Stuart Turner

Centrifugal Horizontal Unit Single Stage

The CH single stage range of centrifugal pumps is intended for liquid transfer, pressure boosting or distribution of clean, fresh water. Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Showermate Standard Twin pumps are designed for installation into vented systems to equally boost both the hot and cold water supplies to the bathroom or a single shower. They require a gravity flow of more than 0.8 litres per minute through the outlet to start and are suitable for positive head applications.

Features:

• 3 year guarantee 
• 1.8 and 2.6 bar. options 
• Suitable for positive head applications 
• High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves 
• Quiet operation 
• WRAS approved product 
• Continuously rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Showermate ECO Standard Single pumps are engineered to improve water supplies to single taps or to pump blended water from a shower mixer. Suitable for positive head applications only.

Suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted.

Features:

• 3 year guarantee 
• 2.0 bar. option 
• Suitable for positive head applications 
• High quality compact plastic pump supplied with 15 mm flexible hoses with integral ISO valves on inlets 
• Quiet operation 
• WRAS approved product 
• Intermittently rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Universal Twin

Showermate Universal 2.0 bar. Twin shower pumps can be utilised to pump the hot and cold liquid supplies to a shower or bathroom as required.
High quality, high performance compact pump supplied with four 15 mm anti-vibration flexible hoses.
All Showermate Universal pumps are suitable for use in open vented (gravity fed) systems for both positive & negative head applications.

Applications

• Low pressure gravity systems - boosting hot or cold water supplies to a single shower or to up to four outlets within a bathroom
• Showermate Universal pumps are suitable for use where there is less than 1 litre/min gravity flow from the outlet(s) to be boosted

Typical Twin Unit

Monsoon Typical 2.0 bar. Twin Shower Unit. Designed for installation into vented systems to pump both hot & cold water supplies, boosting both equally to an individual shower, complete bathroom, or whole house. Suitable for positive head applications only.

Universal Twin

Monsoon Universal 2.0 bar. Twin Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Typical Single Unit

MONSOON Typical 2.0 bar Single Unit. can be utilised in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All MONSOON Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications where the existing flow due to gravity is more than 1 litre/min.

Applications

• Boosting hot or cold water supplies to a single tap or the blended water between a shower valve and shower head in low pressure gravity systems
• MONSOON Standard pumps are suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted

Universal Single

Monsoon Universal 2.0 bar. Single Shower Unit. can be utilised in pairs to boost vented setups to pump hot and cold water supplies independently, or as a single pump to boost a water supply as required. Suitable for both positive and negative head applications.

Centrifugal Horizontal Unit multi-stage

The CH 4-60 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-60 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 62 metres.

Centrifugal Horizontal Unit multi-stage

STUART CH4-60 FL pumps are optimal for water pressurisation to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. CH Automatic Flow Switch pumps require a gravity flow of 1 litre/minute to operate and are suitable for commercial or domestic use, pumping hot or cold water at flow rates up to 148 litres per minute and heads up to 62 metres.

Spare Part

Stuart Electrastream circulation pump.

Buy the Stuart Turner 15/60 (130) Circulator from Pumpify and receive free standard delivery.

Household Circulator

The Stuart ST 25/80 circulator features the latest in elevated efficiency technology offering an EEI rating of just 0.20 and proportional pressurisation control.
For use in new systems or as a replacement pump, this Cast Iron circulator is suitable for domestic heating systems.

This product is an ideal replacement for:

• Grundfos: UPS2 25-80
• Wilo: Yonos Pico 25/1/8
• Dab: Evotron 80/180
• Grundfos: UPS 25/55

Order the Stuart Turner ST 15/60 B (130) Circulator from Pumpify and receive free standard delivery.

The Stuart ST 15/60 B circulator features the latest in high efficiency technology offering an EEI rating of just 0.18 and proportional pressure control.

Key Product Features:

This product is an alternative product for:

• Grundfos: UPS 15/50N
• Dab: VS 65/150B
• CPL: SE60B
• Wilo: SB30

Mains Boost Unit

Where vertical space is not an issue the Mainsboost vessel mounted Charger pump may be the answer. Mainsboost vessel mounted Charger pumps offers the same performance benefits as the wall mounted variant and can be utilised in conjunction with Mainsboost Steel vessels.

In-Tank Booster Setup

The Aquaboost range of automatic variable speed 'In-Tank' booster setups offers a space-saving, very quiet and simple to install solution for a range of domestic and commercial applications.
Available with 250 - 2000 litre cold water storage capacity, with flow rates up to 16 m³/h and heads up to 8 bar..

Offers variable speed pump technology to maintain constant pressure and flow when multiple outlets are operational.
The Aquaboost ABF V200-80 Framed Booster Set offers 200 litres of water and up to 80 litres per minute.