The Clarke - Hippo 2 Domestic - Submersible Pump - 110V Clarke Hippo 2 Domestic Submersible Pump - 110V is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - Hippo 2 Domestic - Submersible Pump - 230V Clarke Hippo 2 Domestic Submersible Pump - 230V is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - Hippo 2A - Submersible Pump - With Float Switch Clarke Hippo 2A Submersible Pump - With Float Switch is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - CSE400A - Submersible Pump - 230V Clarke CSE400A Submersible Pump - 230v is a robust and dependable submersible pump, engineered with power and efficiency in mind.

The Clarke - SPE800 Self Priming Pump - 1 inch - 230V Clarke SPE800 Self Priming Pump - 1 inch - 230V is a robust and dependable selfpriming pump, engineered with power and efficiency in mind.

The Clarke - PSP105 Puddle Pump - 230V

The Clarke - Hippo 5A 750W - Submersible Pump - 230V

Elevated power (750W) efficient submersible water pump with float switch. Benefiting from a large 208 Ltrs per minute output and on/off float switch that can be set to operate or be turned off, for continuous duty. This submersible water pump is perfect for draining and transferring liquid in many different domestic situations. Examples of use include draining cellars and basements, flooded boats, pits, pools etc. It could also be used with the float switch disabled to drain blocked sinks or baths.

RSD 150 Puddle Buddy low level drainage pump. The RSD 150 Pump is an all round semi professional and highly portable residue pump designed for clean water in domestic applications such as rooms, garages and cellars. It requires only a shallow water

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1233 (SKU 10-10-1233) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC1.4S
• Voltage: 230V
• Power: 0.48 kW
• Maximum Flow Rate: 170 litres per minute
• Maximum Head: 11 metres
• Outlet Diameter: 25mm (1 inch)
• Dimensions: 196mm diameter x 385mm height
• Dry Weight: 12 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC1.4S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1186 (SKU 10-10-1186) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 110V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC1.4S
• Voltage: 110V
• Power: 0.48 kW
• Maximum Flow Rate: 170 litres per minute
• Maximum Head: 11 metres
• Outlet Diameter: 25mm (1 inch)
• Dimensions: 196mm diameter x 385mm height
• Dry Weight: 12 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC1.4S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1024 (SKU 10-10-1024) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 110V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC1.4S
• Voltage: 110V
• Power: 0.48 kW
• Maximum Flow Rate: 170 litres per minute
• Maximum Head: 11 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 385mm height
• Dry Weight: 12 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC1.4S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1256 (SKU 10-10-1256) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC1.4S
• Voltage: 230V
• Power: 0.48 kW
• Maximum Flow Rate: 170 litres per minute
• Maximum Head: 11 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 385mm height
• Dry Weight: 12 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC1.4S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC2.75S Puddle Pump - 10-10-1019 (SKU 10-10-1019) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC2.75S
• Voltage: 230V
• Power: 0.75 kW
• Maximum Flow Rate: 230 litres per minute
• Maximum Head: 15 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 438mm height
• Dry Weight: 15.2 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC2.75S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

RSD400 Puddle Buddy low level drainage pump. The RSD 150 Pump is an all round semi professional and highly portable residue pump designed for clean water in domestic applications such as rooms, garages and cellars. It requires only a shallow water

RSD400 Puddle Buddy low level drainage pump. The RSD 150 Pump is an all round semi professional and highly portable residue pump designed for clean water in domestic applications such as rooms, garages and cellars. It requires only a shallow water