Stuart Turner

Typical Single Unit

SHOWERMATE Typical 2.6 bar. Single Unit. can be utilised in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All Showermate Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications where the existing flow due to gravity is more than 2 litres/min.

Applications

• Boosting hot or cold water supplies to a single tap or the blended water between a shower valve and shower head in low pressure gravity systems
• Showermate Standard pumps are suitable for use where there is already more than 2 litres/min flow from the outlet(s) to be boosted

Universal Twin pumps are designed for installation into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications. They offer a high quality option for boosting water in a complete bathroom or to an individual shower.

Suitable for use where there is less than 1 litre/min flow from the outlet(s) to be boosted.

Features:

• 3 year guarantee 
• 1.8 and 2.6 bar. options 
• Suitable for positive or negative head applications 
• High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves 
• Quiet operation 
• WRAS approved product 
• Continuously rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Universal Single

Showermate Universal 2.6 bar. Single shower pumps can be utilised in pairs to pump hot and cold liquid supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All Showermate Universal pumps are suitable for use in open vented (gravity fed) systems for both positive & negative head applications.

Applications

• Low pressure gravity systems - boosting hot or cold water supplies to a single shower or to up to four outlets within a bathroom
• Showermate Universal pumps are suitable for use where there is less than 1 litre/min gravity flow from the outlet(s) to be boosted

Universal Twin

Monsoon Universal 4.5 bar. Twin Shower Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Universal Single

Monsoon Universal 4.5 bar. Single Shower Unit. can be utilised in pairs to boost vented setups to pump hot and cold water supplies independently, or as a single pump to boost a water supply as required. Suitable for both positive and negative head applications.

Typical Twin Unit

Monsoon Typical 4.5 bar. Twin Shower Unit. Designed for installation into vented systems to pump both hot & cold water supplies, boosting both equally to an individual shower, complete bathroom, or whole house. Suitable for positive head applications only.

Typical Single Unit

MONSOON Typical 4.5 bar Single Unit. can be utilised in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All MONSOON Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications where the existing flow due to gravity is more than 1 litre/min.

Applications

• Boosting hot or cold water supplies to a single tap or the blended water between a shower valve and shower head in low pressure gravity systems
• MONSOON Standard pumps are suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted

Mains Boost Setup

Product Discontinued - replaced by the new STORMBOOST 80

FLOMATE MBF-80 can be connected directly to the incoming mains and will deliver up to 16 litres/minute throughput at 3.2 bar. pressurisation to multiple outlets within the property, up to the preset cut-in limit of the 60 litre pressure vessel, at which time the system will deliver 12 litres/minute until demand ends and the pressure vessel recharges.

Designed for low occupancy properties with one bathroom and fits neatly within a standard 500 mm kitchen base pump.

Centrifugal Horizontal Unit multi-stage

The STUART CH4-30 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-30 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 140 litres per minute and heads up to 25 metres.

Integrated Booster Setup

Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution.
These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure.

The iBOOST F200 features simple to operate fixed speed controls and is capable of generating pressures of up to 4.5 bar. and flow rates of up to 100 litres per minute, typically operating at 60 litres per minute at 3.0 bar. pressure.

Integrated Booster Setup (CAT5)

iBOOST CAT 5 liquid pressurisation and flow boosting systems feature a weir overflow making them suitable for use in commercial applications where the risk of back flow contamination from Category 5 fluids exists.

Integrated Booster Setup

Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution.
These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure.

The iBOOST V200 is capable of generating pressures of up to 4.5 bar. and flow rates of up to 100 litres per minute, typically operating at 60 litres per minute at 3.0 bar. pressure.
The V200 offers an advanced variable speed pump control system which enables the pump to supply a constant programmable water pressure as demand on the system fluctuates.

Vertical multi-stage pumps featuring a compact, robust design and heavy-duty oversized motor bearing.

Pump head construction: AISI 304 Stainless Steel, these robust and durable pumps are available in single phase and three phase options.

Capable of flow rates up to 28 m³/h and models available providing up to 31 metres head, these pumps are suitable for use in a wide range of water boosting applications such as:

• Domestic and commercial water supply
• Industrial systems, plant and processing
• Wash down pumps
• Water distribution
• Irrigation and rainwater recovery
• Temperature control and air conditioning

Universal Twin pumps are designed for installation into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications. They offer a high quality option for boosting water in a complete bathroom or to an individual shower.

Suitable for use where there is less than 1 litre/min flow from the outlet(s) to be boosted.

Features:

• 3 year guarantee 
• 1.8 and 2.6 bar. options 
• Suitable for positive or negative head applications 
• High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves 
• Quiet operation 
• WRAS approved product 
• Continuously rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Typical Twin Unit

Showermate Typical 2.6 bar. Twin shower pumps can be utilised to pump the hot and cold water supplies to a shower or bathroom as required.
High quality, high performance compact pump supplied with four 15 mm anti-vibration flexible hoses.
All Showermate Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications.

Applications

• Low pressure gravity systems - boosting hot or cold water supplies to a single shower or to up to four outlets within a bathroom
• Showermate Standard pumps are suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted