1 D 50-120 F
The Grundfos MAGNA1 is a circulator pump with permanent magnet motor and easy selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintece requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The ideal choice for basic performance needs in applications where system communication is not required.
This unit runs at 230V. It is manufactured in Cast Iron.
In stock
Free Standard Delivery
-
GR-97924398
Grundfos - Magna1 D50-150F 97924398 Twin Variable Speed Circulator - 280mm - 230V - OBSOLETEMAGNA1 D 50-150 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924399
Grundfos - Magna1 D50-180F 97924399 Twin Variable Speed Circulator - 280mm - 230V - OBSOLETEMAGNA1 D 50-180 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924408
Grundfos - Magna1 D65-60F 97924408 Twin Variable Speed Circulator - 340mm - 230V - OBSOLETEMAGNA1 D 65-60 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924409
Grundfos - Magna1 D65-80F 97924409 Twin Variable Speed Circulator - 340mm - 230V - OBSOLETEMAGNA1 D 65-80 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924410
Grundfos - Magna1 D65-100F 97924410 Twin Variable Speed Circulator - 340mm - 230V - OBSOLETEMAGNA1 D 65-100 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924411
Grundfos - Magna1 D65-120F 97924411 Twin Variable Speed Circulator - 340mm - 230V - OBSOLETEMAGNA1 D 65-120 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924412
Grundfos - Magna1 D65-150F 97924412 Twin Variable Speed Circulator - 340mm - 230V - OBSOLETEMAGNA1 D 65-150 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924420
Grundfos - Magna1 D80-60F 97924420 Twin Variable Speed Circulator - 360mm - 230V - OBSOLETEMAGNA1 D 80-60 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924421
Grundfos - Magna1 D80-80F 97924421 Twin Variable Speed Circulator - 360mm - 230V - OBSOLETEMAGNA1 D 80-80 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
-
GR-97924422
Grundfos - Magna1 D80-100F 97924422 Twin Variable Speed Circulator - 360mm - 230V - OBSOLETEMAGNA1 D 80-100 F
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
3 week lead time
Free Standard Delivery
Grundfos
(12151 products)
Filters Products
Filters Products