Maintain potable water hygiene and stable pressure with the Flamco Airfix A flow-through expansion vessel for mains-fed potable and fresh-water systems.

For use in potable water, or fresh-water installations.

The Airfix A expansion vessels operate in such a way that the water flows right through and they are continuously flushed with fresh water from the mains.

This prevents tepid, stagnant water from collecting in the vessel in which bacterial growth could occur.

Therefore, users can be assured of high quality potable water.

Applying an Airfix A expansion vessel to a water heater prevents the opening of the safety group or safety valve each time the potable water is heated.

A synthetic flow-through device installed in a standard T-piece (not included) diverts part of the line flow through the vessel to prevent stagnation. This reduces nuisance safety-valve lift on water heaters and avoids waste, while keeping water continuously refreshed.

• Flow-through design helps suppress bacterial growth
• Protects safety devices by reducing valve lift and leakage risk
• Taste/odour neutral butyl diaphragm for potable use
• Corrosion-resistant internal coatings on water and nitrogen sides

Factory nitrogen pre-charge supports long-term pressure stability. Internationally approved and certified. Compatible with Airfixcontrol for quick annual pre-charge checks.

The Flamco Airfix P Expansion Vessel - 50 Litre - 2.7 bar. - Horizontal is a Expansion Vessel item.

Zilmet Ultra-Pro Vertical Expansion Vessel - 10 Bar. - 50Ltr Zilmet ULTRA‑PRO pressure vessels are designed for high‑performance potable water and booster systems where reliability and.

Zilmet Ultra-Pro Horizontal Expansion Vessel - 10 Bar. - 50Ltr Zilmet ULTRA‑PRO pressure vessels are designed for high‑performance potable water and booster systems where reliability and.

Zilmet Hydro-Pro Vertical Expansion Vessel - 10 Bar. - 50Ltr Zilmet HYDRO‑PRO pressure vessels are designed for potable water and booster systems where stable pressure and efficient pump.

Zilmet Hydro-Pro Horizontal Expansion Vessel - 10 Bar.- 50Ltr Zilmet HYDRO‑PRO pressure vessels are designed for potable water and booster systems where stable pressure and efficient pump.

Zilmet Cal-Pro Vertical Expansion Vessel - 4 Bar. - 50Ltr Zilmet CAL‑PRO expansion vessels are designed for sealed heating systems to absorb thermal expansion as water temperature increases.

Built for sealed heating (EN 12828) and chilled-water systems, Flexcon Premium Expansion Vessels stabilise system pressure by absorbing thermal expansion so plant runs safely and efficiently.

A new TPO (thermoplastic polyolefin) diaphragm on 1235 Ltrs models delivers high flexibility and extremely low permeability, helping the pre-charge hold for longer. Lighter construction cuts material use and transport emissions; packaging is FSC-certified to reduce CO₂ impact.

• Sustainable design lighter TPO membrane uses up to 50% less material
• Long service life 15-year warranty
• Low permeability pre-charge pressure maintained for longer
• Heating & cooling suitable for LPHW and CHW installations

Vessels comply with EN 13831 and the Pressure Equipment Directive 2014/68/EU. Red epoxy powder coating (RAL 3002). Flexcon Premium 3580 are supplied with feet and a mounting kit.

Built for sealed potable hot and chilled water systems in domestic and commercial settings, these Potable Water Expansion Vessels stabilise pressure by absorbing thermal expansion for safe, reliable operation.

A nitrogen pre-charge helps retain set pressure longer, while a single threaded steel connection with plastic insert provides a durable, non-flow-through design. Suitable for central heating, cooling and tap water applications (not for solar collector circuits).

• Nitrogen gas filling for longer pre-charge retention
• Single threaded steel connection with plastic insert (no flow-through)
• Potable use supports domestic hot/chilled water
• Heating & cooling compatible for sealed systems

Designed for long service life with broad operating limits and glycol tolerance for demanding installations.

Grundfos GT-D are maintenance-free double-diaphragm pressure tanks with a capacity ranging from 100 to 450 litres.
The tanks are designed for a maximum operating pressure of 10 bar and a maximum liquid temperature of 90 °C.

The tank is a steel pressure tank with a patented controlled-action CAD-2 diaphragm assembly, pre-charged to 1.4 bar. The tanks have a non-replaceable, chlorine-resistant 100 % butyl diaphragm with a precision-moulded copolymer polypropylene liner for superior air and water separation. The diaphragm assembly seals water in a truly non-corrosive chamber, while the air chamber is sealed with a fixed O-ring and closed cell foam, which provides long-lasting and service-free durability.

The tank is appropriate for drinking-water applications in combination with installations with booster systems, well systems, irrigation systems, thermal expansion, hydronic heating expansion, hydraulic hammer arresting and clean water backwash for ultra-filtration systems. The tank also features: