Stuart Turner

Showermate Standard Twin pumps are designed for installation into vented systems to equally boost both the hot and cold water supplies to the bathroom or a single shower. They require a gravity flow of more than 0.8 litres per minute through the outlet to start and are suitable for positive head applications.

Features:

• 3 year guarantee 
• 1.8 and 2.6 bar. options 
• Suitable for positive head applications 
• High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves 
• Quiet operation 
• WRAS approved product 
• Continuously rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Showermate ECO Standard Single pumps are engineered to improve water supplies to single taps or to pump blended water from a shower mixer. Suitable for positive head applications only.

Suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted.

Features:

• 3 year guarantee 
• 2.0 bar. option 
• Suitable for positive head applications 
• High quality compact plastic pump supplied with 15 mm flexible hoses with integral ISO valves on inlets 
• Quiet operation 
• WRAS approved product 
• Intermittently rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Universal Twin

Showermate Universal 2.0 bar. Twin shower pumps can be utilised to pump the hot and cold liquid supplies to a shower or bathroom as required.
High quality, high performance compact pump supplied with four 15 mm anti-vibration flexible hoses.
All Showermate Universal pumps are suitable for use in open vented (gravity fed) systems for both positive & negative head applications.

Applications

• Low pressure gravity systems - boosting hot or cold water supplies to a single shower or to up to four outlets within a bathroom
• Showermate Universal pumps are suitable for use where there is less than 1 litre/min gravity flow from the outlet(s) to be boosted

Typical Twin Unit

Monsoon Typical 2.0 bar. Twin Shower Unit. Designed for installation into vented systems to pump both hot & cold water supplies, boosting both equally to an individual shower, complete bathroom, or whole house. Suitable for positive head applications only.

Universal Twin

Monsoon Universal 2.0 bar. Twin Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Typical Single Unit

MONSOON Typical 2.0 bar Single Unit. can be utilised in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All MONSOON Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications where the existing flow due to gravity is more than 1 litre/min.

Applications

• Boosting hot or cold water supplies to a single tap or the blended water between a shower valve and shower head in low pressure gravity systems
• MONSOON Standard pumps are suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted

Universal Single

Monsoon Universal 2.0 bar. Single Shower Unit. can be utilised in pairs to boost vented setups to pump hot and cold water supplies independently, or as a single pump to boost a water supply as required. Suitable for both positive and negative head applications.

The Aquaboost Horizontal Booster Set offers variable speed twin pump pumps capable of boosting cold water at up to 30 m3/h or up to 9.2 bar. pressure in light commercial applications.

Aquaboost Booster Sets can be configured for duty-assist or duty-standby modes

Key Product Features:

• Variable speed pump control
• Duty-assist and duty-standby modes
• WRAS approved materials
• Continuously rated operation
• Stainless Steel manifold assmebly
• Anti-vibration mounting feet
• 24 litre pressure vessel included

The Aquaboost Horizontal Booster Set offers variable speed twin pump pumps capable of boosting cold water at up to 30 m3/h or up to 9.2 bar. pressure in light commercial applications.

Aquaboost Booster Sets can be configured for duty-assist or duty-standby modes.

Key Product Features:

• Variable speed pump control
• Duty-assist and duty-standby modes
• WRAS approved materials
• Continuously rated operation
• Stainless Steel manifold assembly
• Anti-vibration mounting feet
• 24 litre pressure vessel included

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 22.5 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 33.5 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 44 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 54.5 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 66.5 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 77 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems

A vertical multi-stage pump featuring a compact, close-coupled design and heavy-duty oversized motor shaft.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 4.5m³/h and models available providing up to 89 metres head, these pumps are suitable for use in a wide range of water boosting applications.

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning systems