Mikrofill

The Mikrofill Extreme 500 Hot Water Loading System is a high-performance DHW generator that blends the benefits of an instantaneous water heater with a storage cylinder, creating an efficient partnership between a condensing boiler and hot water storage.

Its operating principle overcomes the drawbacks of traditional coil-type cylinders and actively optimises condensing boiler efficiency during hot water production. The Extreme's Injection Dynamics technology delivers rapid, clean heat transfer for faster recovery and draw-off.

• Hybrid DHW generator — instantaneous performance with storage resilience
• Injection Dynamics for rapid heat-up and stable delivery
• High output — up to 2570 Ltrs/hour at 60 °C
• 500 Ltrs. storage capacity, for peak demand

Built with premium materials and flexible by design, the Extreme suits both new-build and retrofit projects and is straightforward to install thanks to pre-wired controls and comprehensive insulation.

The MIKROFILL MAXI UHP AP 180 Pressurisation Unit is a high-capacity, floor-standing solution for sealed LPHW, CHW, refrigeration and industrial cooling systems. Single (duty) or twin (duty/standby) pump configurations pair with Ai100 digital control for precise, reliable pressure management.

BMS-ready as standard, MAXI UHP AP integrates via Modbus RTU and 4 programmable volt-free relays, while Category 5 backflow protection (Type AB air gap with weir overflow and warning pipe) safeguards water quality. A compact, robust, powder-coated steel enclosure with adjustable feet simplifies installation and commissioning.

• Sealed systems up to 300,000 Ltrs
• Cold fill options: approx. 3.9–8.0 Bar (model dependent)
• Ai100 microprocessor control with full status indication
• BMS integration: Modbus RTU + 4 volt-free relays

Designed for long-term performance, MAXI UHP AP features self-diagnostic electronics, leak detection (frequency-of-starts alarm), and high-quality peripheral pump(s) to keep large systems running at peak efficiency.

MikroPro Potable XP Expansion Vessel - 12 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

MikroPro Potable XP Expansion Vessel - 19 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

MikroPro Potable XP Expansion Vessel - 24 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

MikroPro Potable XP Expansion Vessel - 50 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

MikroPro Potable XP Expansion Vessel - 60 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

MikroPro Potable XP Expansion Vessel - 80 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

MikroPro Potable XP Expansion Vessel - 100 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

MikroPro Potable XP Expansion Vessel - 200 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

MikroPro Potable XP Expansion Vessel - 300 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

MikroPro Potable XP Expansion Vessel - 500 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

The Mikrofill MAXI AP 280 Pressurisation Unit is a high-capacity, floor-standing solution for large domestic, commercial and industrial sites. It maintains stable pressure across sealed LPHW, CHW, refrigeration and industrial cooling systems.

Quick to install and commission, MAXI AP 280 uses an advanced microprocessor-controlled platform with Ai100 technology for accurate, efficient management. Choose single or twin-pump configurations with intuitive digital controls and real-time status.

• BMS-ready: Modbus RTU plus 4 programmable volt-free relays
• Cold fill options: up to 3.9“8.0 Bar (model dependent)
• Protection: Category 5 backflow with Type AB air gap
• Robust build: powder-coated steel casing with adjustable feet

Self-diagnostics and leak detection (frequency-of-starts alarm) support long-term reliability, while enhanced models integrate seamlessly with Building Management Systems.

The MIKROFILL MAXI AP 180 RH is a high-capacity, floor-standing pressurisation unit for large domestic, commercial and industrial sites. It maintains stable pressure across sealed LPHW, CHW, refrigeration and industrial cooling systems. This unit is Right Hand entry.

Quick to install and commission, MAXI AP 180 RH uses an advanced microprocessor-controlled platform with Ai100 technology for accurate, efficient management. Choose single or twin-pump configurations with intuitive digital controls and real-time status indication.

• BMS-ready: Modbus RTU plus 4 programmable volt-free relays
• Cold fill options: up to 3.9–8.0 Bar (model dependent)
• Protection: Category 5 backflow with Type AB air gap
• Robust build: powder-coated steel casing with adjustable feet

Self-diagnostics and leak detection (frequency-of-starts alarm) support long-term reliability, while enhanced models integrate seamlessly with Building Management Systems.

The Mikrofill MAXI AP 280 Pressurisation Unit RH is a high-capacity, floor-standing solution for large domestic, commercial and industrial sites. It maintains stable pressure across sealed LPHW, CHW, refrigeration and industrial cooling systems. This unit is a right hand entry.

Quick to install and commission, MAXI AP 280 uses an advanced microprocessor-controlled platform with Ai100 technology for accurate, efficient management. Choose single or twin-pump configurations with intuitive digital controls and real-time status.

• BMS-ready: Modbus RTU plus 4 programmable volt-free relays
• Cold fill options: up to 3.9“8.0 Bar (model dependent)
• Protection: Category 5 backflow with Type AB air gap
• Robust build: powder-coated steel casing with adjustable feet

Self-diagnostics and leak detection (frequency-of-starts alarm) support long-term reliability, while enhanced models integrate seamlessly with Building Management Systems.