Stuart Turner

Peripheral Horizontal Unit

The PH range is particularly appropriate where space is at a premium to pump clean, fresh water. Other clean non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Peripheral Horizontal Unit

The range of PH ES peripheral pumps is intended to pump clean, fresh water. Other non aggressive, non explosive liquids with similar characteristics to water may be pumped.
The range can be utilised for pressure boosting, liquid transfer and distribution. They are also suitable for flooded suction applications.

Peripheral Horizontal Unit

The range of PH ES peripheral pumps is intended to pump clean, fresh water. Other non aggressive, non explosive liquids with similar characteristics to water may be pumped.
The range can be utilised for pressure boosting, liquid transfer and distribution. They are also suitable for flooded suction applications.

Peripheral Horizontal Unit

The PH range is particularly appropriate where space is at a premium to pump clean, fresh water. Other clean non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Peripheral Horizontal Unit

The PH range is particularly appropriate where space is at a premium to pump clean, fresh water. Other clean non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Peripheral Horizontal Unit

Optimal for the pressurisation of liquid to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. The range is suitable for commercial and domestic use, pumping hot or cold water.

Peripheral Horizontal Unit

The range of PH ES peripheral pumps is intended to pump clean, fresh water. Other non aggressive, non explosive liquids with similar characteristics to water may be pumped.
The range can be utilised for pressure boosting, liquid transfer and distribution. They are also suitable for flooded suction applications.

Peripheral Horizontal Unit

The range of PH ES peripheral pumps is intended to pump clean, fresh water. Other non aggressive, non explosive liquids with similar characteristics to water may be pumped.
The range can be utilised for pressure boosting, liquid transfer and distribution. They are also suitable for flooded suction applications.

Peripheral Horizontal Unit

Optimal for the pressurisation of liquid to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. The range is suitable for commercial and domestic use, pumping hot or cold water.

Peripheral Horizontal Unit

Optimal for the pressurisation of liquid to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. The range is suitable for commercial and domestic use, pumping hot or cold water.

Peripheral Horizontal Unit

Intended for ongoing use, the Stainless Steel peripheral range is ideal for handling non abrasive liquids and is developed specifically for beer, lager or cider dispensing.
Also used for pumping demineralised water.

Peripheral Horizontal Unit

Intended for ongoing use, the Stainless Steel peripheral range is ideal for handling non abrasive liquids and is developed specifically for beer, lager or cider dispensing.
Also used for pumping demineralised water.

Mains Boost Unit

Product Discontinued - replaced by the new STORMBOOST

Appropriate for reduced occupancy properties with typically one bathroom.
The FLOMATE MBF-12 Pump is designed to be connected directly to the incoming mains and will deliver an additional 1.5 bar. pressure to the existing mains pressure and a maximum flow rate of 12 litres per minute.
The pump will start automatically when a flow rate of 0.6 litres per minute or more exists.

Designed to provide a pressurised water supply from a break tank in either a positive or negative head application. CH multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate.

With flow rates up to 160 litres/minute and heads up to 62 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G 1 flexible hoses and adaptors.

The CH 4 B range of pumps are the ideal base pump for pressure boosting sets or for applications where long pipe runs or high heads may be involved

Suitable for domestic or commercial use, pumping hot or cold water

Features:

• Flow rates up to 138 litres per minute and heads up to 64 metres 
• Fully automatic control 
• No pulsing during operation 
• Durable brass and Stainless Steel construction 
• multi-stage centrifugal pump 
• Extended life mechanical seal 
• Quiet operation 
• WRAS Approved Product 
• Continuously rated induction motor 
• Self priming up to 5 metres 
• Dry run protection 
• G 1 Flexible hoses included 
• 2 year guarantee

Designed to provide a pressurised water supply from a break tank in either a positive or negative head application. CH multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate.

With flow rates up to 160 litres/minute and heads up to 62 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G 1 flexible hoses and adaptors.

The CH 4 B range of pumps are the ideal base pump for pressure boosting sets or for applications where long pipe runs or high heads may be involved

Suitable for domestic or commercial use, pumping hot or cold water

Features:

• Flow rates up to 138 litres per minute and heads up to 64 metres 
• Fully automatic control 
• No pulsing during operation 
• Durable brass and Stainless Steel construction 
• multi-stage centrifugal pump 
• Extended life mechanical seal 
• Quiet operation 
• WRAS Approved Product 
• Continuously rated induction motor 
• Self priming up to 5 metres 
• Dry run protection 
• G 1 Flexible hoses included 
• 2 year guarantee

Centrifugal Horizontal Unit multi-stage

Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application. STUART CH4-50 B multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate. With flow rates up to 135 litres/minute and heads up to 51 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G1 flexible hoses and adaptors.