Stuart Turner

Mains Liquid Boosting Setup The MAINSBOOST MB 450SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. MAINSBOOST vessel systems do not require an electrical supply and operate silently. System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required.

The Mainsboost MB 450SV features a nominal vessel size of 450 litres and a pressurised water holding capacity of approximately 248 litres. _x000D_ Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year guarantee.

Mains Boost Unit Where vertical space is not an issue the Mainsboost vessel mounted Charger pump may be the answer. Mainsboost vessel mounted Charger pumps offers the same performance benefits as the wall mounted variant and can be used in conjunction with Mainsboost Steel vessels. Key Product Features 5 year warranty Boosts mains water pressure by 3.5 Bar.

The Mainsboost MB 100SV-1-22 features a nominal vessel size of 100 litres and a pressurised water holding capacity of approximately 55 litres. Available in single, twin and triple vessel options, each pump is supplied with the new compact Mainsboost Monobloc 22/28mm Upstream Line-In Kit (ULK) as standard which significantly simplifies installation. Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year warranty.

The Mainsboost MB 100SV-2-22 features a nominal vessel size of 2x100 litres and a pressurised water holding capacity of approximately 2x55 litres. Each system is supplied with the new compact Mainsboost Monobloc 22/28mm Upstream Line-In Kit (ULK) as standard which significantly simplifies installation. Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year warranty.

The Mainsboost MB 100SV-3-22 features a nominal vessel size of 3x100 litres and a pressurised water holding capacity of approximately 3x55 litres. Each system is supplied with the new compact Mainsboost Monobloc 22/28mm Upstream Line-In Kit (ULK) as standard which significantly simplifies installation. Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year warranty.

Mains Liquid Boosting Setup The MAINSBOOST MB 130SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. MAINSBOOST vessel systems do not require an electrical supply and operate silently. System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required.

The 2 vessel Mainsboost 130 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 130 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Mains Liquid Boosting Setup The MAINSBOOST MB 200SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. MAINSBOOST vessel systems do not require an electrical supply and operate silently. System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required.

The 2 vessel Mainsboost 200 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 200 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Mains Liquid Boosting Setup The MAINSBOOST MB 250SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. MAINSBOOST vessel systems do not require an electrical supply and operate silently. System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required.

The 2 vessel Mainsboost 250 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The 3 vessel Mainsboost 250 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

Mains Liquid Boosting Setup The MAINSBOOST MB 300SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 Bar. but the flow is insufficient to meet demand. MAINSBOOST vessel systems do not require an electrical supply and operate silently. System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required.