Stainless steel manual sump pump, max flow rate 3.8l/sec and max head 9m, 1 1/4" threaded connections and 10mm solids handling

Stainless steel manual sump pump, max flow rate 2.3l/sec and max head 5m, 1 1/4" threaded connections and 10mm solids handling

UNILIFT AP50B is a stainless-steel submersible pump designed for pumping wastewater with particles up to 50 mm. It can be installed on an auto coupling, allowing for easy maintenance and other purposes.

UNILIFT AP50B is a stainless-steel submersible pump designed for pumping wastewater with particles up to 50 mm. It can be installed on an auto coupling, allowing for easy maintenance and other purposes.

UNILIFT AP35B is a stainless-steel submersible pump designed for pumping effluents with particles up to 35 mm. It can be installed on an auto coupling, allowing for easy maintenance and other purposes.

UNILIFT AP35B.50.08.1V
Submersible effluent pump unit

Vertical single-stage Stainless Steel submersible pump with integrated submersible 1-phase motor.

The pump is equipped with ring stand and carrying handle and is supplied with a 10 m mains cable.

The impeller is a VORTEX impeller for 35 mm free passage appropriate for pumping surface water, groundwater, wastewater and similar.

The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.

The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings.

The pump has Rp 2 inch discharge port and is ready for installation either free-standing or on an auto-coupling assembly.

Suitable for: Commercial wastewater, Domestic wastewater

UNILIFT AP35B is a stainless-steel submersible pump designed for pumping effluents with particles up to 35 mm. It can be installed on an auto coupling, allowing for easy maintenance and other purposes.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB AMA Porter 601 ND Submersible Drainage Pump - 3 Phase - Without Float Switch is a Submersible product. Voltage for this item is 400V. It has an actual flow rate of 283 Ltr/min. The maximum head for this pump is 21m.

Applications Installation Kit Not Included It is recommended to purchase the Portable Installation Kit, which includes a hosetail, feet, and fixings, for optimal performance.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB AMA Porter 501 NE Submersible Drainage Pump - Single Phase - Without Float Switch is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 283 Ltr/min.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB AMA Porter 502 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 283 Ltr/min.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 503 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 601 NE Submersible Drainage Pump - Single Phase - No Float Switch is a Submersible product. Voltage for this item is 240V. It has an actual flow rate of 500 Ltr/min. The maximum head for this pump is 8m.

A vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey Cast Iron variant), non-explosion-proof.

Appropriate for handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

High operating reliability even under tough operating conditions, due to generously sized motor, thermal overload protection by temperature switch integrated in the winding, and encapsulated, watertight motor design.

Safe connection Plug-type connector, polarized to prevent incorrect insertion.

Service-friendly right down to details: wetted bolts made of Stainless Steel. This product is manufactured by KSB. Easy to dismantle, even after years of operation.

Easy installation and removal Automatic, bolt-free connection for stationary installation; leakage prevented by flexible sealing.

Trouble-free operation Clogging by coarse particles is prevented by

¢ large passage (free-flow impeller "F³)

¢ by cutter with high mechanical resistance for waste water (cutter "S³)

Long service life thanks to shaft made of corrosion-resistant Stainless Steel and bi-rotational mechanical seal with special SiC/Al2 O3 contact faces.

Installation Kit Not Included

The KSB Ama Porter 602 NE Submersible Drainage Pump - Single Phase - Without Float Switch is a Submersible product. Voltage for this item is 230V. It has an actual flow rate of 283 Ltr/min. The maximum head for this pump is 21m.