KSB

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB AMA Porter 601 ND Submersible Drainage Pump - 3 Phase - Without Float Switch is a Submersible product. Voltage for this item is 400V. It has an actual flow rate of 283 Ltr/min. The maximum head for this pump is 21m.

Applications Installation Kit Not Included It is recommended to purchase the Portable Installation Kit, which includes a hosetail, feet, and fixings, for optimal performance.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB AMA Porter 501 NE Submersible Drainage Pump - Single Phase - Without Float Switch is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 283 Ltr/min.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB AMA Porter 502 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 283 Ltr/min.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 503 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 601 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 500 Ltr/min. The maximum head for this pump is 8m.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 602 NE Submersible Drainage Pump - Single Phase - Without Float Switch is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min. The maximum head for this pump is 21m.

The KSB Portable Installation Kit for AMA-Porter 500 Series Pumps is a Spares item.

• 3 x Rigid Steel Feet with fittings
• 1 x Hose Tail
• 1 x Elbow
• 1 x Hose Clip
• To Suit 2½" ID hose

KSB (est. 1871) is a German manufacturer of pumps and valves for water, wastewater and industry. Product ranges include centrifugal process pumps, booster systems and submersible sewage pumps. Typical applications include public water treatment, building services, industrial processing and power-generation-related water duties.

The pump is appropriate for various applications, including:

The AMA-Porter 601 ND offers several advantages:

This pump model does not come with a float switch

The KSB AMA Porter 601 ND Submersible Drainage Pump - 3 Phase - 20 M Cable is a Submersible product. This product is manufactured by KSB. Voltage for this item is 415V. It is supplied with a 20m cable. The maximum head for this pump is 8m.

Applications Technical Specifications The KSB Ama Porter 603 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible item. This product is manufactured by KSB.

Performance: Electrical Specifications: Applications: Additional Features: The KSB AMA Porter 503 ND Submersible Drainage Pump - 3 Phase - No Float Switch is a Submersible item. This product is manufactured by KSB.

This pump is well-suited for both residential and commercial wastewater management needs, offering a reliable solution for handling challenging wastewater tasks.

The KSB Ama Porter 603 ND Submersible Drainage Pump - Three Phase - No Float Switch is a Submersible product. This product is manufactured by KSB. Voltage for this item is 415V. It is supplied with a 10m cable. The maximum head for this pump is 13m.

The KSB AMA-Porter S 545 ND is a submersible cutter pump engineered for handling wastewater containing solids, appropriate for domestic or light commercial applications.

This pump is a vertical, single-stage, fully floodable unit made of grey Cast Iron. This product is manufactured by KSB. It operates at a power of 1.5 KW and is designed to work with a 400V power supply. The pump comes with a 10-meter cable and does not include a float switch.

The design of the KSB AMA-Porter S 545 ND makes it particularly effective for wastewater management, as it is built to handle solid substances efficiently. This pump is part of the Ama-Porter range, known for its reliability in submersible applications.

The KSB AMA Porter S 545 ND Submersible Cutter Pump - Three Phase - No Float Switch is a Submersible product. Voltage for this item is 415V. It is supplied with a 10m cable. The maximum head for this pump is 21m.

The KSB AMA Porter SB 545 NE is a vertical, single-stage, fully floodable submersible wastewater pump made of grey Cast Iron.

It is engineered to handle various types of wastewater, especially those containing long fibres, solid substances, and fluids with gas or air. This product is manufactured by KSB. This pump is particularly appropriate for removing wastewater from flooded rooms or surfaces and is applied in applications such as water, wastewater/sewage, and building services.

The pump is recommended for applications such as pumping wastewater containing solid matter or domestic sewage from toilets, washing machines, and dishwashers, as well as for surface water or rainwater pumping from car parks or other uneven surfaces, and drainage of sumps and cellars prone to flooding.

The KSB AMA Porter SB 545 NE Submersible Cutter Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 240V. It is supplied with a 10m cable. The maximum head for this pump is 21m.