Stuart Turner

The Stuart Turner SPU 130 Mini Pressurisation Unit is perfect for domestic use.

Quick and simple installation. Housed in a compact and robust housing for easy wall mounting.

Comes with category 5 backflow protection, Type AB air gap , weir overflow and warning pipe.

ISO 9001:2015

BS EN 60335 compliant

CE compliant

WRAS Compliant.

Comes complete with 2 years warranty.

The Stuart Turner SPU 230 Mini Pressurisation Unit is perfect for domestic use.

Quick and simple installation. Housed in a compact and robust housing for easy wall mounting.

Comes with category 5 backflow protection, Type AB air gap , weir overflow and warning pipe.

ISO 9001:2015

BS EN 60335 compliant

CE compliant

WRAS Compliant.

Comes complete with 2 years warranty.

The Mainsboost MB 100SV-1-22 features a nominal vessel size of 100 litres and a pressurised water holding capacity of approximately 55 litres.
Available in single, twin and triple vessel options, each pump is supplied with the new compact Mainsboost Monobloc 22/28mm Upstream Line-In Kit (ULK) as standard which significantly simplifies installation.
Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year warranty.

The Mainsboost MB 100SV-2-22 features a nominal vessel size of 2x100 litres and a pressurised water holding capacity of approximately 2x55 litres.
Each system is supplied with the new compact Mainsboost Monobloc 22/28mm Upstream Line-In Kit (ULK) as standard which significantly simplifies installation.
Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year warranty.

The Mainsboost MB 100SV-3-22 features a nominal vessel size of 3x100 litres and a pressurised water holding capacity of approximately 3x55 litres.
Each system is supplied with the new compact Mainsboost Monobloc 22/28mm Upstream Line-In Kit (ULK) as standard which significantly simplifies installation.
Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year warranty.

Mains Liquid Boosting Setup

MAINSBOOST Composite offers all the operation benefits of the standard MAINSBOOST range, housed in a vessel which is 30% lighter than the standard MAINSBOOST steel vessel.
Their lightweight composite body makes them easy to manoeuvre and install in places with difficult access.
The unique construction of the MAINSBOOST Composite vessel ensures exceptional standards of water hygiene and makes them the preferred choice for health care facilities.

The MAINSBOOST MB 100CV is designed for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar. but the flow is insufficient to meet demand.
MAINSBOOST vessel systems do not require an electrical supply and operate silently.

System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required. 
If the incoming mains water pressure is less than 2.5 bar., a MAINSBOOST Charger pump can be utilised in conjunction with the MAINSBOOST vessel system to boost pressure.

The MAINSBOOST MB 100CV features a nominal vessel size of 100 litres and a pressurised cold water water storage capacity of approximately 55 litres.
Each pump is supplied with the unique compact MAINSBOOST Monobloc 22/28mm Upstream Kit (USK) as standard which significantly simplifies installation.

The 2 vessel Mainsboost 100 litre vertical composite system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 100 litre vertical composite system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Unvented Cylinder - Indirect

The Aquastor Sigma range of unvented indirect hot liquid cylinders are optimal for elevated demand applications and offer an all Stainless Steel construction to the highest standards, with a maximum operating pressure of 4.5 bar..
The Sigma range has been designed with higher demand flow rates in mind and features 1 " BSP connections.
Available in a range of cylinder sizes with an ErP B classification.
1 " hot and cold water connections
½" temperature and pressure relief valve
4.5 bar. maximum operating pressure
3 KW immersion heater
22 mm high performance heating coil

The STORMBOOST 100 is the new upgraded and enhanced direct replacement for the original Flomate MBF-100.

STORMBOOST 100 is designed to be connected directly to the incoming cold water mains and activate automatically when a tap is opened or a shower is switched on, boosting mains water pressure and flow throughout the property.

It will deliver up to 17 litres/min flow at up to 3.2 bar. pressure for up to 11 minutes after which time it will deliver up to 12 litres/minute continuously until demand ends and the pressure vessel recharges*.

* The actual flow rate may less less than this and is dependent on the mains supply flow available.

APPLICATIONS

• Boosting mains water pressure to one or two bathroom properties fitted with a combi-boiler
• STORMBOOST 100 fits neatly within a standard 600mm wide kitchen larder pump

Suitable for higher occupancy properties with two bathrooms or more, MBF 100 requires no on-site commissioning and fits neatly within a standard 600 mm kitchen larder pump.

• Boosts mains water pressure up to 3.2 bar.
• Output flow rate up to 17 litres/minute for up to 11 minutes
• 100 litre nominal capacity pressure vessel
• Switches on/off automatically
• Quiet operation
• High quality, robust brass pump body and impeller
• High reliability induction motor
• Integral bypass
• Anti-seize exercise function
• Dry run protection
• Anti-vibration connection hoses included
• WRAS Approved Product
• 3 year warranty with registration and proof of purchase