Stuart Turner

Submersible Unit The Supervort 240A submersible pump is intended for the transference of dirty water and is capable of handling semi-solids in suspension of up to 20 mm diameter. This pump is compact in design, easy to install and features an external adjustable float switch.

Integrated Booster Setup Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution. These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure. The iBOOST F200 features simple to operate fixed speed controls and is capable of generating pressures of up to 4.5 Bar.

Jet Unit Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern, such as water pressurisation and lawn sprinklers. Jet pumps will self prime up to 5 metres and are supplied with a carry handle, a manual on/off switch and power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.

Jet Unit Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern, such as water pressurisation and lawn sprinklers. Jet pumps will self prime up to 5 metres and are supplied with a carry handle, a manual on/off switch and power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.

Jet Unit Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern in either a positive or negative head application. Jet Boostamatic pumps provide fully automatic pressure/flow switch control, will self prime up to 5 metres and are supplied with a power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.

Jet Unit Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern in either a positive or negative head application. Jet Boostamatic pumps provide fully automatic pressure/flow switch control, will self prime up to 5 metres and are supplied with a power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.

_x000D_ 288 litres per hour max flow _x000D_ Up to 5m head _x000D_ Easy access tank _x000D_ 3 inlet ports _x000D_ Twist and click non-return outlet Bar.b _x000D_ Built in spirit level _x000D_ Wall or floor mounted _x000D_ 2m power cable _x000D_ 6m discharge tube _x000D_ High level cut-out switch _x000D_ BS EN 60335 compliant _x000D_

Spare Part Stuart Electrastream circulation pump. Key Product Features Genuine Stuart Electrastream part supplied by Stuart Turner Compatible with original Stuart Electrastream products based on Ariston Aquabravo or Fabdec hot liquid cylinders

Household Circulator The Stuart ST 25/80 circulator features the latest in elevated efficiency technology offering an EEI rating of just 0.20 and proportional pressurisation control. For use in new systems or as a replacement pump, this cast iron circulator is suitable for domestic heating systems.

Buy the Stuart Turner ST 15/60 B (130) Circulator from Pump Sales Direct and receive free standard delivery. _x000D_ The Stuart ST 15/60 B circulator features the latest in high efficiency technology offering an EEI rating of just 0.18 and proportional pressure control.

Centrifugal Pressurisation Set Intended to meet setup demands in larger domestic and light commercial applications. The STUART CH4 multi-stage pump is mounted on to a WRAS Approved 24 litre diaphragm tank providing a buffer of pressurised stored water. STUART CH4 Pressure sets are ideally suited to boosting stored cold water supplies to un-vented hot water cylinders/combination boilers. Supplied with G1 flexible hoses and adaptors.

Integrated Booster Setup (CAT5) iBOOST CAT 5 liquid pressurisation and flow boosting systems feature a weir overflow making them suitable for use in commercial applications where the risk of back flow contamination from Category 5 fluids exists. Key Product Features 3 year warranty Compact, space saving design, fits within a 600mm cupboard Boosts cold water mains supply to 4.5 Bar.

Mains Boost Unit Where vertical space is not an issue the Mainsboost vessel mounted Charger pump may be the answer. Mainsboost vessel mounted Charger pumps offers the same performance benefits as the wall mounted variant and can be used in conjunction with Mainsboost Steel vessels. Key Product Features 5 year warranty Boosts mains water pressure by 3.5 Bar.

Integrated Booster Setup Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution. These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure. The iBOOST V200 is capable of generating pressures of up to 4.5 Bar.

The Stuart Turner SPU 130 Mini Pressurisation Unit is perfect for domestic use. _x000D_ Quick and simple installation. Housed in a compact and robust housing for easy wall mounting. _x000D_ Comes with category 5 backflow protection, Type AB air gap , weir overflow and warning pipe.

The Stuart Turner SPU 230 Mini Pressurisation Unit is perfect for domestic use. _x000D_ Quick and simple installation. Housed in a compact and robust housing for easy wall mounting. _x000D_ Comes with category 5 backflow protection, Type AB air gap , weir overflow and warning pipe.