The Clarke - Hippo 2 Domestic - Submersible Pump - 110V Clarke Hippo 2 Domestic Submersible Pump - 110V is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - Hippo 2 Domestic - Submersible Pump - 230V Clarke Hippo 2 Domestic Submersible Pump - 230V is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - PSP125B Puddle Pump - With Auto Sensor 230V Clarke PSP125B Puddle Pump - With Auto Sensor 230v is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - PSV5A - Submersible Pump - With integrated Float Switch - 230V

Clarke submersible pump with selectable manual or auto mode. In auto integrated float switch automatically turns the pump off when water level drops.

This Clarke submersible pump will pump solids of up to 30mm diameter.

The Clarke PSV5A is used in many draining applications including pits, sumps, ditches, footings etc.

The Clarke - CSE2 - Submersible Pump - No Float - 230V

This self-priming pump can be utilised for continuous running and provides top quality general duty for clear water pumping. The strong, durable, double insulated case offers a tough corrosion and rust proof construction.

This Clarke pump also benefits form a low consumption drive with overload protection and an anti-airlock valve, complete with a extended life ceramic shaft for reliability.

The Clarke - PW50A Petrol Powered Water Pump

This mobile and lightweight petrol powered pump from Clarke is ideal for draining pits, pools, trenches, foundations and irrigation.

The Clarke - EPC800 Electronic Water Pump Control Unit - 230V

EPC800 Electronic Water Pump Control Unit. In-line electronic device maintains water pressure from booster pumps by instantly sensing water usage & automatically starting or stopping the pump.

The Clarke - CWP200 - Submersible Clean Water Pump - 230V

A domestic subermersible pump from Clarke, one of the UK's leading domestic pump suppliers.

This pump is ideal for clean water only and comes with 1¼", 1" and ¾" tube adaptor and 10m waterproof cable.

The Clarke - CWBP300 ¾" 400W 36 Ltr/min. 11m Head Water Butt Pump (230V)

This water pump delivers a simple means to extract water from butts and can be utilised with chlorinated swimming reservoir water. An ideal garden tool the CWBP300 can be adjusted in length for use with butts of different sizes and its 3/4'' BSP threaded outlet has a quick fit hose connection. Completing this tool is a dependable build and a powerful 400W for optimum operation.

The Clarke - BIP1000 1" 383W 40Lpm 35m Head Water Pump (230V)

This general duty electric water pump is suitable for a wide range of uses including use in wells, farming, garden spraying and more. Powered by a 383 Watt 1 Phase drive, this compact yet effective pump can pump a maximum of 40 Ltrs of water per minute and boasts an impressive 35 metre maximum head, perfect for low to medium duty applications.

The Clarke - BIP1500 1" 800W 45Lpm 50m Head Water Pump (230V)

1" Electric Water Pump Versatile pump Suitable for use in the home or garden as well as commercial and agricultural applications. (Not self-priming)

The Clarke - PW80A 3¢¢š Petrol Powered Water Pump

This mobile and lightweight petrol powered pump from Clarke is ideal for draining pits, pools, trenches, foundations and irrigation.

The Tsurumi - TE2-25H is a compact, self-priming centrifugal water Pump - 18-20-1022 designed for efficient water management across various Uses. This versatile pump is powered by a reliable Honda petrol engine, making it ideal for use in locations without access to electrical power. Its robust construction and high dynamic performance make it suitable for a wide range of tasks in environments like construction, agriculture, and emergencies.

TE-H(A) are self-priming, centrifugal pumps manufactured by Tsurumi - and powered by Honda 4-stroke, recoil start, petrol engines. 

TEM-25H and TE2-25H models feature engines with a rotary slinger lubrication device, to prevent damage from inadequate lubrication during use at an angle. Both models have easy-carry handles and rubber feet on the base stand, for engine noise and vibration absorption. Capable of high heads, they are good for irrigation and dust suppression, but with being light and compact they are also useful for general drainage, transfer and flood defence. They will pump clean and dirty water.

TET2-50HA, TE4-80HA and TE2-100HA have the Oil Alert engine protection system fitted to prevent damage from inadequate lubrication during use with low oil, or while at an angle. All models have easy-carry frames and rubber feet, for engine noise and vibration absorption. Capable of pumping large volumes of clean and dirty water they are good for site drainage, land drainage, transfer and flood defence. To assist manual handling of the model TE2-100HA, a two wheeled site trolley is available as an optional extra. 

Residue pumping kit: engine pumps, with their traditional strainers, will always leave a few inches deep of water behind when pumping off a flat surface. For use with the TEM-25H and TE2-25H, this kit will enable the pumping of water levels down to 3mm and the floor tool can be moved from puddle to puddle while the engine is still running. Suction lift is up to 6 metres, but 4 metres is recommended. The tool is 140mm wide and the kit comprises a floor tool (with an integral strainer) and a 4 metre suction hose.

Engine and dynamic performance

The TE2-25H is equipped with a Honda 4-stroke petrol engine, providing 1.1 HP of power. This engine ensures reliable operation and easy starting, even in challenging conditions. The pump's self-priming capability allows it to quickly begin operation without the need for manual priming.

Pumping Capacity

This model features a 1-inch discharge port, enabling it to handle a significant volume of water. It is designed for pumping both clean and dirty water, making it versatile for various Uses such as site drainage, flood defence, and irrigation.

Construction and Durability

Built with durability in mind, the TE2-25H is constructed to withstand the rigours of demanding work environments. Its compact design allows for easy transportation and storage while still delivering powerful dynamic performance.

Uses

The pump excels in a variety of scenarios, including:

• Construction site dewatering
• Agricultural irrigation
• Flood control and emergency water removal
• General water transfer in remote locations

The Tsurumi - TE2-25H Petrol Powered Water Pump under SKU 18-20-1022 offers a combination of portability, power, and reliability, making it an excellent choice for professionals and homeowners alike who require efficient water management solutions in areas without readily available electrical power.

The Tsurumi - TEM-25H Petrol Powered Water Pump - 18-20-1007 (SKU 18-20-1007) is a compact yet powerful self-priming centrifugal pump designed for versatile water management Uses. Manufactured by industry-leading experts at Tsurumi - Pump, this portable unit combines efficiency, durability, and ease of use in a lightweight package.

TE-H(A) are self-priming, centrifugal pumps manufactured by Tsurumi - and powered by Honda 4-stroke, recoil start, petrol engines. 

TEM-25H and TE2-25H models feature engines with a rotary slinger lubrication device, to prevent damage from inadequate lubrication during use at an angle. Both models have easy-carry handles and rubber feet on the base stand, for engine noise and vibration absorption. Capable of high heads, they are good for irrigation and dust suppression, but with being light and compact they are also useful for general drainage, transfer and flood defence. They will pump clean and dirty water.

TET2-50HA, TE4-80HA and TE2-100HA have the Oil Alert engine protection system fitted to prevent damage from inadequate lubrication during use with low oil, or while at an angle. All models have easy-carry frames and rubber feet, for engine noise and vibration absorption. Capable of pumping large volumes of clean and dirty water they are good for site drainage, land drainage, transfer and flood defence. To assist manual handling of the model TE2-100HA, a two wheeled site trolley is available as an optional extra. 

Residue pumping kit: engine pumps, with their traditional strainers, will always leave a few inches deep of water behind when pumping off a flat surface. For use with the TEM-25H and TE2-25H, this kit will enable the pumping of water levels down to 3mm and the floor tool can be moved from puddle to puddle while the engine is still running. Suction lift is up to 6 metres, but 4 metres is recommended. The tool is 140mm wide and the kit comprises a floor tool (with an integral strainer) and a 4 metre suction hose.

Construction and Design

• Aluminium construction for pump end, body, volute, and impeller
• Lightweight at only 5kg for excellent portability
• Sturdy base plate with rubber feet for anti-vibration
• Comfortable carry handle for easy transport

Engine and dynamic performance

• Powered by a 4-stroke Honda GX25 petrol engine (1.5 HP)
• Maximum flow rate of 140 litres per minute
• Impressive 40 metres head (4 bar. pressure)
• Recommended maximum suction lift of 6 metres with a foot-valve strainer

Specifications

• 1-inch (25mm) inlet and outlet
• Capable of handling particles up to 5mm in size
• Dimensions: 215mm (W) x 340mm (L) x 270mm (H)

Reliability and Versatility

• Carbon ceramic mechanical seal for enhanced reliability
• Suitable for both clean and slightly dirty water Uses
• Ideal for irrigation, sprinkling, washing down, and general dewatering tasks

The Tsurumi - TEM-25H comes complete with hose couplings, washers, hose clips, and a strainer, providing a comprehensive solution for various water pumping needs.

The Tsurumi - TET2-50HA is a versatile and powerful petrol-powered water Pump - 18-20-1018 designed for various Uses in environments like construction, agriculture, and flood defence. This compact and efficient pump offers reliable dynamic performance for handling both clean and dirty water in site drainage, irrigation, and other water transfer needs.

TE-H(A) are self-priming, centrifugal pumps manufactured by Tsurumi - and powered by Honda 4-stroke, recoil start, petrol engines. 

TEM-25H and TE2-25H models feature engines with a rotary slinger lubrication device, to prevent damage from inadequate lubrication during use at an angle. Both models have easy-carry handles and rubber feet on the base stand, for engine noise and vibration absorption. Capable of high heads, they are good for irrigation and dust suppression, but with being light and compact they are also useful for general drainage, transfer and flood defence. They will pump clean and dirty water.

TET2-50HA, TE4-80HA and TE2-100HA have the Oil Alert engine protection system fitted to prevent damage from inadequate lubrication during use with low oil, or while at an angle. All models have easy-carry frames and rubber feet, for engine noise and vibration absorption. Capable of pumping large volumes of clean and dirty water they are good for site drainage, land drainage, transfer and flood defence. To assist manual handling of the model TE2-100HA, a two wheeled site trolley is available as an optional extra. 

Residue pumping kit: engine pumps, with their traditional strainers, will always leave a few inches deep of water behind when pumping off a flat surface. For use with the TEM-25H and TE2-25H, this kit will enable the pumping of water levels down to 3mm and the floor tool can be moved from puddle to puddle while the engine is still running. Suction lift is up to 6 metres, but 4 metres is recommended. The tool is 140mm wide and the kit comprises a floor tool (with an integral strainer) and a 4 metre suction hose.

Engine and dynamic performance

• Model: TET2-50HA
• Engine: GX120 Honda petrol engine
• Horsepower: 4 HP
• Fuel Type: Petrol
• Oil Alert System: Yes

Pump Characteristics

• Inlet/Outlet Diameter: 50 mm (2 inches)
• Maximum Flow Rate: 520 litres per minute
• Maximum Head: 32 metres
• Solids Handling Capacity: Up to 6 mm

Physical Attributes

• Dimensions (W x L x H): 356 x 470 x 350 mm
• Dry Weight: 22.0 kg

• Self-Priming Design: Enables quick and easy start-up, ideal for various pumping scenarios
• Centrifugal Pump Technology: Ensures efficient water movement and reliable dynamic performance
• Portable Construction: The compact size and relatively light weight make it easy to transport and position on job sites
• Versatile Uses: Suitable for draining pits, pools, trenches, and other water management tasks
• Durable Build: Constructed to withstand the demands of construction and industrial environments

The Tsurumi - TET2-50HA combines power, portability, and reliability, making it an excellent choice for professionals in need of an efficient water-pumping solution.

The Clarke - EPC2200 Booster Pump Electronic Control Unit - 1.1KW - 230V

The EPC2200 Electronic Control Unit is an in-line electronic device engineered to be used with booster pumps in order to maintain water pressure from the pumps by instantly sensing water usage & automatically starting the pump depending on demand. It is also able to sense when no water is available for the pump, cutting it out and preventing dry running which will damage the booster pump. The ECU benefits from an self-activating mode that turns on the pump when water is needed and when operating, an LED illuminates to inform the user of the pumps operation.

However, when there is no water available for the booster pump, a failure LED flashes, alerting the user of a fault within the system.A manual mode is also offered by the ECU, which will start or stop the booster pump based on pressures within the system. This setting can be set in increments, so that the pump is switched on when water pressure falls below a minimum level and cutting it out when it reaches beyond the maximum pressure as stipulated by the user. The manual setting also benefits from a wider pressure range, from 0.5Bar to 6Bar.The ECU also features a digital display which displays in real-time the pressure within the system, helping to identify if there is an issue with pressure being too elevated or low.