Stuart Turner

Centrifugal Horizontal Unit Single Stage The CH single stage range of centrifugal pumps is intended for liquid transfer, pressure boosting or distribution of clean, fresh water. Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Typical Single Unit SHOWERMATE Typical 2.6 Bar. Single Unit. Can be used in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required. High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.

Universal Twin pumps are designed for installation into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications. They offer a high quality option for boosting water in a complete bathroom or to an individual shower. _x000D_ Suitable for use where there is less than 1 litre/min flow from the outlet(s) to be boosted.

Universal Single Showermate Universal 2.6 Bar. Single shower pumps can be used in pairs to pump hot and cold liquid supplies independently, or as a single pump to boost the hot or cold water supply as required. High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses. All Showermate Universal pumps are suitable for use in open vented (gravity fed) systems for both positive & negative head applications.

Universal Twin Monsoon Universal 4.5 Bar. Twin Shower Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Universal Single Monsoon Universal 4.5 Bar. Single Shower Unit. Can be used in pairs to boost vented setups to pump hot and cold water supplies independently, or as a single pump to boost a water supply as required. Suitable for both positive and negative head applications.

Typical Twin Unit Monsoon Typical 4.5 Bar. Twin Shower Unit. Designed for installation into vented systems to pump both hot & cold water supplies, boosting both equally to an individual shower, complete bathroom, or whole house. Suitable for positive head applications only.

Typical Single Unit MONSOON Typical 4.5 bar Single Unit. Can be used in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required. High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.

Mains Boost Setup Product Discontinued - replaced by the new STORMBOOST 80 FLOMATE MBF-80 can be connected directly to the incoming mains and will deliver up to 16 litres/minute throughput at 3.2 Bar. pressurisation to multiple outlets within the property, up to the preset cut-in limit of the 60 litre pressure vessel, at which time the system will deliver 12 litres/minute until demand ends and the pressure vessel recharges.

Centrifugal Horizontal Unit multi-stage The STUART CH4-30 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-30 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 140 litres per minute and heads up to 25 metres.

Centrifugal Horizontal Unit multi-stage The CH 4-60 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-60 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 62 metres.

Centrifugal Horizontal Unit multi-stage STUART CH4-60 FL pumps are optimal for water pressurisation to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. CH Automatic Flow Switch pumps require a gravity flow of 1 litre/minute to operate and are suitable for commercial or domestic use, pumping hot or cold water at flow rates up to 148 litres per minute and heads up to 62 metres.

Integrated Booster Setup Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution. These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure. The iBOOST F200 features simple to operate fixed speed controls and is capable of generating pressures of up to 4.5 Bar.

Spare Part Stuart Electrastream circulation pump. Key Product Features Genuine Stuart Electrastream part supplied by Stuart Turner Compatible with original Stuart Electrastream products based on Ariston Aquabravo or Fabdec hot liquid cylinders

Household Circulator The Stuart ST 25/80 circulator features the latest in elevated efficiency technology offering an EEI rating of just 0.20 and proportional pressurisation control. For use in new systems or as a replacement pump, this cast iron circulator is suitable for domestic heating systems.

Buy the Stuart Turner ST 15/60 B (130) Circulator from Pump Sales Direct and receive free standard delivery. _x000D_ The Stuart ST 15/60 B circulator features the latest in high efficiency technology offering an EEI rating of just 0.18 and proportional pressure control.