The Tsurumi - LSC1.4S Puddle Pump - 10-10-1222 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1222
• Voltage: 230V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - POMA5 is a submersible drainage water Pump - 10-10-1072 designed for efficient and reliable operation in various domestic and industrial Uses.

The *POMA4/5 pump is light, compact pump, has an energy efficient motor and integral anti-airlock valve. It can pump waste containing fibrous material and suspended soft solids. With a tube type float switch, for automatic operation in areas with limited space or where precise level control is required. Liquid paraffin is used for the lubrication oil, which enables use in food processing and aquaculture. It is not recommended for ponds or water features.

Users of 230Volts have the option to select from two versions: the "domestic" is supplied with a hose tail and a hose clip (for fitting to flexible discharge hose) and a 3 pin plug (fitted with a 5 amp fuse).

The "industrial" has a female BSP outlet (for fitting rigid waste pipe) but a plug is not supplied. 110Volt pumps are supplied as "industrial".
*Please confirm with our sales team which version is available

The pump is engineered using 304 Stainless Steel and thermoplastic materials, making it strong, durable, and corrosion-resistant. Its compact design allows it to fit in narrow sumps, with a maximum diameter of only 225 mm including the level control.

• Motor: The pump is equipped with an energy-efficient 150-watt motor that generates excellent flow and pressure
• Automatic Operation: It features an integral tube float switch for fully automatic operation, which is particularly suitable for narrow sumps or where traditional pendant-type floats might be obstructed

• Anti-Airlock Mechanism: The pump includes an integral vent valve to prevent air locking, ensuring long-term, trouble-free operation
• Durable Shaft: It has a 403 Stainless Steel shaft fitted with an ultra hard-wearing twin mechanical seal
• Impeller: The pump uses a semi-vortex thermoplastic impeller
• Power Cable: It comes supplied with 10 metres of heavy-duty rubber power cable

The Tsurumi - POMA5 is suitable for various Uses, including:

• Cellar drainage
• Processing duties
• Water company operations
• General domestic and industrial drainage tasks

The Tsurumi - POMA5 is designed to provide reliable, efficient, and automatic drainage solutions for both domestic and industrial settings, making it a versatile choice for various pumping needs.

The Tsurumi - POMA4 is a submersible drainage water Pump - 10-10-1257 designed for efficient and reliable operation in various domestic and industrial Uses.

The *POMA4/5 pump is light, compact pump, has an energy efficient motor and integral anti-airlock valve. It can pump waste containing fibrous material and suspended soft solids. With a tube type float switch, for automatic operation in areas with limited space or where precise level control is required. Liquid paraffin is used for the lubrication oil, which enables use in food processing and aquaculture. It is not recommended for ponds or water features.

Users of 230Volts have the option to select from two versions: the "domestic" is supplied with a hose tail and a hose clip (for fitting to flexible discharge hose) and a 3 pin plug (fitted with a 5 amp fuse).

The "industrial" has a female BSP outlet (for fitting rigid waste pipe) but a plug is not supplied. 110Volt pumps are supplied as "industrial".
*Please confirm with our sales team which version is available

The pump is engineered using 304 Stainless Steel and thermoplastic materials, making it strong, durable, and corrosion-resistant. Its compact design allows it to fit in narrow sumps, with a maximum diameter of only 225 mm including the level control.

• Motor: The pump is equipped with an energy-efficient 150-watt motor that generates excellent flow and pressure
• Automatic Operation: It features an integral tube float switch for fully automatic operation, which is particularly suitable for narrow sumps or where traditional pendant-type floats might be obstructed

• Anti-Airlock Mechanism: The pump includes an integral vent valve to prevent air locking, ensuring long-term, trouble-free operation
• Durable Shaft: It has a 403 Stainless Steel shaft fitted with an ultra hard-wearing twin mechanical seal
• Impeller: The pump uses a semi-vortex thermoplastic impeller
• Power Cable: It comes supplied with 10 metres of heavy-duty rubber power cable

The Tsurumi - POMA4 is suitable for various Uses, including:

• Cellar drainage
• Processing duties
• Water company operations
• General domestic and industrial drainage tasks

The Tsurumi - POMA4 is designed to provide reliable, efficient, and automatic drainage solutions for both domestic and industrial settings, making it a versatile choice for various pumping needs.

The Tsurumi - HS2.75S Submersible Pump - 10-10-1058 is a versatile and reliable piece of equipment designed for various drainage Uses in environments like construction, industrial, and domestic settings. This particular model, with part number 10-10-1058, features a pendant float switch and operates on a 110V power supply.

For the automatic control of water levels, the HS series is available with sensor and float switches: The Sensor switch has two 304 Stainless Steel probes that are encapsulated in moulded rubber and it is designed for portable Uses. The compact design and precise water level control also makes it suitable for fixed installations and narrow or shallow sumps. During use, when both probes touch water, the pump will start and continue to operate for one minute after the water level drops. However, if the water touches both probes again within this time, the pump continues pumping for another minute and will continue like this on demand, so keeping the water level constantly below the level of the probes at all times. The off level can be as low as the level of the water entry of the volute at 50mm, depending on the sump size or area being drained. Probes can be lengthened by 70mm or 170mm, with optional extensions, to enable a lower "on" and "off" level. 

The  float-switch has a power cable connected to a waterproof case that contains a ball bearing actuated switch and is designed for portable and fixed installations. The cable is clamped to the pump, with a small amount of adjustment to alter the "on" and "off" level. 

The  float-switch has a switch actuated by a floating cylinder, housed within a tube. Compact, with fixed "on" and "off" levels for precise level control, it is intended for narrow sumps and fixed installations.

Performance

• Maximum Flow Rate: 230 litres per minute
• Maximum Head: 18 metres

Technical Details

• Power: 0.75 kW
• Outlet Diameter: 50 mm (2 inches)
• Free Passage: 7 mm

The Tsurumi - HS2.75S is primarily used as a contractor pump for on-site drainage duties. Its robust construction and reliable dynamic performance make it suitable for:

• Construction site dewatering
• Flood water removal
• Industrial wastewater management
• Domestic drainage issues

The pump is built with durability in mind, featuring:

• Submersible design for efficient operation in water
• Pendant float switch for automatic operation
• Compact and portable build for easy transportation and placement

• High dynamic performance with a good balance of flow rate and head capacity
• Versatile usage across various Uses
• Automatic operation with the pendant float switch, reducing the need for constant monitoring
• Robust construction to withstand demanding work environments

The Tsurumi - HS2.75S Submersible Pump with pendant float switch and 110V power supply is an excellent choice for professionals and homeowners alike who require a reliable and efficient solution for water removal and drainage tasks.

The Tsurumi - BPS-100V Submersible Drainage Pump - 15-10-1019 (Part No. 15-10-1019) is a versatile and efficient automatic pump designed for a variety of drainage Uses. This 230V model offers a combination of reliability, dynamic performance, and convenience for both domestic and light industrial use.

The BPS series has a water cooled, top discharge design for Uses where space is limited, operating while partially submerged or during short periods of dry running. Available as manual or with a pendant float switch, for automatic operation. The BPS-100A(V) automatic model incorporates a tube type float switch for narrow sump Uses. Manual versions of models BPS-80 and BPS-100 are fitted with residue strainers which enables the pumping of water down to 3mm. For use in domestic, trade and industrial Uses, but not recommended for ponds or water features. 

Product Engineering Information

The BPS-100V is manufactured using durable thermoplastic materials, making it suitable for pumping clean to slightly dirty water. It features a top discharge design, allowing for use in partial immersion scenarios or areas with limited space.

Performance

• Maximum flow rate: 70 litres per minute
• Maximum head: 6.5 metres
• Power: 0.10 kW

Automatic Operation

This model is equipped with a tube-type float switch, specifically designed for narrow sump Uses. The pump automatically activates when the water level reaches approximately 300mm and shuts off at 150mm.

Durability

The pump incorporates a 304 Stainless Steel shaft, enhancing its durability and resistance to corrosion. It also features a carbon/ceramic mechanical seal housed in an intermediate oil chamber with an inner lip seal, providing excellent wear resistance and protection during short periods of dry running.

Versatility

The BPS-100V comes with both 19mm and 25mm outlet options, allowing for flexibility in various installation scenarios.

This submersible pump is ideal for:

• Basement drainage
• Flood control
• Light industrial use
• Domestic water removal

While it offers excellent reliability for many Uses, it is not recommended for use in ponds or water features.

• Supplied with 10 metres of heavy-duty rubber power cable
• Free passage: 3mm
• Dimensions (W x L x H): 134 x 155 x 250 mm
• Dry weight: 2.70 kg

The Tsurumi - BPS-100V combines efficient dynamic performance with user-friendly features, making it an excellent choice for those seeking a reliable automatic submersible drainage pump for various Uses.

The Tsurumi - KTVE21.5 Drainage Pump - 10-10-1204 is a high performing automatic submersible pump designed for efficient dewatering in construction and industrial Uses. This three-phase, 400V model offers a robust solution for managing water and light slurries in challenging environments.

The KTVE pumps offer an automatic option to the KTV series, without the need for external control panels and cumbersome float switches. A sensor probe is mounted in a durable, moulded rubber bracket and, for added protection, it is positioned within the footprint of the pump base. Once the water level reaches the probe, the pump will start and continue to operate for one minute after the water falls below it. However, if the water level touches the probe within this time, the "stop" signal is cancelled and the pump continues to run until the water is cleared. To enable a lower "on level" (by a further 90mm), the sensor probe can be lengthened by fitting the electrode extender, which is an optional extra. 

Special use option: IDS (individually screened cable) on 3.7KW and 5.5KW models. (Please request a quotation)

Key Features:

The KTVE21.5 is part of Tsurumi's KTVE series, which consists of submersible three-phase automatic portable drainage pumps. It incorporates an innovative electrode-type relay unit built into the pump, enabling automatic start and stop functionality to prevent dry running. This feature significantly reduces power consumption and extends the pump's operational lifespan.

Key Product Spec:

• Motor Output: 1.5 kW
• Discharge Bore: 50mm
• Phase: Three-phase
• Starting Method: Direct-on-line (D.O.L.)
• Solids Passage: 8.5mm

Product Engineering Information:

The pump features a top discharge, side flow design that ensures efficient motor cooling, even when operating with its motor exposed to air. Its slim profile allows for placement in confined spaces, making it ideal for various construction and foundation works.

dynamic performance:

While lightweight for improved portability, the KTVE21.5 maintains the capacity to handle typical pumping tasks found on construction sites and in industrial settings. The automatic operation eliminates the need for external control panels and cumbersome float switches, simplifying installation and operation.

Uses:

This pump is well-suited for heavy-duty site drainage, dewatering Uses, and general water transfer tasks in construction and industrial environments.

The Tsurumi - KTVE22.2 is a heavy-duty automatic submersible drainage Pump - 10-10-1037 designed for demanding site dewatering Uses. This robust 400V three-phase pump offers efficient and reliable dynamic performance without the need for external control panels or float switches.

The KTVE pumps offer an automatic option to the KTV series, without the need for external control panels and cumbersome float switches. A sensor probe is mounted in a durable, moulded rubber bracket and, for added protection, it is positioned within the footprint of the pump base. Once the water level reaches the probe, the pump will start and continue to operate for one minute after the water falls below it. However, if the water level touches the probe within this time, the "stop" signal is cancelled and the pump continues to run until the water is cleared. To enable a lower "on level" (by a further 90mm), the sensor probe can be lengthened by fitting the electrode extender, which is an optional extra. 

Special use option: IDS (individually screened cable) on 3.7KW and 5.5KW models. (Please request a quotation)

Automatic Operation:

The KTVE22.2 features an innovative built-in sensor probe mounted in a durable rubber bracket within the pump base footprint. This sensor automatically starts the pump when water reaches the probe level and continues operation for one minute after the water level drops below it.

dynamic performance:

• Maximum flow rate: 525 litres per minute
• Maximum head: 24 metres
• Motor power: 2.2 kW
• Voltage: 400V three-phase

Construction:

• Outlet: 2" BSPM (British Standard Pipe Male) and 50mm
• Free passage: 8.5mm
• Dimensions: 240mm diameter x 486mm height
• Dry weight: 25 kg

Durability:

The pump features a cast-iron casing and motor frame, with a chromium iron open impeller for exceptional wear resistance against sand, silt, and slurry.

The Tsurumi - KTVE22.2 is ideal for:

• Construction sites
• Quarries
• Industrial processes
• Tunnelling
• Mining operations

Its robust design and automatic operation make it particularly suitable for continuous-duty pumping in challenging environments where water may contain suspended solids.

The Tsurumi - LSC1.4S H2O Puddle Pump - 10-10-1224 with Automatic H¢ššO Sensor Switch is a versatile and efficient submersible pump designed for low-level water drainage Uses. This 230V model, identified by SKU 10-10-1224, offers exceptional dynamic performance and reliability for various industrial and residential uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

Pumping Capability: The LSC1.4S H2O can pump water down to an impressively low level of just 1mm, making it ideal for removing water from flat surfaces.

Power and dynamic performance:

• Power: 0.48 kW
• Maximum flow rate: 170 litres per minute
• Maximum head: 11 metres

Sizing and Weight Information:

• Size: 221 x 196 x 385 mm (w x l x h)
• Dry weight: 12.05 kg

Outlet Size: 25mm (1 inch)

Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder.

Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring.

Cable: Includes 10 metres of low-voltage, PVC power cable.

Versatility: Suitable for various Uses, including flood control, construction sites, utilities, and fixed installations.

Durability: Features a pressed steel outer casing and cast aluminium pump stand for increased protection and longevity.

• Integral swing check valve to prevent backflow of water
• 403 Stainless Steel shaft with ultra hard-wearing twin mechanical seal
• Patented oil chamber with oil lifter for seal lubrication during operation in any position
• Capable of extended operation with little or no water

The Tsurumi - LSC1.4S H2O Puddle Pump combines advanced technology with robust construction, making it an excellent choice for professionals seeking a reliable and efficient water removal solution.

The Tsurumi - LSC1.4S H2O Puddle Pump - 10-10-1071 with Automatic H¢ššO Sensor Switch is a versatile and efficient submersible pump designed for low-level water drainage Uses. This 230V model, identified by SKU 10-10-1071, offers exceptional dynamic performance and reliability for various industrial and residential uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

Pumping Capability: The LSC1.4S H2O can pump water down to an impressively low level of just 1mm, making it ideal for removing water from flat surfaces.

Power and dynamic performance:

• Power: 0.48 kW
• Maximum flow rate: 170 litres per minute
• Maximum head: 11 metres

Sizing and Weight Information:

• Size: 221 x 196 x 385 mm (w x l x h)
• Dry weight: 12.05 kg

Outlet Size: 50mm (2 inch)

Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder.

Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring.

Cable: Includes 10 metres of low-voltage, PVC power cable.

Versatility: Suitable for various Uses, including flood control, construction sites, utilities, and fixed installations.

Durability: Features a pressed steel outer casing and cast aluminium pump stand for increased protection and longevity.

• Integral swing check valve to prevent backflow of water
• 403 Stainless Steel shaft with ultra hard-wearing twin mechanical seal
• Patented oil chamber with oil lifter for seal lubrication during operation in any position
• Capable of extended operation with little or no water

The Tsurumi - LSC1.4S H2O Puddle Pump combines advanced technology with robust construction, making it an excellent choice for professionals seeking a reliable and efficient water removal solution.

The Tsurumi - OMA5 Industrial Drainage Pump - 10-10-1202 is a versatile and efficient submersible pump designed for various drainage Uses. This automatic, single-phase pump operates on 230V power and is part of Tsurumi's OMA series, renowned for its reliability and dynamic performance in handling water containing small solids.

The OMA pumps are light, compact, have energy efficient motors and integral anti-airlock valves. Available with a tube type float switch, for automatic operation in areas with limited space or where precise level control is required. Liquid paraffin is used for the lubrication oil, which enables use in food processing and aquaculture. They are not recommended for ponds or water features.

Users of 230 volts have the option to select from two versions: the "domestic" is supplied with a hose tail, a hose clip (for fitting to flexible discharge hose) and a 3 pin plug (fitted with a 5 amp fuse).

The "industrial" has a female BSP outlet (for fitting rigid waste pipe) but a plug is not supplied. 110Volt pumps are supplied as "industrial".

Compact and Lightweight Design: The OMA5 pump features a light, compact construction, making it easy to transport and install in a variety of settings.

Automatic Operation: Equipped with a built-in float switch, this pump offers automatic water level control, enhancing its convenience and efficiency in drainage tasks.

Energy-Efficient Motor: The pump is designed with an energy-efficient motor, ensuring optimal dynamic performance while minimising power consumption.

Anti-Airlock Valve: An integral anti-airlock valve is incorporated into the design, preventing air from becoming trapped in the pump and ensuring consistent operation.

Vortex Impeller: The OMA5 utilises a vortex impeller, which is particularly effective in handling water containing small solids and reducing the risk of clogging.

• Power Supply: Single-phase, 230V
• Discharge Connection: 32mm (1.25 inches)
• Maximum Temperature: Suitable for fluids up to 40°C
• Impeller Material: Glass fibre-reinforced plastic
• Casing: Glass fibre-reinforced plastic, providing corrosion and abrasion resistance
• Motor Protection: Built-in thermal cut-out for added safety

The Tsurumi - OMA5 Industrial Drainage Pump is ideal for various Uses, including household wastewater management, construction site drainage, and general water transfer tasks where automatic operation and reliable dynamic performance are essential.

The Tsurumi - OMA5 Domestic Drainage Pump - 10-10-1241 is a compact and efficient submersible pump designed for residential and light industrial Uses. This automatic model offers reliable dynamic performance for managing drainage and wastewater in various settings.

The OMA pumps are light, compact, have energy efficient motors and integral anti-airlock valves. Available with a tube type float switch, for automatic operation in areas with limited space or where precise level control is required. Liquid paraffin is used for the lubrication oil, which enables use in food processing and aquaculture. They are not recommended for ponds or water features.

Users of 230 volts have the option to select from two versions: the "domestic" is supplied with a hose tail, a hose clip (for fitting to flexible discharge hose) and a 3 pin plug (fitted with a 5 amp fuse).

The "industrial" has a female BSP outlet (for fitting rigid waste pipe) but a plug is not supplied. 110Volt pumps are supplied as "industrial".

Technical Details:

• Model: OMA5 (Automatic)
• Voltage: 230V (Single Phase)
• Power: 0.15 kW
• Outlet Size: 32mm
• Maximum Flow Rate: 185 l/min
• Maximum Head: 7.5 metres
• Free Passage: 10mm

Product Sizing:

• Dimensions: 177 x 203 x 319mm (W x L x H)
• Dry Weight: 6.1 kg

Operational Features:

• Automatic Operation: On Level at 222mm, Off Level at 66mm
• Industrial Classification: Domestic use

The OMA5 pump is equipped with an integral anti-airlock valve and an energy-efficient motor, making it suitable for pumping waste containing small solids and fibrous material. Its lightweight design and compact size allow for easy installation and maintenance in confined spaces. The automatic float switch ensures hassle-free operation by activating the pump when water levels rise and shutting it off when the water recedes to the preset level.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1144 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1144
• Voltage: 110V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1057 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1057
• Voltage: 110V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1157 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1157
• Voltage: 230V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - LSC2.75S Puddle Pump - 10-10-1352 (SKU 10-10-1352) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This automatic, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

• Model: LSC2.75S
• Voltage: 230V
• Power: 0.75 kW
• Maximum Flow Rate: 230 litres per minute
• Maximum Head: 15 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 438mm height
• Dry Weight: 15.2 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC2.75S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S H2O Puddle Pump - 10-10-1252 with Automatic H¢ššO Sensor Switch is a versatile and efficient submersible pump designed for low-level water drainage Uses. This 110V model, identified by SKU 10-10-1252, offers exceptional dynamic performance and reliability for various industrial and residential uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

Pumping Capability: The LSC1.4S H2O can pump water down to an impressively low level of just 1mm, making it ideal for removing water from flat surfaces.

Power and dynamic performance:

• Power: 0.48 kW
• Maximum flow rate: 170 litres per minute
• Maximum head: 11 metres

Sizing and Weight Information:

• Size: 221 x 196 x 385 mm (w x l x h)
• Dry weight: 12.05 kg

Outlet Size: 25mm (1 inch)

Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder.

Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring.

Cable: Includes 10 metres of low-voltage, PVC power cable.

Versatility: Suitable for various Uses, including flood control, construction sites, utilities, and fixed installations.

Durability: Features a pressed steel outer casing and cast aluminium pump stand for increased protection and longevity.

• Integral swing check valve to prevent backflow of water
• 403 Stainless Steel shaft with ultra hard-wearing twin mechanical seal
• Patented oil chamber with oil lifter for seal lubrication during operation in any position
• Capable of extended operation with little or no water

The Tsurumi - LSC1.4S H2O Puddle Pump combines advanced technology with robust construction, making it an excellent choice for professionals seeking a reliable and efficient water removal solution.