-
XY-843050
Flygt - NF-5 Double Acting Float Switch - 30mNF5 double acting float switch with 10m cable. This product is manufactured by Flygt. Max temperature 60'c, for drainage and emptying use. Cable must be clipped or weighted to provide a pivot point to give on/off function. Switching angle 45' relative to horizontal.
The Flygt NF-5 Double Acting Float Switch - 30m is a Float Switch item. It is supplied with a 30m cable.
In stock
Free Standard Delivery
-
XY-5828802
Flygt - ENM-10 Float Switch - 6mThe simplest possible method for level control A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. This product is manufactured by Flygt. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device. No wear, no maintenance
In sewage pumping stations, for ground water and drainage pumping — in fact, for most level control applications — the ENM-10 is the ideal solution. The regulator casing is made of polypropylene and the cable is sheathed with a special PVC or Nitrile/PVC rubber compound. The plastic components are welded and screwed together. Adhesive is never applied. Impurities and deposits will not adhere to the smooth casing.
The Flygt ENM-10 Float Switch - 6m is a Switch item. It is supplied with a 6m cable. It features a Float Switch.
In stock
Free Standard Delivery
-
XY-5828803
Flygt - ENM-10 Float Switch - 13mThe simplest possible method for level control A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. This product is manufactured by Flygt. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device. No wear, no maintenance
In sewage pumping stations, for ground water and drainage pumping — in fact, for most level control applications — the ENM-10 is the ideal solution. The regulator casing is made of polypropylene and the cable is sheathed with a special PVC or Nitrile/PVC rubber compound. The plastic components are welded and screwed together. Adhesive is never applied. Impurities and deposits will not adhere to the smooth casing.
The Flygt ENM-10 Float Switch - 13m is a Float Switch item. It is supplied with a 13m cable. It features a Float Switch.
In stock
Free Standard Delivery
-
XY-5828804
Flygt - ENM-10 Float Switch - 20mThe simplest possible method for level control A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. This product is manufactured by Flygt. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device. No wear, no maintenance
In sewage pumping stations, for ground water and drainage pumping — in fact, for most level control applications — the ENM-10 is the ideal solution. The regulator casing is made of polypropylene and the cable is sheathed with a special PVC or Nitrile/PVC rubber compound. The plastic components are welded and screwed together. Adhesive is never applied. Impurities and deposits will not adhere to the smooth casing.
The Flygt ENM-10 Float Switch - 20m is a Switch item. It is supplied with a 20m cable. It features a Float Switch.
In stock
Free Standard Delivery
-
ST19071
Stuart Turner - Monsoon Reed Switch KitReplacement reed switch suitable for all Monsoon Standard and Monsoon Universal pumps manufactured after 2008.
Contents:
- Reed Switch x1
- Strain Relief Bush x1
- Tie Wrap x1
- Screw Self Tapping 3.5mmx12mm x4
- Screw Self Tapping K40x16mm x4
Stuart Turner (est. 1906) is a UK manufacturer of water boosting and pressurisation systems. Their ranges include shower pumps, whole-house boosting sets and mains-pressure solutions. Typical applications are improving water pressure and flow in homes and light commercial buildings.
In stock
-
ST-41011
Stuart Turner - Pump Control Module - 1.5 Bar. cut-in - 240VUnit Management Module
The Management Module remotely switches pumps without controls and can be utilised in both positive and negative head plumbing systems.
The pump incorporates a pressure switch to start a connected pump and a flow switch to stop the pump, ensuring a continuous supply of boosted water to all outlets without hunting. Incorporating pump run dry protection, the control module features a simple LED display for power on, pump running and fault indication.
The pump is supplied with a 70 mm long extension piece allowing the module to clear the pump terminal box.In stock
Free Standard Delivery
-
39017179
KSB - Cable & Gland with Float Switch - KSB - AMA Porter 500 & 600Cable and gland with float switch for KSB AMA porter 500 and 600 Series
The KSB Cable & Gland with Float Switch - KSB AMA Porter 500 & 600 is a Spares item.
This product is manufactured by KSB.KSB (est. 1871) is a German manufacturer of pumps and valves for water, wastewater and industry. Product ranges include centrifugal process pumps, booster systems and submersible sewage pumps. Typical applications include public water treatment, building services, industrial processing and power-generation-related water duties.
In stock
Free Standard Delivery
-
ALC-FD113
Alco - FD113S Pressure SwitchPedrollo Alco FD113S is a submersible drainage or wastewater pump within the Pedrollo Alco portfolio (variant dependent).
The FD series is typically selected for clear or lightly contaminated water and domestic drainage applications, depending on specification.
In stock
Free Standard Delivery
HG8JE8A
Clarke - HSEC 651A Float SwitchThe Clarke - HSEC 651A Float Switch Power lead and float swich only for Clarke HSEC 651A - 110v.10m lead.
Out Of Stock
Float Switches & Pressure Switches
Float switches and pressure switches keep your pumping systems in check. They monitor water levels and system pressure, automatically turning pumps on or off to prevent overflows, dry running, or damage.
Float switches detect rising or falling water levels and trigger the pump at just the right moment. Pressure switches maintain the correct system pressure, ensuring pumps deliver the flow and force needed without constant attention.
At Pumpify, we offer a range of switches for simple setups and more complex systems alike. Easy to fit and reliable in operation, they give you control and confidence, so your pump system works as it should.















