Grundfos

Unilift CC9 - M1

Grundfos Unilift CC pumps are single-stage submersible pumps with a low suction ability down to 3 mm water level. The pumps are designed for pumping rainwater and grey wastewater, e.g. from

The pumps are appropriate for both stationary and portable use. They are for manual operation. The pumps allow free passage of particles up to ¸10 mm.

The motor incorporates self-operating overload protection cutting out the motor in case of overload. When cooled to normal temperature, the motor restarts automatically.

Suitable for: Commercial wastewater, Domestic wastewater, Industrial wastewater treatment and reuse

SOLOLIFT2 WC-1

Sololift2 WC-1 is a small, space-efficient self-operating lifting station appropriate for pumping of wastewater in private dwellings in places where wastewater cannot be led directly to the sewer by means of a natural downward slope.

Sololift2 WC-1 is appropriate for pumping wastewater from a toilet containing toilet paper and faeces with an additional connection on the lid for, for example, a washbasin.

The pumping of liquids containing other material may cause faults and limit the scope of our guarantee.

Sololift2 WC-1 is typically used to dewater:

The space-efficient lifting station is equipped with:

Design according to EN12050-3 and production inspection by external institute with unique features focused on quick installation, long-lasting operation and straightforward-clean service.

Suitable for: Domestic wastewater

SOLOLIFT2 WC-3

Sololift2 WC-3 is a small, space-efficient self-operating lifting station appropriate for pumping of wastewater in private dwellings in places where wastewater cannot be led directly to the sewer by means of a natural downward slope.

Sololift2 WC-3 is appropriate for pumping wastewater from a toilet containing toilet paper and faeces with additional connections on the lid and to the sides of the tank for, for example, washbasin, shower or bidet.

The pumping of liquids containing other material may cause faults and limit the scope of guarantee.

Sololift2 WC-3 is typically used to dewater:

Extremely low switching levels for the lowest construction heights, which can be an advantage in case of connection of a shower receptor.

The space-efficient lifting station is equipped with:

Design according to EN12050-3 and production inspection by external institute with unique features focused on quick installation, long-lasting operation and straightforward-clean service.

Suitable for: Domestic wastewater

LC 241

The LC 241 level controllers offer a comprehensive range of features for control and monitoring of pumps in wastewater and drainage systems or tank filling in water supply. The LC241 is a metal or plastic cabinet solution offering modularity and customisation according to your needs.

The LC 241 pump controllers are designed for level control, monitoring and protection of Grundfos pumping systems with one or two pumps starting direct-on-line, star delta or as soft starter. The LC 241 pump controllers can be used in various types of empty applications, for example, wastewater transport, drainage or tank filling in water supply.

Setup of the control is easily done either by the predefined application settings or via the step-by-step startup wizard in the intuitive Grundfos GO app using Bluetooth Smart Technology.

With the Grundfos GO app, all detailed pump settings can be easily configured, monitored and commissioned.

The controller is equipped with configurable input and output terminals, giving full flexibility for all applications. However, as an option, the IO 241 module with more input and output options can be built in. Additional options such as manual on, off and auto switch, current transformer, Ex barrier for digital and analogue sensor input and fault light can also be included in your customised solution.

Daily control, supervision and commissioning are straightforward with the intuitive and straightforward-to-use user interface. This saves you valuable time when getting started and in your daily interaction with pumps and the controller. The controller integrates seamlessly into the Grundfos range of communication modules, ensuring an straightforward fit into any supervisory system such as SCADA or Grundfos Cloud.

The controller maintains a detailed alarm and warning log with the last 20 alerts. The alarm log can be accessed remotely via SCADA or Grundfos Cloud. You can also use Grundfos GO to inspect the logs in localised, translated text for straightforward troubleshooting and remedial measures at the pumping station.

The LC 241 controller enables:

Alarm indication of:

As a standard, the LC 241 controller has two alarm relays that can be configured using Grundfos GO to show a variety of status information on a supervisory system or PLC.

Suitable for: Commercial wastewater, Drinking water treatment, Wastewater transport, Flood control, Wastewater treatment

LC 242 2 x 1,9-6,3 DOL 3X400 PI OPT

The LC 242 level controllers offer a comprehensive range of features for management and monitoring of groundwater supply or tank filling. The LC 242 is a metal or plastic cabinet setup offering modularity and customisation according to your needs.

The LC 242 Pump controllers are engineered for level management, monitoring and protection of groundwater systems with one or two Pumps starting direct-on-line, star delta or as soft starter. The LC 242 Pump controllers can be used in various types of applications, for example, groundwater supply, irrigation installations, small waterworks, network Pumping stations, main Pumping stations, commercial buildings and municipal installations.

Setup of the management is easily done either by the predefined application settings or via the step-by-step startup wizard in the intuitive Grundfos GO app using Bluetooth Smart Technology. With the Grundfos GO app, all detailed Pump settings can be easily configured, monitored and commissioned.

The controller is equipped with configurable input and output terminals, giving full flexibility for all applications. However, as an option, the IO 241 module with more input and output options can be built in. Additional options such as manual on, off and auto switch and fault light can also be included in your customised setup.

Daily management, supervision and commissioning are straightforward with the intuitive and simple-to-use user interface. This saves you valuable time when getting started and in your daily interaction with Pumps and the controller. The controller integrates seamlessly into the Grundfos range of communication modules, ensuring an simple fit into any supervisory installation such as SCADA or Grundfos Cloud.

The controller keeps a detailed alarm and warning log with the last 20 alerts. The alarm log can be accessed remotely via SCADA or Grundfos Cloud. You can also use Grundfos GO to inspect the logs in localised, translated text for simple troubleshooting and remedial measures at the Pumping station.

The LC 242 controller enables:

• Suitable for Community water supply
• Approvals include CE,EAC,UKCA,MOROCCO

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.