Stuart Turner

Designed to sit within a typical kitchen 600 mm wide larder style cupboard or other home applications. It will deliver up to 22 litres/min flow at up to 3.2 Bar. pressure for up to 11 minutes after which time it will deliver up to 12 litres/minute continuously until demand ends and the pressure vessel recharges*. _x000D_ _x000D_ * The actual flow rate may less less than this and is dependent on the mains supply flow available.

Mains Liquid Boosting Setup The MAINSBOOST MB 450SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. MAINSBOOST vessel systems do not require an electrical supply and operate silently. System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required.

The Mainsboost MB 450SV features a nominal vessel size of 450 litres and a pressurised water holding capacity of approximately 248 litres. _x000D_ Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year guarantee.

Mains Liquid Boosting Setup The MAINSBOOST MB 200SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. MAINSBOOST vessel systems do not require an electrical supply and operate silently. System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required.

The 2 vessel Mainsboost 200 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 200 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 2 vessel Mainsboost 450 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 450 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The Mainsboost 450 litre vertical steel vessel with 28 mm connections is installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property and where required can be supplied with multiple vessels options.

The 3 vessel Mainsboost 450 litre vertical steel system with 28 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Mains Liquid Boosting Setup The MAINSBOOST MB 200SH-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. Supplied with a mounting cradle, these vessel systems are installed horizontally and are ideal for use under the eaves in loft spaces. MAINSBOOST vessel systems do not require an electrical supply and operate silently.

Where height restrictions apply, the 2 vessel Mainsboost 200 litre horizontal steel system with 22 mm connections is ideal. Designed to installed directly onto the incoming water supply and under mains pressure fill with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Where height restrictions apply, the 3 vessel Mainsboost 200 litre horizontal steel system with 22 mm connections is ideal. Designed to installed directly onto the incoming water supply and under mains pressure fill with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Mains Liquid Boosting Setup The Mainsboost 200 litre vertical composite vessel with 22 mm connections is installed directly onto the incoming liquid supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property and where required can be supplied with multiple vessels options.

The 2 vessel Mainsboost 200 litre composite steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 200 litre vertical composite system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.