Mikrofill

Mikrofill - 35 Water Pressurisation Package - 35 Litre - 4.7 bar - Single Phase - 230V is a water pressurisation package for maintaining boosted water pressure in domestic and commercial systems.

The Mikrofill 3 Pressurisation Unit - EFD120021 is a Pressurisation Unit item. This product is manufactured by Mikrofill. Voltage for this item is 230V. It has an actual flow rate of 14 Ltr/min. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Unlike “pump type pressurisation units the Mikrofill 3 is developed to be connected directly to a buildings incoming mains/boosted water supply and fill a heating or chilled water system without the use of a pump.

The Mikrofill 3 utilises the energy already generated by the mains water or boosted water supply and does not contain an RPZ valve.

Pre – commissioned packages are available which include the Mikrofill 3 with appropriately sized vessels and service drain valves.

The operating pressure of this is 5 bar.

The Mikrofill MikroPro 8 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 8 Ltrs (3 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 8 Ltrs expansion vessel rated to 3 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 3 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

The Mikrofill MikroPro 12 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 12 Ltrs (3 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 12 Ltrs expansion vessel rated to 3 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 3 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

The Mikrofill MikroPro 18 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 18 Ltrs (3 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 18 Ltrs expansion vessel rated to 3 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 3 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

The Mikrofill MikroPro 25 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 25 Ltrs (3 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 25 Ltrs expansion vessel rated to 3 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 3 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

The Mikrofill MikroPro 250 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 250 Ltrs (6 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 250 Ltrs expansion vessel rated to 6 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 6 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

The Mikrofill MikroPro 500 is a space saving, compact sealed system pressurisation bundle for LPHW/CHW applications. It pairs the Mikrofill 3 advanced direct-type pressurisation unit (cold fill up to 4.7 Bar), a MikroPro 500 Ltrs (6 Bar) expansion vessel, and a ¾" quick-fit service valve.

The direct-fill design connects to the mains/boosted supply to automatically fill and top-up the system. A digital control system with LCD display simplifies setup, while a high-flow WRAS-approved fill valve, low energy use (10 Watts standby / 30 Watts running) and a fill volume indicator support efficient operation and water-treatment calculations.

• Direct-type pressurisation cold fill to 4.7 Bar
• MikroPro 500 Ltrs expansion vessel rated to 6 Bar
• Automatic system fill & top-up with LCD interface
• WRAS-approved high-flow fill valve

The MikroPro vessel is PED 97/23/EC compliant with a durable powder-coated finish and threaded connections; max operating temperature 70 C, typical max pressure 6 Bar (≤35 Ltrs) and up to 6 Bar (≤1000 Ltrs). Ideal for sealed heating and chilled-water systems, plus refrigeration and industrial cooling.

The MIKROFILL MAXI UHP AP 180 Pressurisation Unit is a high-capacity, floor-standing solution for sealed LPHW, CHW, refrigeration and industrial cooling systems. Single (duty) or twin (duty/standby) pump configurations pair with Ai100 digital control for precise, reliable pressure management.

BMS-ready as standard, MAXI UHP AP integrates via Modbus RTU and 4 programmable volt-free relays, while Category 5 backflow protection (Type AB air gap with weir overflow and warning pipe) safeguards water quality. A compact, robust, powder-coated steel enclosure with adjustable feet simplifies installation and commissioning.

• Sealed systems up to 300,000 Ltrs
• Cold fill options: approx. 3.9–8.0 Bar (model dependent)
• Ai100 microprocessor control with full status indication
• BMS integration: Modbus RTU + 4 volt-free relays

Designed for long-term performance, MAXI UHP AP features self-diagnostic electronics, leak detection (frequency-of-starts alarm), and high-quality peripheral pump(s) to keep large systems running at peak efficiency.

The Mikrofill MAXI PLUS AP 240 Pressurisation Dual Pump unit is a high-capacity, floor-standing pressurisation unit for large domestic, commercial and industrial sites. It maintains stable pressure across sealed heating, chilled water, refrigeration and industrial cooling systems.

Compact to install and quick to commission, MAXI AP uses an advanced microprocessor-controlled platform with Ai100 technology for accurate, efficient management. Choose single or twin-pump configurations with intuitive digital controls and real-time status.

• BMS-ready: Modbus RTU plus 4 programmable volt-free relays
• Precise control: stable, accurate pressure regulation
• Cold fill options: up to 3.9–8.0 Bar (model dependent)
• Category 5 backflow protection with Type AB air gap

A robust, powder-coated steel enclosure with adjustable feet and self-diagnostic electronics ensures dependable long-term performance and easy integration with Building Management Systems.

The Mikrofill MAXI AP 280 Pressurisation Unit is a high-capacity, floor-standing solution for large domestic, commercial and industrial sites. It maintains stable pressure across sealed LPHW, CHW, refrigeration and industrial cooling systems.

Quick to install and commission, MAXI AP 280 uses an advanced microprocessor-controlled platform with Ai100 technology for accurate, efficient management. Choose single or twin-pump configurations with intuitive digital controls and real-time status.

• BMS-ready: Modbus RTU plus 4 programmable volt-free relays
• Cold fill options: up to 3.9“8.0 Bar (model dependent)
• Protection: Category 5 backflow with Type AB air gap
• Robust build: powder-coated steel casing with adjustable feet

Self-diagnostics and leak detection (frequency-of-starts alarm) support long-term reliability, while enhanced models integrate seamlessly with Building Management Systems.

The MIKROFILL MAXI AP 140 RH Pressurisation Unit is a high-capacity, floor-standing solution for large domestic, commercial and industrial sites. It maintains stable pressure across sealed LPHW, CHW, refrigeration and industrial cooling systems. This unit is RIGHT HAND entry.

Quick to install and commission, MAXI AP uses an advanced microprocessor-controlled platform with Ai100 technology for accurate, efficient management. Choose single or twin-pump configurations with intuitive digital controls and real-time status indication.

• BMS-ready: Modbus RTU plus 4 programmable volt-free relays
• Cold fill options: up to 3.9–8.0 Bar (model dependent)
• Protection: Category 5 backflow with Type AB air gap
• Robust build: powder-coated steel casing with adjustable feet

Self-diagnostics and leak detection (frequency-of-starts alarm) support long-term reliability, while enhanced models integrate seamlessly with Building Management Systems.

The MIKROFILL MAXI AP 180 RH is a high-capacity, floor-standing pressurisation unit for large domestic, commercial and industrial sites. It maintains stable pressure across sealed LPHW, CHW, refrigeration and industrial cooling systems. This unit is Right Hand entry.

Quick to install and commission, MAXI AP 180 RH uses an advanced microprocessor-controlled platform with Ai100 technology for accurate, efficient management. Choose single or twin-pump configurations with intuitive digital controls and real-time status indication.

• BMS-ready: Modbus RTU plus 4 programmable volt-free relays
• Cold fill options: up to 3.9–8.0 Bar (model dependent)
• Protection: Category 5 backflow with Type AB air gap
• Robust build: powder-coated steel casing with adjustable feet

Self-diagnostics and leak detection (frequency-of-starts alarm) support long-term reliability, while enhanced models integrate seamlessly with Building Management Systems.

The Mikrofill MAXI PLUS AP 240 Pressurisation Dual Pump unit is a high-capacity, floor-standing pressurisation unit for large domestic, commercial and industrial sites. It maintains stable pressure across sealed heating, chilled water, refrigeration and industrial cooling systems. This is a Right Hand entry unit.

Compact to install and quick to commission, MAXI AP uses an advanced microprocessor-controlled platform with Ai100 technology for accurate, efficient management. Choose single or twin-pump configurations with intuitive digital controls and real-time status.

• BMS-ready: Modbus RTU plus 4 programmable volt-free relays
• Precise control: stable, accurate pressure regulation
• Cold fill options: up to 3.9–8.0 Bar (model dependent)
• Category 5 backflow protection with Type AB air gap

A robust, powder-coated steel enclosure with adjustable feet and self-diagnostic electronics ensures dependable long-term performance and easy integration with Building Management Systems.

The Mikrofill MAXI AP 280 Pressurisation Unit RH is a high-capacity, floor-standing solution for large domestic, commercial and industrial sites. It maintains stable pressure across sealed LPHW, CHW, refrigeration and industrial cooling systems. This unit is a right hand entry.

Quick to install and commission, MAXI AP 280 uses an advanced microprocessor-controlled platform with Ai100 technology for accurate, efficient management. Choose single or twin-pump configurations with intuitive digital controls and real-time status.

• BMS-ready: Modbus RTU plus 4 programmable volt-free relays
• Cold fill options: up to 3.9“8.0 Bar (model dependent)
• Protection: Category 5 backflow with Type AB air gap
• Robust build: powder-coated steel casing with adjustable feet

Self-diagnostics and leak detection (frequency-of-starts alarm) support long-term reliability, while enhanced models integrate seamlessly with Building Management Systems.