Stuart Turner

Mains Boost Setup Product Discontinued - replaced by the new STORMBOOST 100 FLOMATE MBF-100 is appropriate for household properties with one bathroom. Designed to sit within a typical kitchen 600 mm larder style cupboard it will deliver up to 18 litres/minute flow at 3.2 Bar.

Mains Liquid Boosting Setup The MAINSBOOST MB 450SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. MAINSBOOST vessel systems do not require an electrical supply and operate silently. System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required.

The Mainsboost MB 450SV features a nominal vessel size of 450 litres and a pressurised water holding capacity of approximately 248 litres. _x000D_ Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year guarantee.

The Mainsboost MB 100SV-1-22 features a nominal vessel size of 100 litres and a pressurised water holding capacity of approximately 55 litres. Available in single, twin and triple vessel options, each pump is supplied with the new compact Mainsboost Monobloc 22/28mm Upstream Line-In Kit (ULK) as standard which significantly simplifies installation. Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year warranty.

The Mainsboost MB 100SV-2-22 features a nominal vessel size of 2x100 litres and a pressurised water holding capacity of approximately 2x55 litres. Each system is supplied with the new compact Mainsboost Monobloc 22/28mm Upstream Line-In Kit (ULK) as standard which significantly simplifies installation. Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year warranty.

The Mainsboost MB 100SV-3-22 features a nominal vessel size of 3x100 litres and a pressurised water holding capacity of approximately 3x55 litres. Each system is supplied with the new compact Mainsboost Monobloc 22/28mm Upstream Line-In Kit (ULK) as standard which significantly simplifies installation. Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year warranty.

The 2 vessel Mainsboost 450 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 450 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The Mainsboost 450 litre vertical steel vessel with 28 mm connections is installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property and where required can be supplied with multiple vessels options.

The 3 vessel Mainsboost 450 litre vertical steel system with 28 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Mains Liquid Boosting Setup MAINSBOOST Composite offers all the operation benefits of the standard MAINSBOOST range, housed in a vessel which is 30% lighter than the standard MAINSBOOST steel vessel. Their lightweight composite body makes them easy to manoeuvre and install in places with difficult access. The unique construction of the MAINSBOOST Composite vessel ensures exceptional standards of water hygiene and makes them the preferred choice for health care facilities.

The 2 vessel Mainsboost 100 litre vertical composite system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 100 litre vertical composite system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Mains Liquid Boosting Setup The Mainsboost 450 litre vertical composite vessel with 22 mm connections is installed directly onto the incoming liquid supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property and where required can be supplied with multiple vessels options.

The 2 vessel Mainsboost 450 litre vertical composite system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 450 litre vertical composite system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.