By Range
-
The Calpeda MXH series is a compact, horizontal ...
-
Calpeda MXHM pumps take the MXH design further, ...
-
The Calpeda NM range is all about simplicity an ...
-
The Ebara 2CDX range is built for when you need ...
-
Compact, efficient, and tough. The EBARA 2CDXM ...
-
The Ebara 3M ra ...
-
The Ebara GS r ...
-
The Ebara CD range is your go-to for reliable, ...
-
The Ebara CDM range takes the CD series up a no ...
-
The Ebara CDX range is designed for high-demand ...
-
Compact, horizontal, multistage end-suction pum ...
-
The CME series takes the CM design and adds eve ...
-
Single-stage, horizontal end-suction pumps desi ...
-
The NBE pumps are NB siblings with extended per ...
-
NK pumps are single-stage, horizontal end-sucti ...
-
The NKE series builds on the NK with stainless ...
-
The Lowara BGM ...
Featured End Suction Pumps
Browse the featured products, hand picked by the Pump Sales Direct Team
-
98972891
Grundfos - NK 100-315/284AA2F2AESBQQE2W1 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 5337 Ltr/min. - Cast IronNK 100-315/284 AA2F2AESBQQE2W1
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£43,320.00 RRP £30,324.00 £25,270.00
6 week lead time
Free Standard Delivery
-
98972877
Grundfos - NK 80-315/278AA2F2AESBQQEWW1 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 3701 Ltr/min. - Cast IronNK 80-315/278 AA2F2AESBQQEWW1
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating
£29,372.40 RRP £20,560.68 £17,133.90
6 week lead time
Free Standard Delivery
-
XY-104604831
Lowara - 10HM05S22T5RVBE (e-HM) Stainless Steel Horizontal Multi-Stage Pump - 400V - 3 Phase - 234 Ltr/min - 106.3m HeadSilent Operation:
High efficiency and thick sheet metal pump body reduces the noise of water circulating inside the pump. This product is manufactured by Lowara. Lower speeds on a speed - controlled pump also mean near silent running without compromising on demand or performance.
No Water Hammer:
Water hammer is the 'bang' sound in the pipes when a pump stops suddenly. A speed-controlled pump stops slowly eliminating 'water hammer' noise while preserving the system.
Stable Temperature:
In an on/off system the cold water is stored in a tank and is slowly heated to the room temperature. In constant pressure systems, fresh cold water is pumped into the system as soon as you open a tap, keeping the water at your desired temperature at all times.
Energy Saving:
A pump uses most energy when it's at full speed. Less speed means less energy. The relationship between changes in speed and changes in head, flow and power consumption comes under the affinity law. If you reduce the speed by 50%, power
The Lowara 10HM05S22T5RVBE (e-HM) Stainless Steel Horizontal Multi-Stage Pump - 400v - 3 Phase is a Multistage pump. Voltage for this item is 400V. It has an actual flow rate of 234 Ltr/min. The maximum head for this pump is 106.3m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.
£2,168.40 RRP £1,517.88 £1,264.90
In stock
Free Standard Delivery
-
98395145
Grundfos - CME 1-8-G A R G E AQQE Horizontal Multi-Stage Booster Pump 415V - Stainless SteelCME 1-8 A-R-G-E-AQQE S-A-D-N
space-efficient, dependable, horizontal, multi-stage, end-suction centrifugal pump unit with axial suction port and radial discharge port. Pump materials in contact with the liquid are in high-grade Stainless Steel. The mechanical shaft seal is a specially engineered, unbalanced O-ring seal. All pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1). The pump is equipped with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:
Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections:- "Alarm": Motor has stopped (flashing red indicator lights)
- "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
- "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
- interface for Grundfos CIM fieldbus module
- GENIbus connection
- two signal-relay outputs (potential-free contacts)
- 24 V voltage supply for sensors
- Grundfos Digital Sensor input and output
- one configurable digital input or open-collector output
- 5 V voltage supply to potentiometer and sensor
- two analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 - 3.5 V
- one dedicated digital input
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, Domestic water pressure boosting, Industrial cleaning process, Industrial heating, Industrial water supply and transfer, Desalination, Water distribution, Irrigation, Community water supply
£3,072.00 RRP £2,150.40 £1,792.00
In stock
Free Standard Delivery
-
98395148
Grundfos - CME 1-8-I A R I E AQQE Horizontal Multi-Stage Booster Pump 415V - Stainless SteelCME 1-8 A-R-I-E-AQQE S-A-D-N
space-efficient, dependable, horizontal, multi-stage, end-suction centrifugal pump unit with axial suction port and radial discharge port. Pump materials in contact with the liquid are in Stainless Steel. The mechanical shaft seal is a specially engineered, unbalanced O-ring seal. All pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1). The pump is equipped with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:
Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections:- "Alarm": Motor has stopped (flashing red indicator lights)
- "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
- "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
- interface for Grundfos CIM fieldbus module
- GENIbus connection
- two signal-relay outputs (potential-free contacts)
- 24 V voltage supply for sensors
- Grundfos Digital Sensor input and output
- one configurable digital input or open-collector output
- 5 V voltage supply to potentiometer and sensor
- two analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 - 3.5 V
- one dedicated digital input
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, Domestic water pressure boosting, Industrial cleaning process, Industrial heating, Industrial water supply and transfer, Desalination, Water distribution, Irrigation, Community water supply
£2,785.20 RRP £1,949.64 £1,624.70
In stock
Free Standard Delivery
-
98396708
Grundfos - CME 3-8-I A R I E AQQE Horizontal Multi-Stage Booster Pump 415V - Stainless SteelCME 3-8 A-R-I-E-AQQE S-A-D-N
space-efficient, dependable, horizontal, multi-stage, end-suction centrifugal pump unit with axial suction port and radial discharge port. Pump materials in contact with the liquid are in Stainless Steel. The mechanical shaft seal is a specially engineered, unbalanced O-ring seal. All pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1). The pump is equipped with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:
Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections:- "Alarm": Motor has stopped (flashing red indicator lights)
- "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
- "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
- interface for Grundfos CIM fieldbus module
- GENIbus connection
- two signal-relay outputs (potential-free contacts)
- 24 V voltage supply for sensors
- Grundfos Digital Sensor input and output
- one configurable digital input or open-collector output
- 5 V voltage supply to potentiometer and sensor
- two analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 - 3.5 V
- one dedicated digital input
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, Domestic water pressure boosting, Industrial cleaning process, Industrial heating, Industrial water supply and transfer, Desalination, Water distribution, Irrigation, Community water supply
£3,607.20 RRP £2,525.04 £2,104.20
In stock
Free Standard Delivery
End Suction Pumps
End suction pumps are a simple and versatile type of centrifugal pump that are widely used anywhere a dependable flow of water or liquid is needed. Compact and cost-effective, they’re built around a single impeller that draws liquid in from one side and discharges it from the top, making them easy to install and maintain.
You’ll find end suction pumps across countless applications, from heating and cooling systems to irrigation, water transfer, and general pressure boosting. They’re designed to handle everything from clean water to light industrial liquids, offering reliable performance with minimal maintenance.
At Pumpify, we supply an extensive range of end suction pumps from leading brands, including Calpeda, Ebara, Grundfos, Lowara, and more. Whether you’re replacing an existing unit or designing a new system, our selection covers close-coupled and frame-mounted models to suit both domestic and commercial use.