-
LOW-E502200AA
Lowara - ecocirc XLplus D 65-80 F Circulator Pump - Twin Head - 498 Ltr/min- Night setback mode
- Easy to install and start up, no advanced programming necessary
- Clear display and easy setting with touch buttons
- For hot and cold media including tap hot water, geothermal and solar systems
- Communicate with Modbus RTU and BACnet systems
- Can be controlled from a laptop, tablet or smartphone via WiFi
The Lowara ecocirc XLplus D 65-80 F Circulator Pump - Twin Head is a Circulator Pump item. This product is manufactured by Lowara. It has an actual flow rate of 498 Ltr/min. The maximum head for this pump is 8m.
The Lowara ecocirc XL and XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls.
The ecocirc XL and XLplus are everything you need in a large wet rotor circulator and nothing you don’t.
The purposefully engineered, easy-to-install ecocirc XL and XLplus are developed with simplicity and efficiency in mind.
£6,321.60 RRP £3,603.31 £3,002.76
In stock
Free Standard Delivery
-
LOW-E502170AA
Lowara - ecocirc XLplus D 32-120 F Circulator Pump - Twin Head - 270 Ltr/min- Night setback mode
- Easy to install and start up, no advanced programming necessary
- Clear display and easy setting with touch buttons
- For hot and cold media including tap hot water, geothermal and solar systems
- Communicate with Modbus RTU and BACnet systems
- Can be controlled from a laptop, tablet or smartphone via WiFi
The Lowara ecocirc XLplus D 32-120 F Circulator Pump - Twin Head is a Circulator Pump item. This product is manufactured by Lowara. It has an actual flow rate of 270 Ltr/min. The maximum head for this pump is 12m.
The Lowara ecocirc XL and XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls.
The ecocirc XL and XLplus are everything you need in a large wet rotor circulator and nothing you don’t.
The purposefully engineered, easy-to-install ecocirc XL and XLplus are developed with simplicity and efficiency in mind.
£3,572.40 RRP £2,036.27 £1,696.89
In stock
Free Standard Delivery
-
LOW-E501400AA
Lowara - ecocirc XLplus D 50-80 F Circulator Pump - Twin Head - 438 Ltr/min- Night setback mode
- Easy to install and start up, no advanced programming necessary
- Clear display and easy setting with touch buttons
- For hot and cold media including tap hot water, geothermal and solar systems
- Communicate with Modbus RTU and BACnet systems
- Can be controlled from a laptop, tablet or smartphone via WiFi
The Lowara ecocirc XLplus D 50-80 F Circulator Pump - Twin Head is a Circulator Pump item. This product is manufactured by Lowara. It has an actual flow rate of 438 Ltr/min. The maximum head for this pump is 8m.
The Lowara ecocirc XL and XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls.
The ecocirc XL and XLplus are everything you need in a large wet rotor circulator and nothing you don’t.
The purposefully engineered, easy-to-install ecocirc XL and XLplus are developed with simplicity and efficiency in mind.
£5,002.80 RRP £2,851.60 £2,376.33
In stock
Free Standard Delivery
-
LOW-E501270AA
Lowara - ecocirc XLplus D 40-150 F Circulator Pump - Twin Head - 396 Ltr/min- Night setback mode
- Easy to install and start up, no advanced programming necessary
- Clear display and easy setting with touch buttons
- For hot and cold media including tap hot water, geothermal and solar systems
- Communicate with Modbus RTU and BACnet systems
- Can be controlled from a laptop, tablet or smartphone via WiFi
The Lowara ecocirc XLplus D 40-150 F Circulator Pump - Twin Head is a Circulator Pump item. This product is manufactured by Lowara. It has an actual flow rate of 396 Ltr/min. The maximum head for this pump is 15m.
The Lowara ecocirc XL and XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls.
The ecocirc XL and XLplus are everything you need in a large wet rotor circulator and nothing you don’t.
The purposefully engineered, easy-to-install ecocirc XL and XLplus are developed with simplicity and efficiency in mind.
£5,091.60 RRP £2,902.21 £2,418.51
In stock
Free Standard Delivery
-
LOW-E503580AA
Lowara - ecocirc XLplus D 80-120 F (PN6) Circulator Pump - Twin Head - 990 Ltr/min- Night setback mode
- Easy to install and start up, no advanced programming necessary
- Clear display and easy setting with touch buttons
- For hot and cold media including tap hot water, geothermal and solar systems
- Communicate with Modbus RTU and BACnet systems
- Can be controlled from a laptop, tablet or smartphone via WiFi
The Lowara ecocirc XLplus D 80-120 F (PN6) Circulator Pump - Twin Head is a Circulator Pump item. This product is manufactured by Lowara. It has an actual flow rate of 990 Ltr/min. The maximum head for this pump is 12m.
The Lowara ecocirc XL and XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls.
The ecocirc XL and XLplus are everything you need in a large wet rotor circulator and nothing you don’t.
The purposefully engineered, easy-to-install ecocirc XL and XLplus are developed with simplicity and efficiency in mind.
£7,777.20 RRP £4,433.00 £3,694.17
In stock
Free Standard Delivery
-
LOW-E503570AA
Lowara - ecocirc XLplus D 65-120F Circulator Pump - Twin Head - 240V - 732 Ltr/min- Night setback mode
- Easy to install and start up, no advanced programming necessary
- Clear display and easy setting with touch buttons
- For hot and cold media including tap hot water, geothermal and solar systems
- Communicate with Modbus RTU and BACnet systems
- Can be controlled from a laptop, tablet or smartphone via WiFi
The Lowara ecocirc XLplus D 65-120F Circulator Pump - Twin Head is a Circulator Pump item. This product is manufactured by Lowara. Voltage for this item is 240V. It has an actual flow rate of 732 Ltr/min. The maximum head for this pump is 12m.
The Lowara ecocirc XL and XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls.
The ecocirc XL and XLplus are everything you need in a large wet rotor circulator and nothing you don’t.
The purposefully engineered, easy-to-install ecocirc XL and XLplus are developed with simplicity and efficiency in mind.
£7,098.00 RRP £4,045.86 £3,371.55
In stock
Free Standard Delivery
-
LOW-E503380AA
Lowara - ecocirc XLplus 100-120 F Circulator Pump - Single Head - 240V - 1044 Ltr/min- Night setback mode
- Easy to install and start up, no advanced programming necessary
- Clear display and easy setting with touch buttons
- For hot and cold media including tap hot water, geothermal and solar systems
- Communicate with Modbus RTU and BACnet systems
- Can be controlled from a laptop, tablet or smartphone via WiFi
The Lowara ecocirc XLplus 100-120 F Circulator Pump - Single Head is a Circulator Pump item. This product is manufactured by Lowara. Voltage for this item is 240V. It has an actual flow rate of 1044 Ltr/min. The maximum head for this pump is 12m.
The Lowara ecocirc XL and XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls.
The ecocirc XL and XLplus are everything you need in a large wet rotor circulator and nothing you don’t.
The purposefully engineered, easy-to-install ecocirc XL and XLplus are developed with simplicity and efficiency in mind.
£4,921.20 RRP £2,805.08 £2,337.57
In stock
Free Standard Delivery
-
MAG1C-99221223
Grundfos - MAGNA1 25-40N Variable Speed Circulator Pump - 180mm - 230V1 1/2" threaded, single-head, high efficiency, variable speed, light commercial circulator pump
£1,285.20 RRP £745.42 £621.18
In stock
Free Standard Delivery
-
97924267
Grundfos - Magna3 40-60F Variable Speed Circulator - 240V - Cast IronMAGNA3 40-60 F
The Grundfos MAGNA3 circulator Pump is the ideal choice for almost any building project – old or new. With its unrivalled energy performance, all-encompassing range and built-in communication capabilities, MAGNA3 is ideal for engineers and specifiers looking to create elevated-output heating and cooling installations. The Pump is maintenance-free due to the canned-rotor type design. This also means that Pump and motor form an integral device without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the Pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to next‑gen reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The Pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Management features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on installation components. MAGNA3 is the superior choice for a wide range of heating and cooling applications,
- Suitable for Commercial heating,
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: -10 .. 110 °C.
- Approvals include CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO
£1,668.00 RRP £967.44 £806.20
In stock
Free Standard Delivery
-
97924244
Grundfos - Magna3 25-40 Circulator Pump - 230V - Single Phase - Cast IronMAGNA3 25-40
The Grundfos MAGNA3 circulator pump is the well-suited choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is well-suited for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to enhanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 is the superior choice for a wide range of heating and cooling applications, including:
MAGNA3 is a single-phase pump characterised by the controller and control display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of Stainless Steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.- small chiller applications
- ground-source heat pump systems
- air conditioning surfaces
- heating surfaces
- mixing loops
Suitable for: Commercial heating
£906.00 RRP £525.48 £437.90
In stock
Free Standard Delivery
-
97924344
Grundfos - Magna3 32-100N Variable Speed Circulator - 240V - Stainless SteelMAGNA3 32-100 N
The Grundfos MAGNA3 circulator pump is the well-suited choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is well-suited for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to enhanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 is the superior choice for a wide range of heating and cooling applications, including:
MAGNA3 is a single-phase pump characterised by the controller and control display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of Stainless Steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.- small chiller applications
- ground-source heat pump systems
- air conditioning surfaces
- heating surfaces
- mixing loops
Suitable for: Domestic hot water recirculation
£2,295.60 RRP £1,331.45 £1,109.54
In stock
Free Standard Delivery
-
97924248
Grundfos - Magna3 25-120 Variable Speed Circulator - 240V - Cast IronMAGNA3 25-120
The Grundfos MAGNA3 circulator pump is the well-suited choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is well-suited for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to enhanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 is the superior choice for a wide range of heating and cooling applications, including:
MAGNA3 is a single-phase pump characterised by the controller and control display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of Stainless Steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.- small chiller applications
- ground-source heat pump systems
- air conditioning surfaces
- heating surfaces
- mixing loops
Suitable for: Commercial heating
£1,519.20 RRP £881.14 £734.28
In stock
Free Standard Delivery
-
LOW-E501340AA
Lowara - Ecocirc XL Plus 40-100F 220 Circulator Pump - Single Head - 378 Ltr/min- Night setback mode
- Easy to install and start up, no advanced programming necessary
- Clear display and easy setting with touch buttons
- For hot and cold media including tap hot water, geothermal and solar systems
- Communicate with Modbus RTU and BACnet systems
- Can be controlled from a laptop, tablet or smartphone via WiFi
The Lowara Ecocirc XL Plus 40-100F 220 Circulator Pump - Single Head is a Circulator Pump item. This product is manufactured by Lowara. It has an actual flow rate of 378 Ltr/min. The maximum head for this pump is 10m.
The Lowara ecocirc XL and XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls.
The ecocirc XL and XLplus are everything you need in a large wet rotor circulator and nothing you don’t.
The purposefully engineered, easy-to-install ecocirc XL and XLplus are developed with simplicity and efficiency in mind.
£1,905.60 RRP £1,086.19 £905.16
In stock
Free Standard Delivery
-
IMP-979524528
IMP - NMT SAN SMART 25/60-180 Circulator Pump - OBSOLETE - 230VPermissible mediums Water, mixed with glycol, parameters must be checked in the mixture of water with over 20% of glycol. This product is manufactured by IMP. Pure, non-explosive liquid media free of mineral oils and solid particles. Medium temperature from – 10 °C to + 110 °C, ambient temperature with max. surroundings temperature 40 °C.
Electronically controlled high-efficiency pumps for heating, air conditioning, cooling and sanitary water.
The NMT (new motor technology) circulating pumps are used for the transfer of liquid medium within systems for hot-water heating, air-conditioning and ventilation.
They are developed as single or twin variable-speed pumping aggregates where the speed is regulated by electronic device.
The pump constantly measures pressure and flow and adjusts the speed according to the set pump mode.
Electronically controlled wet running circulating pump: For all heating systems, air conditioning, closed cooling circuits and industrial systems, used in accordance with VDI 2035.
The IMP NMT SAN SMART 25/60-180 Circulator Pump - Obsolete is a Circulator Pump item. Voltage for this item is 230V.
Out Of Stock
Free Standard Delivery
-
IMP-979524533
IMP - NMT SAN SMART C 25/60-180 Circulator Pump - OBSOLETE - 230VPermissible mediums Water, mixed with glycol, parameters must be checked in the mixture of water with over 20% of glycol. This product is manufactured by IMP. Pure, non-explosive liquid media free of mineral oils and solid particles. Medium temperature from – 10 °C to + 110 °C, ambient temperature with max. surroundings temperature 40 °C.
Electronically controlled high-efficiency pumps for heating, air conditioning, cooling and sanitary water.
The NMT (new motor technology) circulating pumps are used for the transfer of liquid medium within systems for hot-water heating, air-conditioning and ventilation.
They are developed as single or twin variable-speed pumping aggregates where the speed is regulated by electronic device.
The pump constantly measures pressure and flow and adjusts the speed according to the set pump mode.
Electronically controlled wet running circulating pump: For all heating systems, air conditioning, closed cooling circuits and industrial systems, used in accordance with VDI 2035.
The IMP NMT SAN SMART C 25/60-180 Circulator Pump - Obsolete is a Circulator Pump item. Voltage for this item is 230V.
Out Of Stock
Free Standard Delivery
-
IMP-979524769
IMP - NMTD 65-80F Circulator Pump - Twin - 230VNMTD MAX – remote on/off, status relay feedback
NMTD MAX C – upgrade with NMTC communication module (option): Ethernet, Modbus RTU, analog control input 0-10V, 3 analog inputs/outputs, 1 rele output.Electronically controlled high-efficiency pumps for heating, air conditioning, cooling and sanitary water.
The NMT (new motor technology) circulating pumps are used for the transfer of liquid medium within systems
for hot-water heating, air-conditioning and ventilation.They are developed as single or twin variable-speed pumping aggregates where the speed is regulated by electronic device.
The pump constantly measures pressure
and flow and adjusts the speed according to the set pump mode.Electronically controlled wet running circulating pump: For all heating systems, air conditioning, closed cooling circuits and industrial systems, used in accordance with VDI 2035.
Permissible mediums Water, mixed with glycol, parameters must be checked in the mixture of water with over 20% of glycol. This product is manufactured by IMP. Pure, non-explosive liquid media free of mineral oils and solid particles. Medium temperature from – 10 °C to + 110 °C, ambient temperature with max. surroundings temperature 40 °C.
The IMP NMTD 65-80F Circulator Pump - Twin is a Circulator Pump item. Voltage for this item is 230V.
£2,006.40 £1,672.00
In stock
Free Standard Delivery
Circulating Pumps
Circulating pumps move slurries, liquids, and gases through a closed system, keeping heating, cooling, and hot water circuits flowing as they should. They are most commonly used in domestic and commercial heating systems to maintain a steady supply of hot water, but they also play a key role in underfloor heating, radiator circuits, and chilled water applications.
By keeping water moving continuously, circulating pumps help balance temperatures, reduce energy waste, and ensure that taps, showers, and heating systems respond instantly when needed. Hot water circulating pumps are particularly useful in larger properties or commercial setups, where waiting for water to heat can lead to unnecessary water and energy use.
At Pumpify, our range includes circulating pumps suitable for everything from simple domestic setups to more complex commercial systems. Designed for easy installation, straightforward maintenance, and long-term performance, these pumps ensure your heating and hot water systems operate smoothly, reliably, and cost-effectively.