-
GR-MD300200
Grundfos - Home Booster Packaged Pumping System - 230V - 3 Bar.The Home Booster unit incorporates an integrated 200 litre storage tank, providing a usable capacity of 180 litres and complete with a Type AB air gap in full compliance with Water Byelaws regulations. This design ensures secure separation from the mains supply while maintaining a reliable and protected water reserve.
A high-grade Stainless Steel pump is fitted as standard, delivering efficient performance, consistent pressure, extended service life and low-noise operation. For properties with increased demand, or where incoming mains pressure results in slow tank replenishment, an additional 180 litre slave storage tank can be specified to expand overall capacity and improve system resilience.
Supplied with a 2 Year Warranty.
This unit runs at 230V.Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
£5,890.80 RRP £1,966.80 £1,639.00
In stock
Free Standard Delivery
-
GR-MD450200
Grundfos - Home Booster Packaged Pumping System - 230V - 4.5 Bar. VersionThe Home Booster unit incorporates an integrated 200 litre storage tank, providing a usable capacity of 180 litres and complete with a Type AB air gap in full compliance with Water Byelaws regulations. This design ensures secure separation from the mains supply while maintaining a reliable and protected water reserve.
A high-grade Stainless Steel pump is fitted as standard, delivering efficient performance, consistent pressure, extended service life and low-noise operation. For properties with increased demand, or where incoming mains pressure results in slow tank replenishment, an additional 180 litre slave storage tank can be specified to expand overall capacity and improve system resilience.
Supplied with a 2 Year Warranty.
This unit runs at 230V.Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
£5,938.80 RRP £2,220.00 £1,850.00
In stock
Free Standard Delivery
-
GF-96787446
Grundfos - Watermill Amazon STP - 1.5 Bar. Brass Twin Impeller Positive Head Shower Pump - 230V - 19m HeadThe Grundfos - Watermill Amazon STP - 1.5 Bar. delivers a maximum head of 19m and runs at 230V. It is manufactured in Brass.
£1,116.00 RRP £384.41 £320.34
2-3 day delivery
Free Standard Delivery
-
GF-96787450
Grundfos - Watermill Amazon SSP - 2.0 Bar. (AP028) Brass Single Impeller Heavy Duty Positive Head Shower Pump - 230V - 24m HeadThe Grundfos - Watermill Amazon SSP - 2.0 Bar. delivers a maximum head of 24m and runs at 230V. It is manufactured in Brass.
£817.20 RRP £269.57 £224.64
In stock
Free Standard Delivery
-
GF-96787462
Grundfos - Watermill Amazon STP - 2.0 Bar. (AP030) Brass Twin Impeller Heavy Duty Positive Head Shower Pump - 230V - 24m HeadThe Grundfos - Watermill Amazon STP - 2.0 Bar. delivers a maximum head of 24m and runs at 230V. It is manufactured in Brass.
£1,159.20 RRP £399.40 £332.83
In stock
Free Standard Delivery
-
GF-96787464
Grundfos - Watermill Amazon SSP - 3.0 Bar. Brass Single Impeller Positive Head Shower Pump - 230V - 32m HeadThe Grundfos - Watermill Amazon SSP - 3.0 Bar. delivers a maximum head of 32m and runs at 230V. It is manufactured in Brass.
£812.40 RRP £279.58 £232.98
In stock
Free Standard Delivery
-
GF-96787466
Grundfos - Watermill Amazon STP - 3.0 Bar. (AP029) Brass Twin Impeller Heavy Duty Positive Head Shower Pump - 230V - 35m HeadThe Grundfos - Watermill Amazon STP - 3.0 Bar. delivers a maximum head of 35m and runs at 230V. It is manufactured in Brass.
£1,347.60 RRP £464.28 £386.90
In stock
Free Standard Delivery
-
GF-96787471
Grundfos - Watermill Amazon STP - 4.0 Bar. (AP052) Brass Twin Impeller Heavy Duty Positive Head Shower Pump - 230V - 40m HeadThe Grundfos - Watermill Amazon STP - 4.0 Bar. delivers a maximum head of 40m and runs at 230V. It is manufactured in Brass.
£1,464.00 RRP £504.23 £420.19
In stock
Free Standard Delivery
-
GF-96787503
Grundfos - Watermill Amazon Universal STN - 1.5 Bar. Twin Impeller Negative Head 'Extra Quiet' Shower Pump - 230V - 19m HeadThe Grundfos - Watermill Amazon Universal STN - 1.5 Bar. delivers a maximum head of 19m and runs at 230V. It is manufactured in Brass.
£1,626.00 RRP £559.14 £465.95
In stock
Free Standard Delivery
-
GF-96787504
Grundfos - Watermill Amazon Universal SSN - 2.0 Bar. (AP053) Brass Single Impeller Heavy Duty Negative Head Shower Pump - 230V - 24m HeadThe Grundfos - Watermill Amazon Universal SSN - 2.0 Bar. delivers a maximum head of 24m and runs at 230V. It is manufactured in Brass.
£1,102.80 RRP £379.39 £316.16
In stock
Free Standard Delivery
-
GF-96787505
Grundfos - Watermill Amazon Universal STN - 2.0 Bar. (AP054) Brass Twin Impeller Heavy Duty Negative Head Shower Pump - 230V - 24m HeadThe Grundfos - Watermill Amazon Universal STN - 2.0 Bar. delivers a maximum head of 24m and runs at 230V. It is manufactured in Brass.
£1,669.20 RRP £574.12 £478.43
In stock
Free Standard Delivery
-
GF-96787512
Grundfos - Watermill Amazon Universal SSN - 3.0 Bar. Single Impeller Negative Head 'Extra Quiet' Shower Pump - 230V - 34m HeadThe Grundfos - Watermill Amazon Universal SSN - 3.0 Bar. delivers a maximum head of 34m and runs at 230V. It is manufactured in Brass.
£1,147.20 RRP £394.39 £328.66
In stock
Free Standard Delivery
-
GF-96788173
Grundfos - Watermill Amazon Universal STN - 3.0 Bar. Twin Impeller Negative Head 'Extra Quiet' Shower Pump - 230V - 35m HeadThe Grundfos - Watermill Amazon Universal STN - 3.0 Bar. delivers a maximum head of 35m and runs at 230V. It is manufactured in Brass.
£1,785.60 RRP £614.04 £511.70
In stock
Free Standard Delivery
-
GF-96788176
Grundfos - Watermill Amazon Universal STN - 4.0 Bar. Twin Impeller Negative Head 'Extra Quiet' Shower Pump - 230V - 42m HeadThe Grundfos - Watermill Amazon Universal STN - 4.0 Bar. delivers a maximum head of 42m and runs at 230V. It is manufactured in Brass.
£1,902.00 RRP £654.00 £545.00
In stock
Free Standard Delivery
-
98427008
Grundfos - Hydro MPC-E 2 CRE32-1-1 U1 D-A-A-GHJ Booster Set - 400V - Three Phase - 1601 Ltr/min. - 11kWHydro MPC-E 2 CRE 32-1-1
Pressure booster system supplied as space-efficient assembly according to DIN standard 1988/T5.
All pumps are speed-controlled.
From 0.37 to 11 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with electronically commutated permanent-magnet motors with extremely high efficiency. The total efficiency of the motor including the frequency converter applies to IE5 level in IEC60034-31.
From 15 to 22 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with motors with integrated frequency control. The total efficiency of the motor including the frequency converter is better than the IE3 level in IEC60034-31, even though this standard only applies to the motor.
- Pump changeover is self-operating and depends on load, time and fault
- The system performance is adapted to the demand through cutting in/out the required number of pumps and through parallel control of the pumps in operation
- Hydro MPC-E maintains a constant pressure through continuous adjustment of the speed of the pumps
The system consists of these parts:
:vertical, multi-stage, centrifugal pumps, type CRE 32-1-1
Pump parts in contact with the pumped liquid are made of Stainless Steel EN DIN 1.4301 Pump bases and heads are of either Cast Iron/Stainless Steel (CRI) or Cast Iron EN-GJS-500-7 (CR), depending on pump type; other vital parts are made of Stainless Steel EN DIN 1.4301 The pumps are equipped with a service-friendly cartridge shaft seal, HQQE (SiC/SiC/EPDM)- Control MPC in a steel cabinet, IP54, including main switch, all required fuses, motor protection, switching equipment and microprocessor-controlled CU 352
- Pressure gauge and pressure transmitter (analog output 4-20 mA)
- Adapter with isolating valve for connection of diaphragm tank
- Non-return valves are certified according to DVGW, isolating valves according to DIN and DVGW
- One non-return valve (POM) and two isolating valves for each pump
- Stainless Steel base frame to EN DIN 1.4301 up to CR 90; above CR 90 the pumps are placed on a galvanized I-Beam frame
- Two Stainless Steel manifolds to EN DIN 1.4571
Dry-running protection and diaphragm tank are available according to the list of accessories.
Pump operation is controlled by Control MPC with the following functions:
- Grundfos bus communication
- Potential-free changeover contacts for operation and fault
- Green indicator light for operating indications and red indicator light for fault indications
- Colour screen display
- Display and indication functions:
- Alarm log with the previous 24 warnings/alarms
- Sensors and cables monitored for malfunction
- Motor protection
- Non-return valve monitoring
- Inlet pressure
- Minimum and maximum limits of current value
- Pump and system monitoring functions:
- Digital inputs and outputs can be configured individually
- Up to 6 alternative setpoints
- Max., min. or user-defined duty
- System on/off
- Possibility of digital remote-control functions:
- Setpoint ramp
- Log function
- Possibility of external setpoint influence
- Manual operation
- Multi-sensor (up to 6 sensors to influence the setpoint)
- Secondary sensor (Possible to switch to another sensor/setpoint)
- Possibility of backup sensor (redundant primary sensor)
- Possibility of standby pump allocation
- self-operating pump test function to prevent idle pumps from seizing up
- Selection of min. time between start/stop, self-operating pump changeover and pump priority
- self-operating cascade control of pumps for optimum efficiency
- On/off operation at low flow
- Soft pressure build-up (To prevent water hammer during startup)
- Constant pressure at setpoint, independent of inlet pressure
- PID controller with adjustable PI parameters (Kp + Ti)
- Constant-pressure control through continuously variable adjustment of the speed of each individual pump
- Intelligent multipump controller, CU 352
It is possible to add CIM communication modules for communicating with Scada/BMS.
Pumps, piping, cabling complete as well as Control MPC are mounted on the base frame. The booster system has been preset and tested.
There are options to upgrade the pressure boosting system.
Suitable for: Commercial heating, Commercial water pressure boosting, District heating, District cooling, Industrial cleaning process, Industrial heating, Industrial cooling, Industrial water supply and transfer, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment
£27,566.40 RRP £20,399.14 £16,999.28
In stock
Free Standard Delivery
-
99257340
Grundfos - Hydro MPC-E 2 CRE32-2 U1 D-A-A-GHJ Booster Set - 400V - Three Phase - 1601 Ltr/min. - 11kWHydro MPC-E 2 CRE 32-2
Pressure booster system supplied as space-efficient assembly according to DIN standard 1988/T5.
All pumps are speed-controlled.
From 0.37 to 11 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with electronically commutated permanent-magnet motors with extremely high efficiency. The total efficiency of the motor including the frequency converter applies to IE5 level in IEC60034-31.
From 15 to 22 kW, the booster system is equipped with CR, CRE, CRI, CRIE pumps with motors with integrated frequency control. The total efficiency of the motor including the frequency converter is better than the IE3 level in IEC60034-31, even though this standard only applies to the motor.
- Pump changeover is self-operating and depends on load, time and fault
- The system performance is adapted to the demand through cutting in/out the required number of pumps and through parallel control of the pumps in operation
- Hydro MPC-E maintains a constant pressure through continuous adjustment of the speed of the pumps
The system consists of these parts:
:vertical, multi-stage, centrifugal pumps, type CRE 32-2
Pump parts in contact with the pumped liquid are made of Stainless Steel EN DIN 1.4301 Pump bases and heads are of either Cast Iron/Stainless Steel (CRI) or Cast Iron EN-GJS-500-7 (CR), depending on pump type; other vital parts are made of Stainless Steel EN DIN 1.4301 The pumps are equipped with a service-friendly cartridge shaft seal, HQQE (SiC/SiC/EPDM)- Control MPC in a steel cabinet, IP54, including main switch, all required fuses, motor protection, switching equipment and microprocessor-controlled CU 352
- Pressure gauge and pressure transmitter (analog output 4-20 mA)
- Adapter with isolating valve for connection of diaphragm tank
- Non-return valves are certified according to DVGW, isolating valves according to DIN and DVGW
- One non-return valve (POM) and two isolating valves for each pump
- Stainless Steel base frame to EN DIN 1.4301 up to CR 90; above CR 90 the pumps are placed on a galvanized I-Beam frame
- Two Stainless Steel manifolds to EN DIN 1.4571
Dry-running protection and diaphragm tank are available according to the list of accessories.
Pump operation is controlled by Control MPC with the following functions:
- Grundfos bus communication
- Potential-free changeover contacts for operation and fault
- Green indicator light for operating indications and red indicator light for fault indications
- Colour screen display
- Display and indication functions:
- Alarm log with the previous 24 warnings/alarms
- Sensors and cables monitored for malfunction
- Motor protection
- Non-return valve monitoring
- Inlet pressure
- Minimum and maximum limits of current value
- Pump and system monitoring functions:
- Digital inputs and outputs can be configured individually
- Up to 6 alternative setpoints
- Max., min. or user-defined duty
- System on/off
- Possibility of digital remote-control functions:
- Setpoint ramp
- Log function
- Possibility of external setpoint influence
- Manual operation
- Multi-sensor (up to 6 sensors to influence the setpoint)
- Secondary sensor (Possible to switch to another sensor/setpoint)
- Possibility of backup sensor (redundant primary sensor)
- Possibility of standby pump allocation
- self-operating pump test function to prevent idle pumps from seizing up
- Selection of min. time between start/stop, self-operating pump changeover and pump priority
- self-operating cascade control of pumps for optimum efficiency
- On/off operation at low flow
- Soft pressure build-up (To prevent water hammer during startup)
- Constant pressure at setpoint, independent of inlet pressure
- PID controller with adjustable PI parameters (Kp + Ti)
- Constant-pressure control through continuously variable adjustment of the speed of each individual pump
- Intelligent multipump controller, CU 352
It is possible to add CIM communication modules for communicating with Scada/BMS.
Pumps, piping, cabling complete as well as Control MPC are mounted on the base frame. The booster system has been preset and tested.
There are options to upgrade the pressure boosting system.
Suitable for: Commercial heating, Commercial water pressure boosting, District heating, District cooling, Industrial cleaning process, Industrial heating, Industrial cooling, Industrial water supply and transfer, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment
£39,337.20 RRP £29,109.53 £24,257.94
In stock
Free Standard Delivery
Grundfos
(12168 products)
Filters Products
Filters Products