Stuart Turner

Single Stage Cast Iron Unit (2HP) The STUART CH3-45 CI Cast Iron pump is a space-saving, high performance pump designed for continuous operation and will deliver flow rates up to 190 litres per minute and heads up to 44 metres. Key Product Features Flow rates up to 190 litres per minute and heads up to 44 metres Standard control Cast iron pump body and Stainless Steel impeller Centrifugal single stage pump Continuously rated 1 year warranty

Peripheral Horizontal Unit The 0.5 HP PH 45 Cast Iron pump is intended for continuous operation at 5 litres/minute and above. This compact, high performance pump delivers flow rates up to 36 litres per minute and heads up to 40 metres.

Peripheral Horizontal Unit The 0.75 HP PH 75 Cast Iron pump is intended for continuous operation at 5 litres/minute and above. This compact, high performance pump delivers flow rates up to 49 litres per minute and heads up to 72 metres.

Peripheral Horizontal Unit The 1.0 HP PH 95 Cast Iron pump is intended for continuous operation at 5 litres/minute and above. This compact, high performance pump delivers flow rates up to 43 litres per minute and heads up to 97 metres.

Submersible Unit Engineered to pump solids up to 5 mm and the transference of non foul water, the Supersub 230A is suitable for use with both clean and grey water. The pump features a Stainless Steel motor shell, is compact in design, easy to install and comes complete with an externally fitted floating switch and stepped hose connector.

The new Mainsboost VariQ offers a variable speed, intelligent, energy efficient and quiet water boosting pump. _x000D_ The Mainsboost VariQ is designed to boost water performance from a cold water storage tank, roof tank or ground tank in domestic and light commercial applications and is ideal for many properties with up to 3 floors and up to 10 outlets in operation simultaneously.

Mains Boost Unit Where mains liquid pressurisation is less than 2.5 bar a Mainsboost Charger pump is the solution. Mainsboost Charger pumps will boost pressure up to 3.5 Bar. when supplied in conjunction with Mainsboost steel or composite vessels and can be located remotely from the Mainsboost vessel without restricting performance. Mainsboost Charger wall mounted pumps are supplied within a noise reducing enclosure.

Mains Boost Unit Where mains liquid pressurisation is less than 2.0 Bar. a Mainsboost Charger pump is the solution. Mainsboost Charger pumps will boost pressure up to 3.5 Bar. when supplied in conjunction with Mainsboost steel or composite vessels and can be located remotely from the Mainsboost vessel without restricting performance.

Universal Twin pumps are designed for installation into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications. They offer a high quality option for boosting water in a complete bathroom or to an individual shower. _x000D_ Suitable for use where there is less than 1 litre/min flow from the outlet(s) to be boosted.

Cat 5 Booster Set The AQUABREAK AB5 Cat 5 booster set is a complete, all-in-one pump, single outlet booster set incorporating single pump, pressurisation sensor, controller, management vessel, non-return valve and a 5 litre (nom) break tank fitted with a 1/2” solenoid valve and strainer. The electronic controller ensures that the pump starts automatically when water is consumed and stops automatically when the consumption ceases. In addition the controller protects the pump in case of faults.

Industrial Circulator - Cast Iron Twin Union Stuart Pulse Cast Iron Circulators are used for the transfer of liquid within setups for hot-water heating, air-conditioning and ventilation. These twin head variable speed circulators are engineered to constantly monitor and regulate pressure and flow and adjust according to the set operating mode.

Typical Twin Unit SHOWERMATE TP Typical 2.0 Bar. Twin Shower Unit. Designed to boost the hot & cold water supply to an individual shower, bath, shower mixer or mixer tap. Suitable for positive head applications only.

Stuart Turner STORMBOOST 2.5 Bar. Mains Water Booster Pump - 47708, your solution to enhancing water pressure in low occupancy properties with ease and durability. Backed by a generous 5-year warranty, this brass pump elevates mains water pressure by up to 2.5 Bar., offering a maximum output flow rate of 12 litres per minute. _x000D_ Crafted with a high-quality brass pump body and impeller, this pump ensures longevity and robust performance.

Typical Twin Unit Showermate Typical 2.6 Bar. Twin shower pumps can be used to pump the hot and cold water supplies to a shower or bathroom as required. High quality, high performance compact pump supplied with four 15 mm anti-vibration flexible hoses. All Showermate Standard pumps are suitable for use in open vented (gravity fed) systems for positive head applications.

Designed to sit within a typical kitchen 600 mm wide larder style cupboard or other home applications. It will deliver up to 27 litres/min flow at up to 3.2 Bar. pressure for up to 11 minutes after which time it will deliver up to 12 litres/minute continuously until demand ends and the pressure vessel recharges*. _x000D_ _x000D_ * The actual flow rate may less less than this and is dependent on the mains supply flow available.

The STORMBOOST 100 is the new upgraded and enhanced direct replacement for the original Flomate MBF-100. _x000D_ STORMBOOST 100 is designed to be connected directly to the incoming cold water mains and activate automatically when a tap is opened or a shower is switched on, boosting mains water pressure and flow throughout the property. _x000D_ It will deliver up to 17 litres/min flow at up to 3.2 Bar.