The Home Booster unit incorporates an integrated 200 litre storage tank, providing a usable capacity of 180 litres and complete with a Type AB air gap in full compliance with Water Byelaws regulations. This design ensures secure separation from the mains supply while maintaining a reliable and protected water reserve.

A high-grade Stainless Steel pump is fitted as standard, delivering efficient performance, consistent pressure, extended service life and low-noise operation. For properties with increased demand, or where incoming mains pressure results in slow tank replenishment, an additional 180 litre slave storage tank can be specified to expand overall capacity and improve system resilience.

Supplied with a 2 Year Warranty.

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.

Engineered for sealed systems, the Flexfiller combines an electronic pressure transducer with a user-friendly microprocessor to maintain minimum system pressure with precision.

Floor-standing with an 18 Ltrs internal break tank, it delivers top-up flow rates up to 18 L/min. Ideal for commercial, industrial and large domestic applications, Flexfiller is available in single or twin-pump configurations.

• Digital control with electronic pressure transducer
• 18 Ltrs break tank; up to 18 L/min top-up
• MODBUS RTU integration; password-protected access
• Category 5 protection (AB weir overflow)

Guide system volume up to 300,000 Ltrs. Black enclosure (RAL 9005). Power options: 230V 50Hz 1ph or (2160D) 415V 50Hz 3ph.

SOLOLIFT2 WC-1

Sololift2 WC-1 is a small, space-efficient self-operating lifting station appropriate for pumping of wastewater in private dwellings in places where wastewater cannot be led directly to the sewer by means of a natural downward slope.

Sololift2 WC-1 is appropriate for pumping wastewater from a toilet containing toilet paper and faeces with an additional connection on the lid for, for example, a washbasin.

The pumping of liquids containing other material may cause faults and limit the scope of our guarantee.

Sololift2 WC-1 is typically used to dewater:

The space-efficient lifting station is equipped with:

Design according to EN12050-3 and production inspection by external institute with unique features focused on quick installation, long-lasting operation and straightforward-clean service.

Suitable for: Domestic wastewater

SOLOLIFT2 WC-3

Sololift2 WC-3 is a small, space-efficient self-operating lifting station appropriate for pumping of wastewater in private dwellings in places where wastewater cannot be led directly to the sewer by means of a natural downward slope.

Sololift2 WC-3 is appropriate for pumping wastewater from a toilet containing toilet paper and faeces with additional connections on the lid and to the sides of the tank for, for example, washbasin, shower or bidet.

The pumping of liquids containing other material may cause faults and limit the scope of guarantee.

Sololift2 WC-3 is typically used to dewater:

Extremely low switching levels for the lowest construction heights, which can be an advantage in case of connection of a shower receptor.

The space-efficient lifting station is equipped with:

Design according to EN12050-3 and production inspection by external institute with unique features focused on quick installation, long-lasting operation and straightforward-clean service.

Suitable for: Domestic wastewater

SOLOLIFT2 CWC-3

Sololift2 CWC-3 is a small, space-efficient self-operating lifting station appropriate for pumping of wastewater off places in private dwellings where wastewater cannot be led directly to the sewer by means of a natural downward slope. Sololift2 CWC-3 is typically used for:

Design according to EN12050-3 and production inspection by external institute with unique features focused on quick installation, long lasting operation and straightforward clean service.

Suitable for: Domestic wastewater

SOLOLIFT2 C-3

Sololift2 C-3 is a small, space-efficient self-operating lifting station appropriate for pumping of grey water (without faeces) in private dwellings in places where wastewater cannot be led directly to the sewer by means of a natural downward slope.

Sololift2 C-3 is typically used for:

Sololift2 C-3 is appropriate for installation under a washbasin or particularly for confined space conditions in front wall structures and built-in cabinets. Extremely low switching levels for the lowest construction heights, which can be an advantage in case of connection of a shower receptor.

The space-efficient lifting station is equipped with:

Design according to EN12050-2 and production inspection by external institute with unique features focused on quick installation, long-lasting operation and straightforward clean service.

Suitable for: Domestic wastewater

SOLOLIFT2 D-2

Sololift2 D-2 is a small, space-efficient self-operating lifting station appropriate for pumping of wastewater off places in private dwellings where greywater (w/o faeces) cannot be led directly to the sewer by means of a natural downward slope.

Sololift2 D-2 is typically used for:

Sololift2 D-2 is appropriate for confined space conditions in built-in cabinets or also below shower receptors or pedestals.

The pumping of liquids containing other material may cause faults and limit the scope of our guarantee.

The space-efficient lifting station is equipped with

Design according to EN12050-2 and production inspection by external institute with unique features focused on quick installation, long lasting operation and straightforward clean service.

Suitable for: Domestic wastewater

The Home Booster unit incorporates an integrated 200 litre storage tank, providing a usable capacity of 180 litres and complete with a Type AB air gap in full compliance with Water Byelaws regulations. This design ensures secure separation from the mains supply while maintaining a reliable and protected water reserve.

A high-grade Stainless Steel pump is fitted as standard, delivering efficient performance, consistent pressure, extended service life and low-noise operation. For properties with increased demand, or where incoming mains pressure results in slow tank replenishment, an additional 180 litre slave storage tank can be specified to expand overall capacity and improve system resilience.

Supplied with a 2 Year Warranty.

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.

The Grundfos Home Booster is a self-contained cold-water Booster Set is specifically developed to be used in properties or buildings where the existing mains water supply is insufficient to meet the standard pressurised hot and cold-water system demands.

For a slightly higher demand, or where the storage tank refills very slowly due to poor mains water pressure.

This product is the 180 litre extra storage tank for the home booster unit.

The Grundfos Home Booster sets can be used in conjunction with a 180L Slave Tank for applications requiring additional water supply.

The Slave Tank is compatible with the 3.0 Bar.

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.

Integrated Booster Setup

Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution.
These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure.

The iBOOST F200 features simple to operate fixed speed controls and is capable of generating pressures of up to 4.5 bar. and flow rates of up to 100 litres per minute, typically operating at 60 litres per minute at 3.0 bar. pressure.