The electric pumps of the Ebara JES - JE series are electric pumps in AISI 304 Stainless Steel.

These are self-priming pumps equipped with Venturi group (ejector and diffuser), which are easy to use and light thanks to their small size.

Constructively they have the pump body, the support, the seal bearing disc in AISI 304 steel.

They are equipped with an AISI 303 shaft (for the part in contact with the liquid).

The impellers are different depending on the model: for the JES electric pumps the impeller is in
PPO + PS reinforced with glass fibres, while for the JE the impeller is in AISI 304.

• Domestic pressurisation
• Pressure boosting in general
• Garden irrigation systems
• Vehicle washing
• Handling of clean water

The electric pumps of the Ebara JES - JE series are electric pumps in AISI 304 Stainless Steel.

These are self-priming pumps equipped with Venturi group (ejector and diffuser), which are easy to use and light thanks to their small size.

Constructively they have the pump body, the support, the seal bearing disc in AISI 304 steel.

They are equipped with an AISI 303 shaft (for the part in contact with the liquid).

The impellers are different depending on the model: for the JES electric pumps the impeller is in
PPO + PS reinforced with glass fibres, while for the JE the impeller is in AISI 304.

• Domestic pressurisation
• Pressure boosting in general
• Garden irrigation systems
• Vehicle washing
• Handling of clean water

The electric pumps of the Ebara JES - JE series are electric pumps in AISI 304 Stainless Steel.

These are self-priming pumps equipped with Venturi group (ejector and diffuser), which are easy to use and light thanks to their small size.

Constructively they have the pump body, the support, the seal bearing disc in AISI 304 steel.

They are equipped with an AISI 303 shaft (for the part in contact with the liquid).

The impellers are different depending on the model: for the JES electric pumps the impeller is in
PPO + PS reinforced with glass fibres, while for the JE the impeller is in AISI 304.

• Domestic pressurisation
• Pressure boosting in general
• Garden irrigation systems
• Vehicle washing
• Handling of clean water

Self priming electric pump with multi blade impeller, appropriate for pumping clean and dirty water. This product is manufactured by GMP. Trash duty and provided with an inspection door to remove any blockages that may occur.

A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.

Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from Cast Iron. Stainless Steel shaft. Silicon carbide mechanical seal.

The GMP B2KQA-ST EAR4 (HG2T-ST) Self-Priming Trash Pump - 400v - Three Phase - 440 Ltr/min. is a Self-Priming item. Voltage for this item is 400V. It has an actual flow rate of 440 Ltr/min. The maximum head for this pump is 15m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Self priming electric pump with multi blade impeller, appropriate for pumping clean and dirty water.

Trash duty and provided with an inspection door to remove any blockages that may occur. This product is manufactured by GMP.

A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.

Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from Cast Iron.

Stainless Steel shaft. Silicon carbide mechanical seal.

The GMP B3KQA-ST EAR6 (HG3T-ST) Self-Priming Trash Pump - 400v - Three Phase - 775 Ltr/min. is a Self-Priming item. Voltage for this item is 400V. It has an actual flow rate of 775 Ltr/min. The maximum head for this pump is 17m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Self priming electric pump with multi blade impeller, appropriate for pumping clean or slightly dirty water. This product is manufactured by GMP.

A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.

Maximum suction depth of 6 metres and a maximum liquid temperature of 60°C.

Pump casing, inlet flange and impeller are made from Cast Iron. Stainless Steel shaft. Carbon mechanical seal.

The GMP HG-1 415v B1½KQ-A Self-Priming Centrifugal Pump - 400v - Three Phase - 250 Ltr/min. is a Self-Priming item. Voltage for this item is 400V. It has an actual flow rate of 250 Ltr/min. The maximum head for this pump is 16m5. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Self priming electric pump with multi blade impeller, appropriate for pumping clean or slightly dirty water. This product is manufactured by GMP.

A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 60°C.

Pump casing, inlet flange and impeller are made from Cast Iron. Stainless Steel shaft. Carbon mechanical seal.

The GMP HG-2 415v B2KQ-A Self-Priming Trash Pump - 400v - Three Phase - 500 Ltr/min. is a Self-Priming item. Voltage for this item is 400V. It has an actual flow rate of 500 Ltr/min. The maximum head for this pump is 18m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Jet traditional Cast Iron self priming pumps mainly applied for water boosting systems, washing systems and garden irrigation. This product is manufactured by Nocchi. Cast iron pump bodies and motor brackets. Impeller, diffuser and venturi system made from technopolymer.

Jet 100-68/80 impeller made from brass. Clean water only with a maximum liquid temperature of 50°C. Maximum suction height of 7 metres with footvalve.

The Nocchi Jet 1000T 400V Self-Priming Centrifugal Pump - 400v - Three Phase - 70 Ltr/min. is a Self-Priming item. Voltage for this item is 400V. It has an actual flow rate of 70 Ltr/mi. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB EuroInox 40/80 is a multistage horizontal centrifugal pump that includes an extremely quite running, Making it appropriate for domestic use for water supply and water pressurization, Irrigation of gardens and vegetable gardens, and moving water in general.

Construction Includes Of The Pump

Pump body in Stainless Steel AISI 304. This product is manufactured by Dab. Motor support in die-cast aluminium, seal holder in AISI 304 steel. Mechanical seal in carbon/ceramic. Rotor shaft in AISI 304 steel. Rotors, diffuser bodies and diffusers in technopolymer. Adjustment rings in Stainless Steel.

Construction Features Of The Motor

Continuous service asynchronous motor.
Incorporated thermal current protection and permanently connected capacitor in the single-phase version.
The user must provide overload protection for the three-phase version.
Protection level of motor: IP 44
Protection level of terminal board: IP 55
Insulation class: F

The DAB EUROINOX 40/80 T-IE3 Centrifugal Multi-Stage Pump - 415v - Three Phase - 2001 Ltr/min. is a Centrifugal Pump item. Voltage for this item is 400V. It has an actual flow rate of 2001 Ltr/min. The maximum head for this pump is 72m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Self-priming centrifugal pumps, engineered for pressurization, gardening and irrigation activities and underground extraction (also from wells) and rainwater reuse in residential building service.

Mono CML is a progressing cavity pump series commonly selected for wastewater and general industrial applications requiring consistent flow (variant dependent).