Stuart Turner

Centrifugal Horizontal Unit Single Stage The CH single stage range of centrifugal pumps is intended for liquid transfer, pressure boosting or distribution of clean, fresh water. Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Submersible Unit Engineered to pump solids up to 5 mm and can be used in either automatic or manual modes. Complete with integral float switch, the Supersub 150VA is ideal for the transference of non foul water and suitable for both clean and grey water. The pump is compact in design and easy to install.

Centrifugal Horizontal Unit Single Stage Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application, as it does not rely on gravity flow to activate. The CH 12-14 B is suitable for commercial or domestic use, pumping hot or cold water and supplied with G1 flexible hoses.

Centrifugal Horizontal Unit Single Stage Optimal for the pressurisation of liquid to outlets in a positive head application where an instant boosted supply is required from a simple to install package. The range is suitable for commercial or domestic use, pumping hot or cold water and supplied with G 1 flexible hoses.

Designed to provide a pressurised water supply from a break tank in either a positive or negative head application. CH multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate. _x000D_ With flow rates up to 160 litres/minute and heads up to 62 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G 1 flexible hoses and adaptors.

Designed to provide a pressurised water supply from a break tank in either a positive or negative head application. CH multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate. _x000D_ With flow rates up to 160 litres/minute and heads up to 62 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G 1 flexible hoses and adaptors.

Centrifugal Horizontal Unit multi-stage Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application. STUART CH4-50 B multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate.

Centrifugal Horizontal Unit multi-stage Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application. STUART CH4-60 B multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate.

Centrifugal Horizontal Unit multi-stage The STUART CH4-30 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-30 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 140 litres per minute and heads up to 25 metres.

Centrifugal Horizontal Unit multi-stage STUART CH 4-30 FL pumps are optimal for water pressurisation to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. CH Automatic Flow Switch pumps require a gravity flow of 1 litre/minute to operate and are suitable for commercial or domestic use, pumping hot or cold water at flow rates up to 134 litres per minute and heads up to 25 metres.

Centrifugal Horizontal Unit multi-stage STUART CH4-40 FL pumps are optimal for water pressurisation to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. CH Automatic Flow Switch pumps require a gravity flow of 1 litre/minute to operate and are suitable for commercial or domestic use, pumping hot or cold water at flow rates up to 141 litres per minute and heads up to 36 metres.

Centrifugal Horizontal Unit multi-stage STUART CH 4-50 FL pumps are optimal for water pressurisation to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. CH Automatic Flow Switch pumps require a gravity flow of 1 litre/minute to operate and are suitable for commercial or domestic use, pumping hot or cold water at flow rates up to 145 litres per minute and heads up to 50 metres.

Centrifugal Horizontal Unit multi-stage STUART CH4-60 FL pumps are optimal for water pressurisation to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. CH Automatic Flow Switch pumps require a gravity flow of 1 litre/minute to operate and are suitable for commercial or domestic use, pumping hot or cold water at flow rates up to 148 litres per minute and heads up to 62 metres.

Submersible Unit The Supervort 140A submersible pump is intended for the transference of dirty water and is capable of handling semi-solids in suspension of up to 20 mm diameter. This pump is compact in design, easy to install and features an external adjustable float switch.

Centrifugal Pressurisation Set Intended to meet setup demands in larger domestic and light commercial applications. The STUART CH4 multi-stage pump is mounted on to a WRAS Approved 24 litre diaphragm tank providing a buffer of pressurised stored water. STUART CH4 Pressure sets are ideally suited to boosting stored cold water supplies to un-vented hot water cylinders/combination boilers. Supplied with G1 flexible hoses and adaptors.

The Aquaboost ABB 0306 2V-SPC/M Vertical Booster Set offers variable speed twin pump pumps capable of boosting cold water at up to 9m³/h or up to 4.4 Bar. pressure in light commercial applications. _x000D_ Aquaboost booster sets can be configured for duty-assist or duty-standby modes. _x000D_ Applications _x000D_ Cold water pressure and flow boosting in a range of domestic, commercial and industrial applications.