KSB

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB AMA Porter 501 SE Submersible Drainage Pump - Single Phase - With Float is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min. The maximum head for this pump is 10m. It also features a Float Switch.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 502 SE Submersible Drainage Pump - Single Phase - With Float Switch is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min. It features a Float Switch.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 503 SE Submersible Drainage Pump - Single Phase - With Float Switch is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min. The maximum head for this pump is 16m. It also features a Float Switch.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB AMA Porter 601 SE Submersible Drainage Pump - Single Phase - With Float Switch is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min. The maximum head for this pump is 21m. It also features a Float Switch.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 602 SE Submersible Drainage Pump - Single Phase - With Float Switch is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min. The maximum head for this pump is 21m. It also features a Float Switch.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB AMA Porter 501 NE Submersible Drainage Pump - Single Phase - Without Float Switch is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 283 Ltr/min.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB AMA Porter 502 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 283 Ltr/min.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 503 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 601 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 500 Ltr/min. The maximum head for this pump is 8m.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 602 NE Submersible Drainage Pump - Single Phase - Without Float Switch is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min. The maximum head for this pump is 21m.

Design:

The KSB AmaDrainer N 301 SE/NE Submersible Dirty Water Pump - 240v is a Submersible product. This product is manufactured by KSB. Voltage for this item is 240V. It is supplied with a 10m cable. It has an actual flow rate of 165 Ltr/min. The maximum head for this pump is 6.5m. It also features a Float Switch.

Design:

The KSB AmaDrainer N 302 SE/NE Submersible Dirty Water Pump - 240v is a Submersible product. This product is manufactured by KSB. Voltage for this item is 240V. It is supplied with a 10m cable. It has an actual flow rate of 210 Ltr/min. The maximum head for this pump is 10m. It also features a Float Switch.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 603 SE Submersible Drainage Pump - Single Phase - With Float Switch is a Submersible product. It has an actual flow rate of 283 Ltr/min. The maximum head for this pump is 21m. It also features a Float Switch.

Applications Technical Specifications The KSB Ama Porter 603 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible item. This product is manufactured by KSB.

The KSB AMA Porter SB 545 NE is a vertical, single-stage, fully floodable submersible wastewater pump made of grey Cast Iron.

It is engineered to handle various types of wastewater, especially those containing long fibres, solid substances, and fluids with gas or air. This product is manufactured by KSB. This pump is particularly appropriate for removing wastewater from flooded rooms or surfaces and is applied in applications such as water, wastewater/sewage, and building services.

The pump is recommended for applications such as pumping wastewater containing solid matter or domestic sewage from toilets, washing machines, and dishwashers, as well as for surface water or rainwater pumping from car parks or other uneven surfaces, and drainage of sumps and cellars prone to flooding.

The KSB AMA Porter SB 545 NE Submersible Cutter Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 240V. It is supplied with a 10m cable. The maximum head for this pump is 21m.