Stuart Turner

Peripheral Horizontal Unit

Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application, as it does not rely on gravity flow to activate. The range is suitable for commercial or domestic use, pumping hot or cold water.

Typical Single Unit

SHOWERMATE Typical 2.6 bar. Single Unit. can be utilised in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All Showermate Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications where the existing flow due to gravity is more than 2 litres/min.

Applications

• Boosting hot or cold water supplies to a single tap or the blended water between a shower valve and shower head in low pressure gravity systems
• Showermate Standard pumps are suitable for use where there is already more than 2 litres/min flow from the outlet(s) to be boosted

Universal Twin pumps are designed for installation into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications. They offer a high quality option for boosting water in a complete bathroom or to an individual shower.

Suitable for use where there is less than 1 litre/min flow from the outlet(s) to be boosted.

Features:

• 3 year guarantee 
• 1.8 and 2.6 bar. options 
• Suitable for positive or negative head applications 
• High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves 
• Quiet operation 
• WRAS approved product 
• Continuously rated 
• Anti-vibration feet 
• EPDM/PTFE/Al. Oxide seal 
• Pre-wired with 1.5 metre power cable

Universal Single

Showermate Universal 2.6 bar. Single shower pumps can be utilised in pairs to pump hot and cold liquid supplies independently, or as a single pump to boost the hot or cold water supply as required.
High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.
All Showermate Universal pumps are suitable for use in open vented (gravity fed) systems for both positive & negative head applications.

Applications

• Low pressure gravity systems - boosting hot or cold water supplies to a single shower or to up to four outlets within a bathroom
• Showermate Universal pumps are suitable for use where there is less than 1 litre/min gravity flow from the outlet(s) to be boosted

Peripheral Horizontal Unit

The PH range is particularly appropriate where space is at a premium to pump clean, fresh water. Other clean non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Peripheral Horizontal Unit

The PH range is particularly appropriate where space is at a premium to pump clean, fresh water. Other clean non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Peripheral Horizontal Unit

The range of PH ES peripheral pumps is intended to pump clean, fresh water. Other non aggressive, non explosive liquids with similar characteristics to water may be pumped.
The range can be utilised for pressure boosting, liquid transfer and distribution. They are also suitable for flooded suction applications.

Peripheral Horizontal Unit

The range of PH ES peripheral pumps is intended to pump clean, fresh water. Other non aggressive, non explosive liquids with similar characteristics to water may be pumped.
The range can be utilised for pressure boosting, liquid transfer and distribution. They are also suitable for flooded suction applications.

Peripheral Horizontal Unit

The PH range is particularly appropriate where space is at a premium to pump clean, fresh water. Other clean non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Peripheral Horizontal Unit

The range of PH ES peripheral pumps is intended to pump clean, fresh water. Other non aggressive, non explosive liquids with similar characteristics to water may be pumped.
The range can be utilised for pressure boosting, liquid transfer and distribution. They are also suitable for flooded suction applications.

Peripheral Horizontal Unit

The range of PH ES peripheral pumps is intended to pump clean, fresh water. Other non aggressive, non explosive liquids with similar characteristics to water may be pumped.
The range can be utilised for pressure boosting, liquid transfer and distribution. They are also suitable for flooded suction applications.

Designed to provide a pressurised water supply from a break tank in either a positive or negative head application. CH multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate.

With flow rates up to 160 litres/minute and heads up to 62 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G 1 flexible hoses and adaptors.

The CH 4 B range of pumps are the ideal base pump for pressure boosting sets or for applications where long pipe runs or high heads may be involved

Suitable for domestic or commercial use, pumping hot or cold water

Features:

• Flow rates up to 138 litres per minute and heads up to 64 metres 
• Fully automatic control 
• No pulsing during operation 
• Durable brass and Stainless Steel construction 
• multi-stage centrifugal pump 
• Extended life mechanical seal 
• Quiet operation 
• WRAS Approved Product 
• Continuously rated induction motor 
• Self priming up to 5 metres 
• Dry run protection 
• G 1 Flexible hoses included 
• 2 year guarantee

Centrifugal Horizontal Unit multi-stage

The STUART CH4-30 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-30 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 140 litres per minute and heads up to 25 metres.

Centrifugal Horizontal Unit multi-stage

The STUART CH4-50 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-50 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 50 metres.