-
GR-98057242
Grundfos - UPS 40-50FN Domestic Hot Water Circulator Pump - Stainless SteelUPS 40-50 FN 250
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
GR-98057249
Grundfos - UPS 32-100N Hot Water Service Circulator - 240V - Stainless SteelUPS 32-100 N 180
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic radial bearing assembly
- Stainless Steel shaft
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
GR-98057227
Grundfos - UPS 25-80N (180) Hot Water Circulator Pump - 240V - Stainless SteelUPS 25-80 N 180
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
GR-95906772
Grundfos - UPS 25-55N Hot Water Service Circulator - 240V - Stainless SteelUPS 25-55 N 180
The pump unit is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:
- Stainless Steel pump housing
- corrosion-protected impeller, Composite
- Stainless Steel rotor can and bearing plate
- Carbon axial bearing
- Ceramic shaft and radial bearings
The motor is a 1-phase motor. No additional motor protection is required.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
99222089
Grundfos - TP 65-120/2 A-F-A-BQBE Commercial Circulator - 400VTP 65-120/2 A-F-A-BQBE-GW1
Single-stage, close-coupled, volute Pump with in-line suction and discharge ports of identical diameter. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. The Pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The Pump is equipped with a fan-cooled asynchronous motor.
- Suitable for Commercial air conditioning,
- This product's housing material is Cast Iron
- The impeller is manufactured from Stainless Steel
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: 0 .. 140 °C.
In stock
Free Standard Delivery
-
96384247
Grundfos - TP 50-90/4 A F A BQQE 0.55kW In-Line Circulator Pump - 240V - Single Phase - 333 Ltr/min. - Cast IronTP 50-90/4 A-F-A-BQQE-EW3
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
GR-98707848
Grundfos - UPS2 25-80 Heating Circulator Pump - 240V - Cast IronGrundfos central heating circulators cover a wide selection of circulator pumps designed for circulating liquids in heating systems, including modern high-efficiency electronic circulators and legacy three-speed models (range dependent).
In stock
Free Standard Delivery
98957980
Grundfos - TP 50-60/2 B In-Line Hot Water Circulator Pump - 240V - Single Phase - 417 Ltr/min. - Stainless SteelTP 50-60/2 A-F-Z-BQQE-DW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery
98610035
Grundfos - TP 50-180/2 A-F-Z-BQQE-FX1 In-Line Hot Water Circulator Pump - 240V - Single Phase - 500 Ltr/min. - Stainless SteelTP 50-180/2 A-F-Z-BQQE-FW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery
96405855
Grundfos - UPC/D 40-120 and UPS/D 32-120/2, 40-60/4, 50-60/2 Replacement Termin.al Box - 240VService special
In stock
Free Standard Delivery
GR-98707851
Grundfos - UPS2 32-80 Heating Circulator Pump - 240V - 180mm - Cast IronUPS2 32-80 180
High-efficiency circulator pump unit with permanent-magnet motor (ECM technology) fit for the ErP directive no. 641/2009 due to continuous variable-speed control for circulation of clean heating water according to VDI 2035.
Features and benefits: UPS2 32-80 180
High-efficiency circulator pump with permanent-magnet motor (ECM technology) complying with the ErP directive no. 641/2009 thanks to continuous variable-speed control. appropriate for circulation of clean heating water according to VDI 2035.
Features and benefits:
- reduced installation costs as no external motor protection is required
- no corrosion issues thanks to the electrocoated pump housing
- one button for uncomplicated selection among three proportional-pressure curves or three fixed speeds
- complies with the German regulation on energy saving in buildings and building systems – Energieeinsparverordnung – EnEV §14(3)
- high energy savings thanks to an energy efficiency index (EEI) lower than 0.23
- for tight installations, in, for example, boiler applications
- it is available as pump head without pump housing. Fits all 4-m, 5-m and 6-m pump housings of the Series 100
- one pump replaces three variants
- complies with the requirements of the ErP directive as from 2015
Suitable for: Commercial heating
In stock
Free Standard Delivery
98760135
Grundfos - TP 50-120/4 A F A BQQE 1.1kW In-Line Circulator Pump - 240V - Single Phase - 492 Ltr/min. - Cast IronTP 50-120/4 A-F-A-BQQE-GW3
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
98957983
Grundfos - TP 50-120/2 B In-Line Hot Water Circulator Pump - 240V - Single Phase - 433 Ltr/min. - Stainless SteelTP 50-120/2 A-F-Z-BQQE-FW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery
98346645
Grundfos - TP 40-80/2 S In-Line Hot Water Circulator Pump - 240V - Single Phase - 183 Ltr/min. - Stainless SteelTP 40-80/2 A-F-I-BQQE-CW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery
98282358
Grundfos - TP 40-80/2 A F A BQQE 0.25kW In-Line Circulator Pump - 240V - Single Phase - 183 Ltr/min. - Cast IronTP 40-80/2 A-F-A-BQQE-CW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
98957961
Grundfos - TP 40-60/2 B In-Line Hot Water Circulator Pump - 240V - Single Phase - 266 Ltr/min. - Stainless SteelTP 40-60/2 A-F-Z-BQQE-CW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery















