Lowara

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 8SC3/09/5 T L20 Scuba Submersible Pump - 400v - 3 Phase - Without Float is a Submersible product. Voltage for this item is 400V. It is supplied with a 20m cable. It has an actual flow rate of 180 Ltr/min. The maximum head for this pump is 33m.

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 8SC4/11/5 T L20 Scuba Submersible Pump - 400v - 3 Phase - Without Float is a Submersible product. Voltage for this item is 400V. It is supplied with a 20m cable. It has an actual flow rate of 180 Ltr/min. The maximum head for this pump is 43m.

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 8SC5/15/5 T L20 Scuba Submersible Pump - 400v - 3 Phase - Without Float is a Submersible product. Voltage for this item is 400V. It is supplied with a 20m cable. It has an actual flow rate of 180 Ltr/min. The maximum head for this pump is 55m.

Order this Lowara Scuba Pump direct from Pumpify and receive standard free delivery.

This submersible pump by Lowara is made from corrosion-resistant Stainless Steel.

To ensure long life, the motor has an oil lubricated, double mechanical seal system to prevent water ingress. This product is manufactured by Lowara. The Stainless Steel rotating shaft is also protected by a 'V' ring which prevents sand and other abrasive material damaging the shaft seals.

The single phase version has an internal capacitor and built-n thermal protection. For this reason, the pump does not require connection to a starter box allowing a neater installation.

Available with or without float switch for automatic operation.

Specifications
¢ºMaximum liquid temperature: 40°C
¢ºMaximum immersion depth: 17 Metres
¢ºOutlet: 1-1/4" B.S.P. Female
¢ºPower cable: 20 Metres
¢º230V pumps are fitted with UK 3 pin plug
¢ºHorizontal or vertical installation

Materials
¢ºPump body: AISI 304 Stainless Steel
¢ºImpeller: Technopolymer

The Lowara 8SC6/22/5 T L20 Scuba Submersible Pump - 400v - 3 Phase - Without Float is a Submersible product. Voltage for this item is 400V. It is supplied with a 20m cable. It has an actual flow rate of 180 Ltr/min. The maximum head for this pump is 65m.

The Lowara Hydrovar HVL2.022-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 230V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.

The Lowara Hydrovar HVL2.030-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 230V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.

The Lowara Hydrovar HVL2.040-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 240V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.

The Lowara Hydrovar HVL4.015-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 400V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.

The Lowara Hydrovar HVL4.022-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 400V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.

The Lowara Hydrovar HVL4.030-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 400V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.

The Lowara Hydrovar HVL4.040-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 400V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.

The Lowara Hydrovar HVL4.055-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 400V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.

The Lowara Hydrovar HVL4.075-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 400V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.

The Lowara Hydrovar HVL4.110-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 400V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.

The Lowara Hydrovar HVL4.150-A0010 Variable Speed Drive is a Pump Control Module item. This product is manufactured by Lowara. Voltage for this item is 400V.

HYDROVAR is an intelligent controller that matches pump performance to demand.

It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.

Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times. A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.

The controls available include constant pressure, system curve, constant flow or via an external signal.