The Tsurumi - LSC1.4S Puddle Pump - 10-10-1024 (SKU 10-10-1024) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 110V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC1.4S
• Voltage: 110V
• Power: 0.48 kW
• Maximum Flow Rate: 170 litres per minute
• Maximum Head: 11 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 385mm height
• Dry Weight: 12 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC1.4S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1256 (SKU 10-10-1256) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC1.4S
• Voltage: 230V
• Power: 0.48 kW
• Maximum Flow Rate: 170 litres per minute
• Maximum Head: 11 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 385mm height
• Dry Weight: 12 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC1.4S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC2.75S Puddle Pump - 10-10-1019 (SKU 10-10-1019) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This manual, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: LSC2.75S
• Voltage: 230V
• Power: 0.75 kW
• Maximum Flow Rate: 230 litres per minute
• Maximum Head: 15 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 438mm height
• Dry Weight: 15.2 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC2.75S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1144 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1144
• Voltage: 110V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1057 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1057
• Voltage: 110V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - LSC1.4S Puddle Pump - 10-10-1157 is a robust and efficient submersible pump designed for effective water removal in various Uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

• Model: Tsurumi - LSC1.4S
• Part Number: 10-10-1157
• Voltage: 230V
• Power: 0.48 kW
• Flow Rate: 170 litres per minute (L/min)
• Maximum Head: 11 metres
• Minimum Pumping Depth: Capable of pumping down to just 1mm, making it ideal for removing nuisance water from flat surfaces
• Free Passage: 6mm, allowing for the handling of small solids in suspension

• Automatic Sensor Switch: The pump includes an electronic float switch with Stainless Steel probes, encapsulated in impact-resistant rubber, suitable for both portable and fixed installations. The sensor allows for precise level control and can pump down to depths of 85mm or more depending on the sump size
• Durable Construction: The outer casing is made of pressed steel, while the pump stand is constructed from cast aluminium, providing increased protection during rugged handling. The design includes a rubber pump chamber and a urethane vortex impeller, which enhance wear resistance against sand and silt
• Dual Position Outlet Port: This feature allows the user to position the outlet hose either horizontally or vertically, preventing kinks and ensuring flexible operation
• Backflow Prevention: An integral swing check valve is included to prevent water from flowing back into the pump from the discharge hose
• Cooling System: The pump is designed with a water and air cooling route to the top outlet, enabling it to operate for extended periods even with little or no water present

The Tsurumi - LSC1.4S is widely used in:

• Flood control operations
• Construction sites
• Utilities
• Hire fleets
• Domestic Uses for draining flooded areas such as garages and basements

• Weight: Approximately 12 kg
• Cable Length: Supplied with a 10-metre heavy-duty rubber power cable

This pump combines high dynamic performance with durability, making it a reliable choice for various dewatering tasks.

The Tsurumi - LSC2.75S Puddle Pump - 10-10-1352 (SKU 10-10-1352) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This automatic, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

• Model: LSC2.75S
• Voltage: 230V
• Power: 0.75 kW
• Maximum Flow Rate: 230 litres per minute
• Maximum Head: 15 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 438mm height
• Dry Weight: 15.2 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC2.75S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LSC1.4S H2O Puddle Pump - 10-10-1252 with Automatic H¢ššO Sensor Switch is a versatile and efficient submersible pump designed for low-level water drainage Uses. This 110V model, identified by SKU 10-10-1252, offers exceptional dynamic performance and reliability for various industrial and residential uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

Pumping Capability: The LSC1.4S H2O can pump water down to an impressively low level of just 1mm, making it ideal for removing water from flat surfaces.

Power and dynamic performance:

• Power: 0.48 kW
• Maximum flow rate: 170 litres per minute
• Maximum head: 11 metres

Sizing and Weight Information:

• Size: 221 x 196 x 385 mm (w x l x h)
• Dry weight: 12.05 kg

Outlet Size: 25mm (1 inch)

Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder.

Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring.

Cable: Includes 10 metres of low-voltage, PVC power cable.

Versatility: Suitable for various Uses, including flood control, construction sites, utilities, and fixed installations.

Durability: Features a pressed steel outer casing and cast aluminium pump stand for increased protection and longevity.

• Integral swing check valve to prevent backflow of water
• 403 Stainless Steel shaft with ultra hard-wearing twin mechanical seal
• Patented oil chamber with oil lifter for seal lubrication during operation in any position
• Capable of extended operation with little or no water

The Tsurumi - LSC1.4S H2O Puddle Pump combines advanced technology with robust construction, making it an excellent choice for professionals seeking a reliable and efficient water removal solution.

The Tsurumi - LSC1.4S H2O Puddle Pump - 10-10-1171 with Automatic H¢ššO Sensor Switch is a versatile and efficient submersible pump designed for low-level water drainage Uses. This 110V model, identified by SKU 10-10-1171, offers exceptional dynamic performance and reliability for various industrial and residential uses.

The LSC range are lightweight and robust single-phase contractors' pump used widely by tool rental companies, utilities, construction companies and in flood defence. It is often referred to as a "puddle sucker", as it can pump water levels down to 1mm. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. This discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. An additional feature is an integral check valve which will prevent backflow of water from the discharge hose, retaining priming water for pumping to begin quickly. 

Supplied with 10 metres of heavy-duty rubber power cable.

Pumping Capability: The LSC1.4S H2O can pump water down to an impressively low level of just 1mm, making it ideal for removing water from flat surfaces.

Power and dynamic performance:

• Power: 0.48 kW
• Maximum flow rate: 170 litres per minute
• Maximum head: 11 metres

Sizing and Weight Information:

• Size: 221 x 196 x 385 mm (w x l x h)
• Dry weight: 12.05 kg

Outlet Size: 50mm (2 inch)

Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder.

Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring.

Cable: Includes 10 metres of low-voltage, PVC power cable.

Versatility: Suitable for various Uses, including flood control, construction sites, utilities, and fixed installations.

Durability: Features a pressed steel outer casing and cast aluminium pump stand for increased protection and longevity.

• Integral swing check valve to prevent backflow of water
• 403 Stainless Steel shaft with ultra hard-wearing twin mechanical seal
• Patented oil chamber with oil lifter for seal lubrication during operation in any position
• Capable of extended operation with little or no water

The Tsurumi - LSC1.4S H2O Puddle Pump combines advanced technology with robust construction, making it an excellent choice for professionals seeking a reliable and efficient water removal solution.

The Tsurumi - LSC2.75S H2O Puddle Pump - 10-10-1353 with Automatic H¢ššO Sensor Switch (SKU 10-10-1353) is a high-dynamic performance submersible pump designed for efficient water removal in various Uses. This automatic, 230V single-phase model combines powerful capabilities with versatile features, making it an ideal choice for construction sites, flood control operations, and general dewatering tasks.

• Model: LSC2.75S
• Voltage: 230V
• Power: 0.75 kW
• Maximum Flow Rate: 230 litres per minute
• Maximum Head: 15 metres
• Outlet Diameter: 50mm (2 inch)
• Dimensions: 196mm diameter x 438mm height
• Dry Weight: 15.2 kg

• Exceptional Low-Level Pumping: Capable of pumping water down to just 1mm, making it perfect for removing nuisance water from flat surfaces
• Durable Construction: Features a pressed steel outer casing and a cast aluminium pump stand for increased protection during rugged handling
• Automatic Operation: Equipped with the SwitcH¢ššO system, featuring three 304 Stainless Steel probes (on, off, and common) set in an epoxy-resin filled holder
• Control Panel: Supplied with a Multi 1-P control panel for easy operation and monitoring
• Wear-Resistant Design: Incorporates a rubber pump chamber and a urethane vortex impeller, enhancing resistance against sand and silt
• Dual Position Outlet Port: Allows for flexible hose positioning, either horizontally or vertically, to prevent kinking
• Backflow Prevention: Equipped with an integral swing check valve to prevent water from flowing back into the pump
• Extended Operation: Designed with a water and air cooling route, enabling operation for long periods even with minimal water present

The Tsurumi - LSC2.75S is widely used in:

• Construction sites
• Flood control operations
• Utilities
• Hire fleets
• Domestic settings (e.g., draining flooded basements or garages)

This versatile pump comes with a 10-metre heavy-duty rubber power cable and is backed by a 3-year manufacturer's guarantee, ensuring reliability and peace of mind for users.

The Tsurumi - LB-800 Manual 110V is a compact and powerful submersible drainage Pump - 10-10-1129 designed for efficient water removal.

The LB series is a lightweight and robust range of single-phase contractors' pumps used widely by tool rental companies, utilities and in the construction industry. Considered the "hire industry standard", early models have been used since the 1970's. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. On the LB-480 and LB-800 models, the discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. 

• Motor Output: 0.75 kW
• Voltage: 110V
• Phase: Single-phase
• Discharge Bore: 50mm (2 inches)
• Maximum Flow Rate: 310 litres per minute
• Maximum Head: 15 metres
• Free Passage: 6mm

• Dimensions: 187 x 408mm (diameter x height)
• Dry Weight: 13 kg

• Slimline Design: The pump's compact size allows it to fit into 8-inch pipes, making it versatile for various Uses
• Top Discharge: This feature provides maximum motor cooling efficiency, enabling continuous duty operation at low water levels and extended dry-run capability
• Durable Construction: Built with robust materials for long-lasting dynamic performance in demanding conditions
• Manual Operation: This version is manually operated, without an automatic float switch

The LB-800 is capable of handling dirty water and is suitable for various Uses such as construction site dewatering, flood control, and general water transfer tasks. Its ability to operate at low water levels and withstand dry running makes it particularly useful in challenging environments. This pump combines powerful dynamic performance with easy handling, making it a popular choice for contractors and other professionals who require reliable water removal solutions.

The Tsurumi - LB-800 Manual 230V is a compact and powerful submersible drainage Pump - 10-10-1094 designed for efficient water removal.

The LB series is a lightweight and robust range of single-phase contractors' pumps used widely by tool rental companies, utilities and in the construction industry. Considered the "hire industry standard", early models have been used since the 1970's. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position, with rubber and urethane components that give excellent wear resistance in site water Uses that contain sand and silt in suspension. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. On the LB-480 and LB-800 models, the discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a kinked hose. 

• Motor Output: 0.75 kW
• Voltage: 230V
• Phase: Single-phase
• Discharge Bore: 50mm (2 inches)
• Maximum Flow Rate: 310 litres per minute
• Maximum Head: 15 metres
• Free Passage: 6mm

• Dimensions: 187 x 408mm (diameter x height)
• Dry Weight: 13 kg

• Slimline Design: The pump's compact size allows it to fit into 8-inch pipes, making it versatile for various Uses
• Top Discharge: This feature provides maximum motor cooling efficiency, enabling continuous duty operation at low water levels and extended dry-run capability
• Durable Construction: Built with robust materials for long-lasting dynamic performance in demanding conditions
• Manual Operation: This version is manually operated, without an automatic float switch

The LB-800 is capable of handling dirty water and is suitable for various Uses such as construction site dewatering, flood control, and general water transfer tasks. Its ability to operate at low water levels and withstand dry running makes it particularly useful in challenging environments. This pump combines powerful dynamic performance with easy handling, making it a popular choice for contractors and other professionals who require reliable water removal solutions.

The Tsurumi - HS2.75S Submersible Pump - 10-10-1095 (Manual, 230V) is a robust and versatile water pump designed for various Uses in environments like construction, industrial, and domestic settings. This model, with SKU 10-10-1095, offers reliable dynamic performance for efficiently moving water in challenging environments.

The HS series is a lightweight and robust range of single-phase contractors' pumps used widely by tool rental companies, utilities and in the construction industry. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position; the spiral shape minimizes clogging. These combine with a urethane impeller, stirrer and Cast Iron pump chamber to give excellent wear and blockage resistance in water that contains sand and silt. The high-performance motor enables long periods of operation while partially submerged. 

The puddle pump adaptor kit is an optional extra that will convert the HS2.4S manual to a puddle sucker. It will enable the pumping of water levels down to 10mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, Stainless Steel bolts, nuts and washers. 

Performance

• Maximum Flow Rate: 230 litres per minute
• Maximum Head: 18 metres
• Free Passage: 7 mm

Product Sizing

• Discharge Outlet: 50 mm (2 inches)
• Dimensions (W x L x H): 185 x 290 x 385 mm
• Dry Weight: 16.9 kg

Electrical

• Power: 0.75 kW
• Phase: Single phase

• Pump Type: Semi-vortex impeller
• Shaft Seal: Double mechanical seal in oil bath
• Motor: 2-pole induction motor with IP68 protection
• Built-in Protection: Miniature motor protector
• Insulation: Class E

Materials

• Impeller: Urethane rubber
• Casing: Ductile iron casting (EN-GJS-700-2)
• Shaft: Stainless Steel (EN-X6Cr13)
• Cable: Rubber, H07RN-F

The HS2.75S is suitable for pumping various types of water, including:

• Spring water
• Rainwater
• Groundwater
• Sand-carrying water

This pump is particularly well-suited for construction site dewatering, flood control, and other Uses where reliable water removal is essential.

The Tsurumi - HS3.75SL Submersible Pump - 10-10-1108 is a manual, single-phase industrial pump designed for high-flow Uses.

The HS series is a lightweight and robust range of single-phase contractors' pumps used widely by tool rental companies, utilities and in the construction industry. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position; the spiral shape minimizes clogging. These combine with a urethane impeller, stirrer and Cast Iron pump chamber to give excellent wear and blockage resistance in water that contains sand and silt. The high-performance motor enables long periods of operation while partially submerged. 

The puddle pump adaptor kit is an optional extra that will convert the HS2.4S manual to a puddle sucker. It will enable the pumping of water levels down to 10mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, Stainless Steel bolts, nuts and washers. 

• Model: HS3.75SL
• Voltage: 230V
• Power: 0.75 kW
• Outlet Size: 75 mm (3 inches)
• Flow Rate: 580 litres per minute
• Maximum Head: 10.8 metres
• Free Passage: 7 mm

The HS3.75SL is designed for high-flow Uses, capable of pumping up to 580 litres per minute. This makes it particularly suitable for dirty water drainage and construction site dewatering. The pump features a manual operation mode, providing users with direct control over its function.

As a submersible pump, the HS3.75SL is built to withstand challenging environments. It comes equipped with 10 metres of heavy-duty rubber power cable, enhancing its durability and ease of use in various settings.

This pump is versatile and can be utilised in a wide range of scenarios where water needs to be moved efficiently, particularly in construction and industrial contexts.The Tsurumi - HS3.75SL combines robust construction with high flow capacity, making it a reliable choice for demanding water pumping Uses in industrial and construction settings.

The Tsurumi - HS3.75S Submersible Pump - 10-10-1147 is a manual, single-phase industrial pump designed for high-flow Uses.

The HS series is a lightweight and robust range of single-phase contractors' pumps used widely by tool rental companies, utilities and in the construction industry. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position; the spiral shape minimizes clogging. These combine with a urethane impeller, stirrer and Cast Iron pump chamber to give excellent wear and blockage resistance in water that contains sand and silt. The high-performance motor enables long periods of operation while partially submerged. 

The puddle pump adaptor kit is an optional extra that will convert the HS2.4S manual to a puddle sucker. It will enable the pumping of water levels down to 10mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, Stainless Steel bolts, nuts and washers. 

• Model: HS3.75S
• Voltage: 110V
• Power: 0.75 kW
• Outlet Size: 75 mm (3 inches)
• Flow Rate: 310 litres per minute
• Maximum Head: 18 metres
• Free Passage: 7 mm

The HS3.75S is designed for high-flow Uses, capable of pumping up to 310 litres per minute. This makes it particularly suitable for dirty water drainage and construction site dewatering. The pump features a manual operation mode, providing users with direct control over its function.

As a submersible pump, the HS3.75S is built to withstand challenging environments. It comes equipped with 10 metres of heavy-duty rubber power cable, enhancing its durability and ease of use in various settings.

This pump is versatile and can be utilised in a wide range of scenarios where water needs to be moved efficiently, particularly in construction and industrial contexts.The Tsurumi - HS3.75S combines robust construction with high flow capacity, making it a reliable choice for demanding water pumping Uses in industrial and construction settings.

The Tsurumi - HS3.75S Submersible Pump - 10-10-1159 is a manual, single-phase industrial pump designed for high-flow Uses.

The HS series is a lightweight and robust range of single-phase contractors' pumps used widely by tool rental companies, utilities and in the construction industry. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position; the spiral shape minimizes clogging. These combine with a urethane impeller, stirrer and Cast Iron pump chamber to give excellent wear and blockage resistance in water that contains sand and silt. The high-performance motor enables long periods of operation while partially submerged. 

The puddle pump adaptor kit is an optional extra that will convert the HS2.4S manual to a puddle sucker. It will enable the pumping of water levels down to 10mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, Stainless Steel bolts, nuts and washers. 

• Model: HS3.75S
• Voltage: 230V
• Power: 0.75 kW
• Outlet Size: 75 mm (3 inches)
• Flow Rate: 310 litres per minute
• Maximum Head: 18 metres
• Free Passage: 7 mm

The HS3.75S is designed for high-flow Uses, capable of pumping up to 310 litres per minute. This makes it particularly suitable for dirty water drainage and construction site dewatering. The pump features a manual operation mode, providing users with direct control over its function.

As a submersible pump, the HS3.75S is built to withstand challenging environments. It comes equipped with 10 metres of heavy-duty rubber power cable, enhancing its durability and ease of use in various settings.

This pump is versatile and can be utilised in a wide range of scenarios where water needs to be moved efficiently, particularly in construction and industrial contexts.The Tsurumi - HS3.75S combines robust construction with high flow capacity, making it a reliable choice for demanding water pumping Uses in industrial and construction settings.