Note: The above unit cannot be connected directly to a water company water supply; it must be fed by a break tank to adhere to U.K water by-laws.

3 Year Warranty

The DAB ESYBOX Electronic Water Pressure System - 230V is a Pressurisation Unit item. This product is manufactured by Dab. Voltage for this item is 230V. It has an actual flow rate of 120 Ltr/min. The maximum head for this pump is 65m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The operating pressure of this is 8 Bar.

The Lowara Presfix Beta 180 Single Pump Pressurisation Unit - 8 bar. - 230v - Single Phase is a Pressurisation Unit item. This product is manufactured by Lowara. Voltage for this item is 230V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Presfix pressurisation units are developed to replace water that has been lost through system leakage and to maintain the system design fill pressure in sealed heating and chilled water systems in accordance with BS7074 parts 1, 2 and 3.

Presfix units also provide safety circuits locking out the boiler / chiller in the advent of high/ low pressures occurring.

Expanded water is accommodated in membrane vessel/s that are supplied separately and normally installed alongside the Presfix unit.

Presfix units are perfect for either domestic or industrial environments.

Three levels of sophistication are offered along with two pressure ranges for the Mini Presfix and single range for Micro Presfix units.

The operating pressure of this is 8 bar.

The Lowara Presfix Beta 280 Twin Pump Pressurisation Unit - 8 bar. - 230v - Single Phase is a Pressurisation Unit item. This product is manufactured by Lowara. Voltage for this item is 230V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Presfix pressurisation units are developed to replace water that has been lost through system leakage and to maintain the system design fill pressure in sealed heating and chilled water systems in accordance with BS7074 parts 1, 2 and 3.

Presfix units also provide safety circuits locking out the boiler / chiller in the advent of high/ low pressures occurring.

Expanded water is accommodated in membrane vessel/s that are supplied separately and normally installed alongside the Presfix unit.

Presfix units are perfect for either domestic or industrial environments.

Three levels of sophistication are offered along with two pressure ranges for the Mini Presfix and single range for Micro Presfix units.

The operating pressure of this is 8 bar.

Purpose-built for sealed systems, the FLAMCO – Pro PU 181 is a compact, wall-mounted digital pressurisation unit that uses an electronic pressure transducer and microprocessor control to maintain stable system pressure.

Delivering top-up flow rates up to 12 L/min via a 4 Ltrs internal break tank, it suits commercial, industrial and large domestic applications. The Pro PUm range supports single or twin-pump configurations and is tuned for quick installation and commissioning.

• 0.1 Bar pressure-set increments; max 8 Bar
• MODBUS RTU communications; password-protected access
• Dry-run protection and flood-protection routines
• Service reminder after 12 months

Finished in grey (RAL 7016) and powered from 230V 50Hz 1ph, the unit features bi-directional menus, system fill mode and detailed event logging for hassle-free operation.

Designed for high-volume sealed systems, the FLAMCO Pro PU 281 is a floor-standing digital pressurisation unit using an electronic pressure transducer and microprocessor control to keep system pressure stable and safe.

Delivering top-up flow rates up to 18 L/min via an 18 Ltrs internal break tank, it suits commercial, industrial and large domestic applications. Available in single or twin-pump configurations for sealed LPHW/CHW systems (guide volume up to 300,000 Ltrs).

• Pressure setting in 0.1 Bar increments (max 8 Bar)
• MODBUS RTU communications; password-protected access; bi-directional menu
• Service reminder after 12 months; system fill mode
• Dry-run, anti-seize routine and flood-protection functions

Finished in grey (RAL 7016) and powered from 230V 50Hz 1ph, the Pro PU logs events and offers extensive volt-free contacts for BMS integration.

Built for reliable sealed-system top-up, the Flamco Flexfiller 180D is a floor-standing digital pressurisation unit using an electronic pressure transducer and microprocessor control to maintain minimum system pressure with precision.

Buy Flamco Flexfillers from Pumpify and receive free standard delivery.

It delivers up to 18 L/min top-up via an 18 Ltrs internal break tank and suits commercial, industrial and large domestic installations. Available in single or twin-pump configurations for sealed LPHW/CHW systems (guide volume up to 300,000 Ltrs).

• Digital control with electronic pressure transducer
• 18 Ltrs break tank; up to 18 L/min top-up
• MODBUS RTU communications; password-protected access
• Fluid Protection Category 5 (Type AB weir overflow)

Finished in black (RAL 9005) with a sequential programming menu, system fill mode and 12-month on-screen service reminder for straightforward commissioning and operation.

Built for reliable sealed-system top-up, the Flamco Flexfiller 280D is a floor-standing digital pressurisation unit using an electronic pressure transducer and microprocessor control to maintain minimum system pressure with precision.

Buy Flamco Flexfillers from Pumpify and receive free standard delivery.

It delivers up to 18 L/min top-up via an 18 Ltrs internal break tank and suits commercial, industrial and large domestic installations. Available in single or twin-pump configurations for sealed LPHW/CHW systems (guide volume up to 300,000 Ltrs).

• Digital control with electronic pressure transducer
• 18 Ltrs break tank; up to 18 L/min top-up
• MODBUS RTU communications; password-protected access
• Fluid Protection Category 5 (Type AB weir overflow)

Finished in black (RAL 9005) with a sequential programming menu, system fill mode and 12-month on-screen service reminder for straightforward commissioning and operation.

Blending top-up pressurisation with on-demand chemical dosing, the Flamco PressDS 280D Twin Pump maintains stable pressure on sealed systems while automatically mixing inhibitor from a dedicated tank at a preset ratio.

This floor-standing unit features a 4 Ltrs mains-fed break tank and an 18 Ltrs additive reservoir. Each top-up delivers water and the correct fluid blend together, cutting site visits and maximising system protection. Ideal for commercial and industrial plant (guide volume up to 300,000 Ltrs).

• Dual pump duty/standby configuration
• Mix control user-set from 150%
• Top-up to < 18 L/min; max delivery 3 Bar
• Category 5 (Type AB weir overflow) protection

Integration is simple via MODBUS RTU, password-protected menus and volt-free contacts, with flood protection, service reminders and additive-empty alerts built in. Finished in black (RAL 9005).

Engineered for sealed systems, the FLAMCO Midi PSD 150D vacuum degasser (Pressure Step Degasser) strips dissolved gases to stabilise pressure and improve plant efficiency. Single pump.

Buy the Flamco PSD Degasser from Pumpify and recieve free standard delivery.

The unit samples system fluid, isolates it and applies a full vacuum so dissolved air is released per Henry's Law, vents this to atmosphere, then returns deaerated water to the circuit. A digital processor automates the cycle with a turbo mode for rapid commissioning and a real-time status display.

• Automatic vacuum deaeration with turbo & normal intervals
• Digital control and real-time component status
• Password-protected settings; 0.1 Bar pressure steps
• Event logging and volt-free common fault output

Suitable for commercial, industrial and residential LPHW/CHW applications. Model guide volume: up to 50,000 Ltrs (larger variants available up to 300,000 Ltrs).