By Range
-
The Calpeda MXH series is a compact, horizontal ...
-
Calpeda MXHM pumps take the MXH design further, ...
-
The Calpeda NM range is all about simplicity an ...
-
The Ebara 2CDX range is built for when you need ...
-
Compact, efficient, and tough. The EBARA 2CDXM ...
-
The Ebara 3M ra ...
-
The Ebara GS r ...
-
The Ebara CD range is your go-to for reliable, ...
-
The Ebara CDM range takes the CD series up a no ...
-
The Ebara CDX range is designed for high-demand ...
-
Compact, horizontal, multistage end-suction pum ...
-
The CME series takes the CM design and adds eve ...
-
Single-stage, horizontal end-suction pumps desi ...
-
The NBE pumps are NB siblings with extended per ...
-
NK pumps are single-stage, horizontal end-sucti ...
-
The NKE series builds on the NK with stainless ...
-
The Lowara BGM ...
Featured End Suction Pumps
Browse the featured products, hand picked by the Pump Sales Direct Team
-
98946031
Grundfos - NBE 32-125/106AAF2AESBQQEGWB End Suction Pump - 400V - Three Phase - 338 Ltr/min. - Cast IronNBE 32-125/106 AAF2AESBQQEGWB
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
£4,408.80 RRP £3,086.16 £2,571.80
In stock
Free Standard Delivery
-
98973421
Grundfos - NK 100-160/160-140BA2F2AESBQQEIW3 Long Coupled Single Stage End Suction Pump - 400V - Three Phase -1921 Ltr/min. - Cast IronNK 100-160/150 BA2F2AESBQQEIW3
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£6,138.00 RRP £4,296.60 £3,580.50
6 week lead time
Free Standard Delivery
-
98973351
Grundfos - NK 100-160/169BA2F2AESBQQEFW5 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1199 Ltr/min. - Cast IronNK 100-160/169 BA2F2AESBQQEFW5
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£6,922.80 RRP £4,845.96 £4,038.30
6 week lead time
Free Standard Delivery
-
98973408
Grundfos - NK 100-160/169BA2F2AESBQQEJW3 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1964 Ltr/min. - Cast IronNK 100-160/169 BA2F2AESBQQEJW3
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£6,357.60 RRP £4,450.32 £3,708.60
6 week lead time
Free Standard Delivery
-
98973349
Grundfos - NK 100-160/176BA2F2AESBQQEGW5 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1382 Ltr/min. - Cast IronNK 100-160/176 BA2F2AESBQQEGW5
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£7,035.60 RRP £4,924.92 £4,104.10
6 week lead time
Free Standard Delivery
-
98973730
Grundfos - NK 100-160/176BA2F2AESBQQEKW3 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 2024 Ltr/min. - Cast IronNK 100-160/176 BA2F2AESBQQEKW3
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£6,692.40 RRP £4,684.68 £3,903.90
6 week lead time
Free Standard Delivery
-
98973513
Grundfos - NK 100-200/178AA2F2AESBQQEKW3 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 2258 Ltr/min. - Cast IronNK 100-200/177 AA2F2AESBQQEKW3
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£7,821.60 RRP £5,475.12 £4,562.60
6 week lead time
Free Standard Delivery
-
98972409
Grundfos - NK 100-200/182AA2F2AESBQQEGW5 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1453 Ltr/min. - Cast IronNK 100-200/182 AA2F2AESBQQEGW5
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£8,092.80 RRP £5,664.96 £4,720.80
6 week lead time
Free Standard Delivery
-
98972410
Grundfos - NK 100-200/193AA2F2AESBQQEHW5 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1576 Ltr/min. - Cast IronNK 100-200/193 AA2F2AESBQQEHW5
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£8,299.20 RRP £5,809.44 £4,841.20
6 week lead time
Free Standard Delivery
-
98973515
Grundfos - NK 100-200/195AA2F2AESBQQELW3 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 2463 Ltr/min. - Cast IronNK 100-200/195 AA2F2AESBQQELW3
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£8,655.60 RRP £6,058.92 £5,049.10
6 week lead time
Free Standard Delivery
-
98972412
Grundfos - NK 100-200/214AA2F2AESBQQEIW5 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1834 Ltr/min. - Cast IronNK 100-200/214 AA2F2AESBQQEIW5
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£8,558.40 RRP £5,990.88 £4,992.40
6 week lead time
Free Standard Delivery
-
98972414
Grundfos - NK 100-200/219AA2F2AESBQQEJW5 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 2024 Ltr/min. - Cast IronNK 100-200/219 AA2F2AESBQQEJW5
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£9,427.20 RRP £6,599.04 £5,499.20
6 week lead time
Free Standard Delivery
-
98973202
Grundfos - NK 100-250/216BA2F2AESBQQEIW5 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1629 Ltr/min. - Cast IronNK 100-250/216 BA2F2AESBQQEIW5
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£8,974.80 RRP £6,282.36 £5,235.30
6 week lead time
Free Standard Delivery
-
98973200
Grundfos - NK 100-250/236BA2F2AESBQQEJW5 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1774 Ltr/min. - Cast IronNK 100-250/236 BA2F2AESBQQEJW5
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£9,817.20 RRP £6,872.04 £5,726.70
6 week lead time
Free Standard Delivery
-
98973198
Grundfos - NK 100-250/260BA2F2AESBQQEKW5 Long Coupled Single Stage End Suction Pump - 400V - Three Phase -1854 Ltr/min. - Cast IronNK 100-250/260 BA2F2AESBQQEKW5
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£9,855.60 RRP £6,898.92 £5,749.10
6 week lead time
Free Standard Delivery
-
98973196
Grundfos - NK 100-250/274BA2F2AESBQQELW5 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1983 Ltr/min. - Cast IronNK 100-250/274 BA2F2AESBQQELW5
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£10,851.60 RRP £7,596.12 £6,330.10
6 week lead time
Free Standard Delivery
End Suction Pumps
End suction pumps are a simple and versatile type of centrifugal pump that are widely used anywhere a dependable flow of water or liquid is needed. Compact and cost-effective, they’re built around a single impeller that draws liquid in from one side and discharges it from the top, making them easy to install and maintain.
You’ll find end suction pumps across countless applications, from heating and cooling systems to irrigation, water transfer, and general pressure boosting. They’re designed to handle everything from clean water to light industrial liquids, offering reliable performance with minimal maintenance.
At Pumpify, we supply an extensive range of end suction pumps from leading brands, including Calpeda, Ebara, Grundfos, Lowara, and more. Whether you’re replacing an existing unit or designing a new system, our selection covers close-coupled and frame-mounted models to suit both domestic and commercial use.