Stuart Turner

Universal Twin

Monsoon Universal 4.0 bar. Twin Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Universal Twin

Monsoon Universal 4.5 bar. Twin Shower Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Universal Single

Monsoon Universal 4.5 bar. Single Shower Unit. can be utilised in pairs to boost vented setups to pump hot and cold water supplies independently, or as a single pump to boost a water supply as required. Suitable for both positive and negative head applications.

Typical Twin Unit

Monsoon Typical 4.5 bar. Twin Shower Unit. Designed for installation into vented systems to pump both hot & cold water supplies, boosting both equally to an individual shower, complete bathroom, or whole house. Suitable for positive head applications only.

Typical Single Unit

MONSOON Typical 4.5 bar Single Unit. can be utilised in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All MONSOON Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications where the existing flow due to gravity is more than 1 litre/min.

Applications

• Boosting hot or cold water supplies to a single tap or the blended water between a shower valve and shower head in low pressure gravity systems
• MONSOON Standard pumps are suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted

Mains Boost Setup

Product Discontinued - replaced by the new STORMBOOST 80

FLOMATE MBF-80 can be connected directly to the incoming mains and will deliver up to 16 litres/minute throughput at 3.2 bar. pressurisation to multiple outlets within the property, up to the preset cut-in limit of the 60 litre pressure vessel, at which time the system will deliver 12 litres/minute until demand ends and the pressure vessel recharges.

Designed for low occupancy properties with one bathroom and fits neatly within a standard 500 mm kitchen base pump.

Integrated Booster Setup

Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution.
These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure.

The iBOOST F200 features simple to operate fixed speed controls and is capable of generating pressures of up to 4.5 bar. and flow rates of up to 100 litres per minute, typically operating at 60 litres per minute at 3.0 bar. pressure.

Integrated Booster Setup (CAT5)

iBOOST CAT 5 liquid pressurisation and flow boosting systems feature a weir overflow making them suitable for use in commercial applications where the risk of back flow contamination from Category 5 fluids exists.

Mains Boost Unit

Where vertical space is not an issue the Mainsboost vessel mounted Charger pump may be the answer. Mainsboost vessel mounted Charger pumps offers the same performance benefits as the wall mounted variant and can be utilised in conjunction with Mainsboost Steel vessels.

Integrated Booster Setup

Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution.
These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure.

The iBOOST V200 is capable of generating pressures of up to 4.5 bar. and flow rates of up to 100 litres per minute, typically operating at 60 litres per minute at 3.0 bar. pressure.
The V200 offers an advanced variable speed pump control system which enables the pump to supply a constant programmable water pressure as demand on the system fluctuates.

The Stuart Turner SPU 150 Midi Pressurisation Unit is perfect for domestic use.

Quick and simple installation. Housed in a compact and robust housing for easy wall mounting. This pump can also be floor mounted.

For ease of installation the midi range comes with a configurable option for the flexible hose outlet connection of either left or right handed.

Comes with category 5 backflow protection, Type AB air gap , weir overflow and warning pipe.

ISO 9001:2015

BS EN 60335 compliant

CE compliant

WRAS Compliant.

Comes complete with 2 years warranty.

Digital Pressurisation Unit

MID-RANGE POWER WITH PEAK OPERATION

The Mikrofill MIDI is a flexible and high-performance pressurisation pump designed to maintain pressure in large domestic and light commercial sealed systems, including heating systems, chilled water systems, refrigeration pumps, and industrial cooling systems. Featuring continuously rated brass peripheral pumps, the MIDI ensures reliable operation with minimal maintenance.

Thanks to its compact design, the Mikrofill MIDI can be wall or floor mounted, making it exceptionally easy to install and commission. With a cold fill pressure of up to 4.1 bar. and an 8-litre tank capacity, the pump is built to meet the demands of systems up to 150,000 litres.

The advanced digital control system and automated fill and top-up functions guarantee precise pressure management. Its high flow, KIWA-approved fill valve and flexible connection options add to its ease of use and efficiency.

Designed for consistent performance and built for durability, the Mikrofill MIDI is the ideal solution for both heating and cooling applications, providing seamless pressure control with minimal maintenance.