Stuart Turner

Designed to sit within a typical kitchen 600 mm wide larder style cupboard or other home applications. It will deliver up to 22 litres/min flow at up to 3.2 Bar. pressure for up to 11 minutes after which time it will deliver up to 12 litres/minute continuously until demand ends and the pressure vessel recharges*. _x000D_ _x000D_ * The actual flow rate may less less than this and is dependent on the mains supply flow available.

The Stuart Turner SPU 135 Midi Pressurisation Unit is perfect for domestic use. _x000D_ Quick and simple installation. Housed in a compact and robust housing for easy wall mounting. This pump can also be floor mounted.

The Stuart Turner SPU 150 Midi Pressurisation Unit is perfect for domestic use. _x000D_ Quick and simple installation. Housed in a compact and robust housing for easy wall mounting. This pump can also be floor mounted.

The Stuart Turner SPU 235 Midi Pressurisation Unit is perfect for domestic use. _x000D_ Quick and simple installation. Housed in a compact and robust housing for easy wall mounting. This pump can also be floor mounted.

Digital Pressurisation Unit MID-RANGE POWER WITH PEAK OPERATION The Mikrofill MIDI is a flexible and high-performance pressurisation pump designed to maintain pressure in large domestic and light commercial sealed systems, including heating systems, chilled water systems, refrigeration pumps, and industrial cooling systems. Featuring continuously rated brass peripheral pumps, the MIDI ensures reliable operation with minimal maintenance. Thanks to its compact design, the Mikrofill MIDI can be wall or floor mounted, making it exceptionally easy to install and commission.

Mains Liquid Boosting Setup The MAINSBOOST MB 200SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. MAINSBOOST vessel systems do not require an electrical supply and operate silently. System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required.

The 2 vessel Mainsboost 200 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 200 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Mains Liquid Boosting Setup The MAINSBOOST MB 200SH-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. Supplied with a mounting cradle, these vessel systems are installed horizontally and are ideal for use under the eaves in loft spaces. MAINSBOOST vessel systems do not require an electrical supply and operate silently.

Where height restrictions apply, the 2 vessel Mainsboost 200 litre horizontal steel system with 22 mm connections is ideal. Designed to installed directly onto the incoming water supply and under mains pressure fill with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Where height restrictions apply, the 3 vessel Mainsboost 200 litre horizontal steel system with 22 mm connections is ideal. Designed to installed directly onto the incoming water supply and under mains pressure fill with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Mains Liquid Boosting Setup The Mainsboost 200 litre vertical composite vessel with 22 mm connections is installed directly onto the incoming liquid supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property and where required can be supplied with multiple vessels options.

The 2 vessel Mainsboost 200 litre composite steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 200 litre vertical composite system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Integrated Booster Setup (CAT5) iBOOST CAT 5 liquid pressurisation and flow boosting systems feature a weir overflow making them suitable for use in commercial applications where the risk of back flow contamination from Category 5 fluids exists. Key Product Features 3 year warranty Compact, space saving design, fits within a 600mm cupboard Boosts cold water mains supply to 4.5 Bar.

Extension Tank For even greater capacity, the iBOOST +200 liquid storage tank, featuring a elevated throughput fill valve effectively doubles the capacity of an iBOOST F200 or V200 pump from 200 litres to 400 litres. Installation is simple; the kit supplied will allow you to connect the tank to the main iBOOST pump.