Trebles

The Trebles - ECO-BOOST+ combines energy efficiency with reliable performance while reducing overall space requirements.
Manufactured with over 60 years of experience, this unit is a high quality, fully featured solution to your water boosting requirements.

Following installation, the system pressure is constantly monitored via a pressure transducer. Upon detecting a pressure drop caused by an open outlet, the unit automatically activates to maintain the set point. Variable speed drives will only run the Pump at the speed required thus saving huge amounts of energy compared to traditional methods of Pump control.

The touchscreen HMI combines intuitive navigation and monitoring whilst also providing BMS communication including MODBUS.

The ECO-BOOST+ range uses the latest vertical mult-stage, Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort, reliabilty and maximum energy efficiency.

Product Features:

• Hand/Off/Auto Facility
• Dry Run Protection
• Duty/Standby with Assist
• Variable Speed
• Overload Protection
• 2 Year Guarantee
• Volt Free Contacts for BMS
• Door Interlocked Isolator
• Touch Screen UI
• Hours Run Indication
• Anti-Vibration Mounts
• Initial System Fill Operation
• Auto-Changeover

The Trebles - ECO-BOOST+ combines energy efficiency with reliable performance while reducing overall space requirements.
Manufactured with over 60 years of experience, this unit is a high quality, fully featured solution to your water boosting requirements.

Following installation, the system pressure is constantly monitored via a pressure transducer. Upon detecting a pressure drop caused by an open outlet, the unit automatically activates to maintain the set point. Variable speed drives will only run the Pump at the speed required thus saving huge amounts of energy compared to traditional methods of Pump control.

The touchscreen HMI combines intuitive navigation and monitoring whilst also providing BMS communication including MODBUS.

The ECO-BOOST+ range uses the latest vertical mult-stage, Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort, reliabilty and maximum energy efficiency.

Product Features:

• Auto-Changeover
• Door Interlocked Isolator
• Duty/Standby with Assist
• Overload Protection
• Initial System Fill Operation
• Anti-Vibration Mounts
• Variable Speed
• Dry Run Protection
• Volt Free Contacts for BMS
• Hours Run Indication
• Touch Screen UI
• 2 Year Guarantee
• Hand/Off/Auto Facility

The Trebles - ECO-BOOST+ combines energy efficiency with reliable performance while reducing overall space requirements.
Manufactured with over 60 years of experience, this unit is a high quality, fully featured solution to your water boosting requirements.

Following installation, the system pressure is constantly monitored via a pressure transducer. Upon detecting a pressure drop caused by an open outlet, the unit automatically activates to maintain the set point. Variable speed drives will only run the Pump at the speed required thus saving huge amounts of energy compared to traditional methods of Pump control.

The touchscreen HMI combines intuitive navigation and monitoring whilst also providing BMS communication including MODBUS.

The ECO-BOOST+ range uses the latest vertical mult-stage, Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort, reliabilty and maximum energy efficiency.

Product Features:

• Initial System Fill Operation
• Touch Screen UI
• Anti-Vibration Mounts
• Door Interlocked Isolator
• Dry Run Protection
• Overload Protection
• Hand/Off/Auto Facility
• Auto-Changeover
• Hours Run Indication
• 2 Year Guarantee
• Volt Free Contacts for BMS
• Variable Speed
• Duty/Standby with Assist

Our Domestic range of single Pump cold water booster sets are the ideal solution when mains pressure isn't sufficient, and a compact, simple solution is required.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Pre-Set to your requirements
• WRAS approved
• Single Pump
• Lightweight Design
• Stainless Steel / Brass Fittings
• Pressure Guage
• Low Water Protection facility
• Fully Automatic

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Stainless Steel / Brass Fittings
• Fully Automatic
• Pressure Guage
• Low Water Protection facility
• WRAS approved
• Pre-Set to your requirements
• Single Pump
• Lightweight Design

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• WRAS approved
• Pressure Guage
• Lightweight Design
• Single Pump
• Pre-Set to your requirements
• Fully Automatic
• Low Water Protection facility
• Stainless Steel / Brass Fittings

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Pre-Set to your requirements
• Low Water Protection facility
• Lightweight Design
• Stainless Steel / Brass Fittings
• Pressure Guage
• Fully Automatic
• WRAS approved
• Single Pump

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Single Pump
• Lightweight Design
• Pre-Set to your requirements
• Pressure Guage
• Stainless Steel / Brass Fittings
• Low Water Protection facility
• WRAS approved
• Fully Automatic

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Fully Automatic
• Pressure Guage
• Single Pump
• Low Water Protection facility
• Pre-Set to your requirements
• Lightweight Design
• Stainless Steel / Brass Fittings
• WRAS approved

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Single Pump
• Pre-Set to your requirements
• Stainless Steel / Brass Fittings
• Low Water Protection facility
• Lightweight Design
• WRAS approved
• Fully Automatic
• Pressure Guage

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Low Water Protection facility
• Stainless Steel / Brass Fittings
• Single Pump
• WRAS approved
• Lightweight Design
• Pressure Guage
• Fully Automatic
• Pre-Set to your requirements

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Low Water Protection facility
• Fully Automatic
• WRAS approved
• Lightweight Design
• Stainless Steel / Brass Fittings
• Pressure Guage
• Single Pump
• Pre-Set to your requirements

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Low Water Protection facility
• Pressure Guage
• Stainless Steel / Brass Fittings
• Fully Automatic
• WRAS approved
• Pre-Set to your requirements
• Single Pump
• Lightweight Design

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Stainless Steel / Brass Fittings
• Low Water Protection facility
• Lightweight Design
• Pressure Guage
• WRAS approved
• Single Pump
• Fully Automatic
• Pre-Set to your requirements

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Pressure Guage
• Pre-Set to your requirements
• Single Pump
• Lightweight Design
• WRAS approved
• Stainless Steel / Brass Fittings
• Low Water Protection facility
• Fully Automatic

Designed for applications where mains pressure is insufficient, our Domestic single Pump cold water booster sets deliver a compact & straightforward boosting solution.

By mounting the Pump on top of an expansion Vessel, the cost and weight of a baseplate disappears whilst still offering a secure and sturdy unit. This reduction in weight means that the unit can easily be carried into the installation area without the need for pallet trucks and trolleys.

Once installed the system pressure will constantly be monitored via a pressure Switch or transducer (with variable speed option). On detection of a pressure drop caused by an open outlet, the unit starts automatically and maintains the desired set point. When demand ends, the booster set also stops, helping to reduce energy consumption by running only as required.

The domestic range uses the latest e-HM Stainless Steel Pumps equipped with IE3 motors in accordance with EN standards to ensure comfort and reliability.

Product Features:

• Fully Automatic
• Stainless Steel / Brass Fittings
• Pressure Guage
• Low Water Protection facility
• Lightweight Design
• WRAS approved
• Single Pump
• Pre-Set to your requirements