Lowara

The Lowara 33SV3/2AG055T/D is a three phase vertical multistage pump with a 2 pole, 5. 5kW motor and AISI 304 round flanges. This product is manufactured by Lowara.

Cast Iron peripheral booster pump

The Lowara P40/D 230/400 Booster Pump is a Circulator Pump item.

Lowara (est. 1968) is an Italian pump brand, now part of Xylem, specialising in Stainless Steel centrifugal and multistage pumps, plus boosters and borehole solutions. Typical applications include pressure boosting, HVAC circulation, irrigation, clean-water transfer and light industrial duties where corrosion resistance and reliable hydraulic performance are required.

The Lowara ESHE 40-160/30/P25RSSA is a three phase aggressive liquid pump. This product is manufactured by Lowara. The Lowara SH range are single-impeller pumps which can handle moderately aggressive liquids.

The Lowara e-SV are a widely applied WRAS approved vertical multistage pump family with a vast number of versions and potential applications. This product is manufactured by Lowara.

Extra Efficient

The e-SV's newly-engineered hydraulics, combined with a high-effi ciency motor (IE2) deliver maximum efficiency.

Easy to Maintain

The e-SV's new design enables removal of the mechanical seal without having to remove the motor, reducing repair time by up to 50%. A standard DIN mechanical seal, wearing components, service tools and standard IEC motors enable faster and easier maintenance and servicing.

Energy Saving

Pumps are among the largest users of industrial energy. Do your part to reduce CO2 emissions and your impact on the environment - and improve your bottom line - by taking advantage of the new e-SV's lower energy requirement. Use a new e-SV pump along with a variable speed drive such as Xylem's Hydrovar®, and save even more energy and money

The Lowara 3SV16F015T/D Vertical Multistage Pump - 3 Phase is a Multistage pump. Voltage for this item is 400V. The maximum head for this pump is 120m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The Lowara e-SV are a widely applied WRAS approved vertical multistage pump family with a vast number of versions and potential applications. This product is manufactured by Lowara.

Extra Efficient

The e-SV's newly-engineered hydraulics, combined with a high-effi ciency motor (IE2) deliver maximum efficiency.

Easy to Maintain

The e-SV's new design enables removal of the mechanical seal without having to remove the motor, reducing repair time by up to 50%. A standard DIN mechanical seal, wearing components, service tools and standard IEC motors enable faster and easier maintenance and servicing.

Energy Saving

Pumps are among the largest users of industrial energy. Do your part to reduce CO2 emissions and your impact on the environment - and improve your bottom line - by taking advantage of the new e-SV's lower energy requirement. Use a new e-SV pump along with a variable speed drive such as Xylem's Hydrovar®, and save even more energy and money

The Lowara 3SV05T005M Vertical Multistage Pump - Single Phase is a Multistage pump. Voltage for this item is 240V. The maximum head for this pump is 37m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The operating pressure of this is 16 bar.

The Lowara ESHE 32-250/75/P25VSNA is a three phase aggressive liquid pump. This product is manufactured by Lowara. The Lowara SH range are single-impeller pumps which can handle moderately aggressive liquids.

Higher hydraulic efficiency Borehole pumps for 4³ wells that set the basis for lower operational costs.

Premium efficiency pumps compliant with the ErP directive. This product is manufactured by Lowara. Abrasion resistant construction combined with floating impellers ensure optimum resistance to wear (maximum permissible quantity of sand 150 g/m3 ) making this one of the best pumps on the market for sand handling capabilities. The Stainless Steel structure of the pump ensures high resistance to corrosion with a built in non-return valve and cable guard attachment.

The upper and lower supports are made of precision-cast Stainless Steel. The hexagonal pump shaft guarantees an effective impeller drive.

The Lowara 4GS11M-L4C Submersible Well Pump - 4 inch - Single Phase is a Well Pump item. Voltage for this item is 240V. The maximum head for this pump is 112m.

The operating pressure of this is 16 bar.

The HME pump is a non-self priming horizontal multistage pump coupled with eSM drive. This product is manufactured by Lowara. The pump casing is available with different configurations and connection types.

The Lowara Presfix 228 Pressurisation Unit - Twin Pump - 2.8 bar. is a Pressurisation Unit item. This product is manufactured by Lowara. Voltage for this item is 240V.

Available with free delivery from Pumpify, these units are developed to replace water that has been lost through system leakage and to maintain the system design fill pressure in sealed heating and chilled water systems.

Presfix units also provide safety circuits locking out the boiler / chiller in the advent of high/ low pressures occurring.

Lowara Presfix Beta Mk 2 Twin Pump Enclosed Microprocessor Pressurisation Set (max.

F/P 2.8 Bar).

Specifications

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 1SC6/05/5 C L20 Scuba Submersible Pump - 230v - Single Phase - Without Float is a Submersible product. Voltage for this item is 230V. It is supplied with a 20m cable. It has an actual flow rate of 40 Ltr/min. The maximum head for this pump is 56m.

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 1SC9/09/5 C L20 Scuba Submersible Pump - 230v - Single Phase - Without Float is a Submersible product. Voltage for this item is 230V. It is supplied with a 20m cable. It has an actual flow rate of 40 Ltr/min. The maximum head for this pump is 91m.

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 3SC4/05/5 C L20 Scuba Submersible Pump - 230v - Single Phase - Without Float is a Submersible product. Voltage for this item is 230V. It is supplied with a 20m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 45m.

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 3SC7/09/5 C L20 Scuba Submersible Pump - 230v - Single Phase - Without Float is a Submersible product. Voltage for this item is 230V. It is supplied with a 20m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 77m.

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 5SC3/05/5 C L20 Scuba Submersible Pump - 230v - Single Phase - Without Float is a Submersible product. Voltage for this item is 230V. It is supplied with a 20m cable. It has an actual flow rate of 120 Ltr/min. The maximum head for this pump is 35m.

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 5SC4/07/5 C L20 Scuba Submersible Pump - 230v - Single Phase - Without Float is a Submersible product. Voltage for this item is 230V. It is supplied with a 20m cable. It has an actual flow rate of 120 Ltr/min. The maximum head for this pump is 46m.

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 5SC5/09/5 C L20 Scuba Submersible Pump - 230v - Single Phase - Without Float is a Submersible product. Voltage for this item is 230V. It is supplied with a 20m cable. It has an actual flow rate of 120 Ltr/min. The maximum head for this pump is 58m.