Stuart Turner

Centrifugal Horizontal Unit Single Stage

The CH single stage range of centrifugal pumps is intended for liquid transfer, pressure boosting or distribution of clean, fresh water. Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Centrifugal Horizontal Unit Single Stage

The CH single stage range of centrifugal pumps is intended for liquid transfer, pressure boosting or distribution of clean, fresh water. Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Submersible Unit

Engineered to pump solids up to 5 mm and can be utilised in either automatic or manual modes. Complete with integral float switch, the Supersub 250VA is ideal for the transference of non foul water and suitable for both clean and grey water.
The pump is compact in design and easy to install.

Universal Twin

Monsoon Universal 3.0 bar. Twin Shower Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Centrifugal Horizontal Unit Single Stage

Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application, as it does not rely on gravity flow to activate. The CH 12-14 B is suitable for commercial or domestic use, pumping hot or cold water and supplied with G1 flexible hoses.

Universal Twin

Monsoon Universal 2.0 bar. Twin Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Typical Single Unit

MONSOON Typical 2.0 bar Single Unit. can be utilised in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All MONSOON Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications where the existing flow due to gravity is more than 1 litre/min.

Applications

• Boosting hot or cold water supplies to a single tap or the blended water between a shower valve and shower head in low pressure gravity systems
• MONSOON Standard pumps are suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted

Universal Single

Monsoon Universal 2.0 bar. Single Shower Unit. can be utilised in pairs to boost vented setups to pump hot and cold water supplies independently, or as a single pump to boost a water supply as required. Suitable for both positive and negative head applications.

Universal Twin

Monsoon Universal 1.5 bar. Twin Shower Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Submersible Unit

Intended to lift clean liquid where high pressure is required and comes with an externally fitted floating switch to protect against running dry. Supplied with a Boostamatic Control Module, located remotely, to provide automatic control.
Diver Boostamatic pumps feature a Stainless Steel motor shell and are compact and easy to install.

Submersible Unit

Intended to lift clean liquid where high pressure is required and comes with an externally fitted floating switch to protect against running dry. Supplied with a Boostamatic Control Module, located remotely, to provide automatic control.
Diver Boostamatic pumps feature a Stainless Steel motor shell and are compact and easy to install.

Peripheral Horizontal Unit

The PH range is particularly appropriate where space is at a premium to pump clean, fresh water. Other clean non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Mains Boost Unit

Product Discontinued - replaced by the new STORMBOOST

Appropriate for reduced occupancy properties with typically one bathroom.
The FLOMATE MBF-12 Pump is designed to be connected directly to the incoming mains and will deliver an additional 1.5 bar. pressure to the existing mains pressure and a maximum flow rate of 12 litres per minute.
The pump will start automatically when a flow rate of 0.6 litres per minute or more exists.

The STORMBOOST 60 is the new upgraded and enhanced direct replacement for the original Flomate MBF60.
STORMBOOST 60 is designed to be connected directly to the incoming cold water mains and activate automatically when a tap is opened or a shower is switched on, boosting mains water pressure and flow throughout the property.

It will deliver up to 16 litres/min flow at up to 3.2 bar. pressure for up to 8 minutes after which time it will deliver up to 12 litres/minute continuously until demand ends and the pressure vessel recharges*.

* The actual flow rate may less less than this and is dependent on the mains supply flow available.

APPLICATIONS

• Boosting mains water pressure to one bathroom properties fitted with a combi-boiler
• STORMBOOST 60 fits neatly within a standard kitchen base pump
• Boosts mains water pressure up to 3.2 bar.
• Output flow rate up to 16 litres/minute for up to 8 minutes
• 60 litre nominal capacity pressure vessel
• Switches on/off automatically
• Quiet operation
• High quality, robust brass pump body and impeller
• High reliability induction motor
• Integral bypass
• Anti-seize exercise function
• Dry run protection
• Anti-vibration connection hoses included
• WRAS Approved Product
• 3 year warranty