The accumulator vessel is a device that fitted into a pressurised water system will provide system water at a pre-set sustained pressure. This product is manufactured by Elbi. Its most common application is to supply systems in which the main supply pressure is too low and a pump is fitted to boost the pressure to an acceptable level. As system demands take place the accumulator vessel will sustain system pressure by feeding additional water into the system at the required pressure. This process will limit the number of times the pump needs to start (pump hunting) in order that system pressure remains at the optimal level.

The Elbi AFV 500 Litre Vertical Accumulator Pressure Vessel- 500 Ltr - 8 bar. is a Pressure Vessel item.

The operating pressure of this is 8 bar.

The MikroPro Expansion Vessels range serves almost any LPHW or CHW system, with capacities from 8500 Ltrs. Models up to 25 Ltrs are wall-mounted, while 35 Ltrs and above are floor-standing. This is a floorstanding vessel.

With an 500Ltr capacity with an operating pressure of 6 Bar., this is built for performance, reliability and compliance, MikroPro vessels are PED 97/23/EC compliant, rated to a maximum operating temperature of 70 C, and available with pressure ratings of 3 Bar (835 Ltrs) or 6 Bar (501000 Ltrs). Threaded connections and a durable powder-coated finish simplify installation and maintenance.

• Capacities: 8500 Ltrs
• Mounting: wall (≤25 Ltrs) or floor (≥35 Ltrs)
• Ratings: up to 70 C, 36 Bar (model dependent)
• Applications: heating and chilled water systems

A versatile, robust choice for commercial and large domestic systems requiring stable expansion capacity and long service life.

MikroPro Potable XP Expansion Vessel - 200 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

MikroPro Potable XP Expansion Vessel - 500 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

Mains Liquid Boosting Setup

The MAINSBOOST MB 200SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar. but the flow is insufficient to meet demand.
MAINSBOOST vessel systems do not require an electrical supply and operate silently.

System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required. 
If the incoming mains water pressure is less than 2.5 bar., a MAINSBOOST Charger pump can be utilised in conjunction with the MAINSBOOST vessel system to boost pressure.

The MAINSBOOST MB 200SV-1 features a nominal vessel size of 200 litres and a pressurised cold water water storage capacity of approximately 110 litres.
Each pump is supplied with the unique compact MAINSBOOST Monobloc 22/28mm Upstream Kit (USK) as standard which significantly simplifies installation.

Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all MAINSBOOST vessels are supplied with a 5 year warranty.

The 2 vessel Mainsboost 200 litre vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water. When the chamber is full the pump reaches a state of pressure equilibrium. The Mainsboost system now has a volume of pressurised water ready for distribution throughout the property.

The Flamco Airfix P DWH Expansion Vessel - 200 Litre - 2.7 bar. - Horizontal is a Expansion Vessel item.

Flexcon intermediate expansion vessels to protect Flexcon expansion vessels on elevated temperature systems. The vessels are fitted in between the expansion vessel and the system return. System water flows from the installation into the top of the vessel. From the bottom of the vessel, significantly cooler water is fed into the expansion vessel.

Vessels to protect Flexcon expansion vessels on elevated temperature systems. The vessels are fitted in between the expansion vessel and the system return. System water flows from the installation into the top of the vessel. From the bottom of the vessel, significantly cooler water is fed into. Capacity 200 Ltr.

Vessels to protect Flexcon expansion vessels on elevated temperature systems. The vessels are fitted in between the expansion vessel and the system return. System water flows from the installation into the top of the vessel. From the bottom of the vessel, significantly cooler water is fed into. Capacity 500 Ltr.