Trebles

This is a Replacement for the JP5 & JP6 Booster Sets. 24 litre booster package set using a Stuart Turner Jet 80-45 Pump.

Reducing Adaptor - Female – 1³ x ¾ inch. This product is manufactured by Trebles. Image for illustration purposes only.

The Reducing Adaptor - Female – 1³ x ¾ inch is a Spares item.

The PH2D pressurisation unit is a simple, robust and reliable mechanical pressurisation unit that has been designed with over 60 years of experience is highly engineered system equipment.

Throughout a heating system, there is always potential for slight leaks to occur which gradually decrease system pressure leading to inefficient or disabled heating.

Once installed, the PH2D will automatically maintain optimal system pressure by constantly monitoring the system via a pressure transducer. When pressure drops below the entered set point, the unit will top up the system to its original cold fill pressure.

The PH2D has the added benefit of a secondary standby Pump. If one of the Pumps were to fail, the digital controller will automatically Switch to the standby Pump thus preventing any downtime. The failed Pump can then be isolated and repaired / replaced.

The continuously rated Pumps used has a Stainless Steel body with a polymer impeller which helps prevent Pump seizures through infrequent operation, something common in other pressurisation units.

Baseplate Mounted
User Friendly Digital Controller
Twin Pump (Duty/Standby)
18L Break Tank with AB Air Gap
Continuously Rated Pumps
Common Volt Free Contact
High Capacity version available

The Trebles - FLYVAR range of cold water booster sets
provides fast and energy-efficient performance in a compact, simple arrangement.

The single Pump unit combined with an energy efficient variable speed drive provides constant pressure along with smooth, quiet operation. The set pressure can easily be altered via the intuitive inverter controls which also display a live pressure readout of the system.

Mounting the inverter directly onto the pressure Vessel negates any requirement for mounting brackets, keeping the FLYVAR unit compact and lightweight therefore making it ideal when space is at a premium.

Our Domestic range of single Pump cold water booster sets are the ideal solution when mains pressure isn't sufficient, and a compact, simple solution is required.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Pre-Set to your requirements
• WRAS approved
• Single Pump
• Lightweight Design
• Stainless Steel / Brass Fittings
• Pressure Guage
• Low Water Protection facility
• Fully Automatic

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Stainless Steel / Brass Fittings
• Fully Automatic
• Pressure Guage
• Low Water Protection facility
• WRAS approved
• Pre-Set to your requirements
• Single Pump
• Lightweight Design

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• WRAS approved
• Pressure Guage
• Lightweight Design
• Single Pump
• Pre-Set to your requirements
• Fully Automatic
• Low Water Protection facility
• Stainless Steel / Brass Fittings

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Pre-Set to your requirements
• Low Water Protection facility
• Lightweight Design
• Stainless Steel / Brass Fittings
• Pressure Guage
• Fully Automatic
• WRAS approved
• Single Pump

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Single Pump
• Lightweight Design
• Pre-Set to your requirements
• Pressure Guage
• Stainless Steel / Brass Fittings
• Low Water Protection facility
• WRAS approved
• Fully Automatic

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Fully Automatic
• Pressure Guage
• Single Pump
• Low Water Protection facility
• Pre-Set to your requirements
• Lightweight Design
• Stainless Steel / Brass Fittings
• WRAS approved

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Single Pump
• Pre-Set to your requirements
• Stainless Steel / Brass Fittings
• Low Water Protection facility
• Lightweight Design
• WRAS approved
• Fully Automatic
• Pressure Guage

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Low Water Protection facility
• Stainless Steel / Brass Fittings
• Single Pump
• WRAS approved
• Lightweight Design
• Pressure Guage
• Fully Automatic
• Pre-Set to your requirements

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Low Water Protection facility
• Fully Automatic
• WRAS approved
• Lightweight Design
• Stainless Steel / Brass Fittings
• Pressure Guage
• Single Pump
• Pre-Set to your requirements

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Low Water Protection facility
• Pressure Guage
• Stainless Steel / Brass Fittings
• Fully Automatic
• WRAS approved
• Pre-Set to your requirements
• Single Pump
• Lightweight Design

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Stainless Steel / Brass Fittings
• Low Water Protection facility
• Lightweight Design
• Pressure Guage
• WRAS approved
• Single Pump
• Fully Automatic
• Pre-Set to your requirements