Stuart Turner

Centrifugal Horizontal Unit Single Stage

The CH single stage range of centrifugal pumps is intended for liquid transfer, pressure boosting or distribution of clean, fresh water. Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Centrifugal Horizontal Unit Single Stage

Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application, as it does not rely on gravity flow to activate. The CH 12-14 B is suitable for commercial or domestic use, pumping hot or cold water and supplied with G1 flexible hoses.

Typical Twin Unit

Monsoon Typical 1.5 bar. Twin Shower Unit. Designed for installation into vented systems to pump both hot & cold water supplies, boosting both equally to an individual shower, complete bathroom, or whole house. Suitable for positive head applications only.

Centrifugal Horizontal Unit multi-stage

The CH 4-60 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-60 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 62 metres.

Centrifugal Horizontal Unit multi-stage

STUART CH4-60 FL pumps are optimal for water pressurisation to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. CH Automatic Flow Switch pumps require a gravity flow of 1 litre/minute to operate and are suitable for commercial or domestic use, pumping hot or cold water at flow rates up to 148 litres per minute and heads up to 62 metres.

Unit Management Module

The Management Module remotely switches pumps without controls and can be utilised in both positive and negative head plumbing systems.
The pump incorporates a pressure switch to start a connected pump and a flow switch to stop the pump, ensuring a continuous supply of boosted water to all outlets without hunting. Incorporating pump run dry protection, the control module features a simple LED display for power on, pump running and fault indication.
The pump is supplied with a 70 mm long extension piece allowing the module to clear the pump terminal box.

The Stuart Turner SPU 135 Midi Pressurisation Unit is perfect for domestic use.

Quick and simple installation. Housed in a compact and robust housing for easy wall mounting. This pump can also be floor mounted.

For ease of installation the midi range comes with a configurable option for the flexible hose outlet connection of either left or right handed.

Comes with category 5 backflow protection, Type AB air gap , weir overflow and warning pipe.

ISO 9001:2015

BS EN 60335 compliant

CE compliant

WRAS Compliant.

Comes complete with 2 years warranty.

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 22.5 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 33.5 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 44 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 54.5 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 66.5 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 77 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 89 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 99.5 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems