-
7230292
Clarke - CPCDP500 Portable Contractor Dewatering Pump - 230V - Single Phase - 240 Ltr/minThe Clarke - CPCDP500 Portable Contractor Dewatering Pump - 230V - Single Phase - 240 Ltr/min.
The Clarke CPCDP500 Contractor Dewatering Pump offers a robust and portable design, suitable for DIY and Trade purposes in pits, trenches, tunnels and liquid tanks with slurry. This pump is fitted with a 500W drive, offering a 240 l/min flow rate, engineered for shifting clean and dirty water including solids up to 7mm. The CPCD500 is manufactured with a Stainless Steel drive shaft, impeller and base plate ensuring a longer life time, plus it is completed with a convenient carry handle for straightforward transport.
£382.80 RRP £294.60 £245.50
In stock
Free Standard Delivery
-
7230291
Clarke - CGP870 Cast Iron Sewage & Dirty Water Grinder Pump - 230V - Single Phase - 140 Ltr/minThe Clarke - CGP870 Cast Iron Sewage & Dirty Water Grinder Pump - 230V - Single Phase - 140 Ltr/min.
With a Cast Iron body and powerful 870W drive, the CGP870 Grinder Pump is the ideal pump for the grinding and disposal sewage and waste water. The pump body is protected by a hard-wearing dual-layer coating to avoid any risk of leaks. Plus, the pump also features thermal cut-out overload protection.
£430.80 RRP £322.80 £269.00
In stock
Free Standard Delivery
-
7230293
Clarke - CSP1530 Cast Iron Sewage & Dirty Water Pump - 230V- Single Phase - 500 Ltr/minThe Clarke - CSP1530 Cast Iron Sewage & Dirty Water Pump - 230V- Single Phase - 500 Ltr/min.
With a Stainless Steel body, Cast Iron foundation and robust 1530W drive offering an impressive 500 l/min flow rate, the CSP1530 Sewage Pump can pump clean and dirty water including solids with a diameter up to 50mm. This sewage pump is ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.
£598.80 RRP £432.00 £360.00
In stock
Free Standard Delivery
-
020-975
06601 - Low Voltage Submersible Bilge Drainage Pump - 12V - For Intermittent Use - ManualThe 06601 Low Voltage Submersible Bilge Drainage Pump - 12v - For Intermittent Use - Manual. Voltage for this item is 12V.
Suitable for clean, dirty, boat bilge water drainage applications.
Can be made top operate automatically by using our low level float switch, see code 020-948 and our panel switch see code 020-980
NOT CONTINUOUSLY RATED.
FOR INTERMTTENT USE ONLY.
All the low bvoltage motors have brushes and a duty cylcle of approx twenty minutes in every hour
This item is NOT continuously rated. Only for intermittent use.
£97.20 RRP £92.34 £76.95
In stock
Free Standard Delivery
-
020-977
06601 - Low Voltage Submersible Bilge Drainage Pump - 24V - For Intermittent Use - ManualThe 06601 Low Voltage Submersible Bilge Drainage Pump - 24v - For Intermittent User - Manual. Voltage for this item is 24V.
Suitable for clean, dirty, boat bilge water drainage applications.
Can be made top operate automatically by using our low level float switch, see code 020-948 and our panel switch see code 020-982
NOT CONTINUOUSLY RATED.
FOR INTERMTTENT USE ONLY.
All the low bvoltage motors have brushes and a duty cylcle of approx twenty minutes in every hour
This item is NOT continuously rated. Only for intermittent use.
£97.20 RRP £92.34 £76.95
In stock
Free Standard Delivery
-
200-0138EX
Dreno - AM80-C.242 EX Single Channel Open Impeller - Submersible Sewage Pump - 230V - Single Phase - Manual - Cast IronThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
All main components are made of grey Cast Iron GG25. This product is manufactured by Dreno. Two individual mechanical seals (motor side in the oil chamber, impeller side in contact with the liquid) and high quality parts, ensure the perfect functioning and reliability of the product. The A 4 poles Series is applied to pump clear liquids and sewage. The wide range and high hydraulic efficiency renders this series particularly suited to water treatment plants, sewers, farming and industrial plants including in airports, underground public transport, hospitals and hotels. The A series is fitted with open single channel and highly efficient impellers. The shredding system ensures a high degree of reliability even in presence of fibrous materials and solids in suspension. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable. The pumps with EX (ATEX) can be utilised in potentially explosive environments.
The Dreno AM80-C.242 EX Single Channel Open Impeller Submersible Sewage Pump - 230v - Single Phase - Manual is a Sewage Pump item. Voltage for this item is 230V.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£4,309.20 RRP £3,447.36 £2,872.80
In stock
Free Standard Delivery
-
200-0138
Dreno - AM80-C.242 Single Channel Open Impeller - Submersible Sewage Pump - 230V - Single Phase - Manual - Cast IronThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
All main components are made of grey Cast Iron GG25. This product is manufactured by Dreno. Two individual mechanical seals (motor side in the oil chamber, impeller side in contact with the liquid) and high quality parts, ensure the perfect functioning and reliability of the product. The A 4 poles Series is applied to pump clear liquids and sewage. The wide range and high hydraulic efficiency renders this series particularly suited to water treatment plants, sewers, farming and industrial plants including in airports, underground public transport, hospitals and hotels. The A series is fitted with open single channel and highly efficient impellers. The shredding system ensures a high degree of reliability even in presence of fibrous materials and solids in suspension. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable. The pumps with EX (ATEX) can be utilised in potentially explosive environments.
The Dreno AM80-C.242 Single Channel Open Impeller Submersible Sewage Pump - 230v - Single Phase - Manual is a Sewage Pump item. Voltage for this item is 230V.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£3,594.00 RRP £2,875.20 £2,396.00
In stock
Free Standard Delivery
-
200-0160EX
Dreno - AT100-C.243 EX Single Channel Open Impeller - Submersible Sewage Pump - 400V - Three Phase - ManualThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
The Dreno AT100-C.243 EX Single Channel Open Impeller Submersible Sewage Pump - 400v - Three Phase - Manual. This product is manufactured by Dreno. Voltage for this item is 400V.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£3,933.60 RRP £3,146.88 £2,622.40
In stock
Free Standard Delivery
-
200-0160
Dreno - AT100-C.243 Single Channel Open Impeller - Submersible Sewage Pump - 400V - Three Phase - ManualThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
The Dreno AT100-C.243 Single Channel Open Impeller Submersible Sewage Pump - 400v - Three Phase - Manual. This product is manufactured by Dreno. Voltage for this item is 400V.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£3,280.80 RRP £2,624.64 £2,187.20
In stock
Free Standard Delivery
-
200-0162EX
Dreno - AT100-C.244 EX Single Channel Open Impeller - Submersible Sewage Pump - 400V - Three Phase - Manual - Cast IronThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
All main components are made of grey Cast Iron GG25. This product is manufactured by Dreno. Two individual mechanical seals (motor side in the oil chamber, impeller side in contact with the liquid) and high quality parts, ensure the perfect functioning and reliability of the product. The A 4 poles Series is applied to pump clear liquids and sewage. The wide range and high hydraulic efficiency renders this series particularly suited to water treatment plants, sewers, farming and industrial plants including in airports, underground public transport, hospitals and hotels. The A series is fitted with open single channel and highly efficient impellers. The shredding system ensures a high degree of reliability even in presence of fibrous materials and solids in suspension. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable. The pumps with EX (ATEX) can be utilised in potentially explosive environments.
Please see the technical data sheet
Accessories - 3" Coupling foot, claw and top bracket - Code 100-11510. 4" Coupling foot, claw and top bracket - Code 100-11511. Free standing bases - P5 100-11626 or P6 100-11627. DN80 3" Flange Code M62222223, DN100 Flange Code M62222224
The Dreno AT100-C.244 EX Single Channel Open Impeller Submersible Sewage Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V. It is supplied with a 10m cable.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£4,458.00 RRP £3,566.40 £2,972.00
In stock
Free Standard Delivery
-
200-0162
Dreno - AT100-C.244 Single Channel Open Impeller - Submersible Sewage Pump - 400V - Three Phase - Manual - Cast IronThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
All main components are made of grey Cast Iron GG25. This product is manufactured by Dreno. Two individual mechanical seals (motor side in the oil chamber, impeller side in contact with the liquid) and high quality parts, ensure the perfect functioning and reliability of the product. The A 4 poles Series is applied to pump clear liquids and sewage. The wide range and high hydraulic efficiency renders this series particularly suited to water treatment plants, sewers, farming and industrial plants including in airports, underground public transport, hospitals and hotels. The A series is fitted with open single channel and highly efficient impellers. The shredding system ensures a high degree of reliability even in presence of fibrous materials and solids in suspension. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable. The pumps with EX (ATEX) can be utilised in potentially explosive environments.
Please see the technical data sheet
Accessories - 3" Coupling foot, claw and top bracket - Code 100-11510. 4" Coupling foot, claw and top bracket - Code 100-11511. Free standing bases - P5 100-11626 or P6 100-11627. DN80 3" Flange Code M62222223, DN100 Flange Code M62222224
The Dreno AT100-C.244 Single Channel Open Impeller Submersible Sewage Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V. It is supplied with a 10m cable.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£3,712.80 RRP £2,970.24 £2,475.20
In stock
Free Standard Delivery
-
200-0164EX
Dreno - AT100-C.245 EX Single Channel Open Impeller - Submersible Sewage Pump - 400V - Three Phase - ManualThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
The Dreno AT100-C.245 EX Single Channel Open Impeller Submersible Sewage Pump - 400v - Three Phase - Manual. This product is manufactured by Dreno. Voltage for this item is 400V.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£4,975.20 RRP £3,980.16 £3,316.80
In stock
Free Standard Delivery
-
200-0164
Dreno - AT100-C.245 Single Channel Open Impeller - Submersible Sewage Pump - 400V - Three Phase - ManualThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
The Dreno AT100-C.245 Single Channel Open Impeller Submersible Sewage Pump - 400v - Three Phase - Manual. This product is manufactured by Dreno. Voltage for this item is 400V.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£4,147.20 RRP £3,317.76 £2,764.80
In stock
Free Standard Delivery
-
200-0170EX
Dreno - AT100-C.255 EX Single Channel Open Impeller - Submersible Sewage Pump - 400V - Three Phase - Manual - Cast IronThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
All main components are made of grey Cast Iron GG25. This product is manufactured by Dreno. Two individual mechanical seals (motor side in the oil chamber, impeller side in contact with the liquid) and high quality parts, ensure the perfect functioning and reliability of the product. The A 4 poles Series is applied to pump clear liquids and sewage. The wide range and high hydraulic efficiency renders this series particularly suited to water treatment plants, sewers, farming and industrial plants including in airports, underground public transport, hospitals and hotels. The A series is fitted with open single channel and highly efficient impellers. The shredding system ensures a high degree of reliability even in presence of fibrous materials and solids in suspension. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable. The pumps with EX (ATEX) can be utilised in potentially explosive environments.
Please see the technical data sheet
Accessories - 3" Coupling foot, claw and top bracket - Code 100-11510. 4" Coupling foot, claw and top bracket - Code 100-11511. Free standing bases - P5 100-11626 or P6 100-11627. DN80 3" Flange Code M62222223, DN100 Flange Code M62222224
The Dreno AT100-C.255 EX Single Channel Open Impeller Submersible Sewage Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£6,867.60 RRP £5,494.08 £4,578.40
In stock
Free Standard Delivery
-
200-0170
Dreno - AT100-C.255 Single Channel Open Impeller - Submersible Sewage Pump - 400V - Three Phase - ManualThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
The Dreno AT100-C.255 Single Channel Open Impeller Submersible Sewage Pump - 400v - Three Phase - Manual. This product is manufactured by Dreno. Voltage for this item is 400V.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£5,721.60 RRP £4,577.28 £3,814.40
In stock
Free Standard Delivery
-
200-0172EX
Dreno - AT100-C.256 EX Single Channel Open Impeller - Submersible Sewage Pump - 400V - Three Phase - Manual - Cast IronThe A4 poles series is designed for pumping clear liquids and sewage. Its wide range and high hydraulic efficiency make it well-suited to water treatment plants, sewers, farming and industrial sites, including demanding settings such as airports, underground transport, hospitals and hotels.
All main components are made of grey Cast Iron GG25. This product is manufactured by Dreno. Two individual mechanical seals (motor side in the oil chamber, impeller side in contact with the liquid) and high quality parts, ensure the perfect functioning and reliability of the product. The A 4 poles Series is applied to pump clear liquids and sewage. The wide range and high hydraulic efficiency renders this series particularly suited to water treatment plants, sewers, farming and industrial plants including in airports, underground public transport, hospitals and hotels. The A series is fitted with open single channel and highly efficient impellers. The shredding system ensures a high degree of reliability even in presence of fibrous materials and solids in suspension. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable. The pumps with EX (ATEX) can be utilised in potentially explosive environments.
Please see the technical data sheet
Accessories - 3" Coupling foot, claw and top bracket - Code 100-11510. 4" Coupling foot, claw and top bracket - Code 100-11511. Free standing bases - P5 100-11626 or P6 100-11627. DN80 3" Flange Code M62222223, DN100 Flange Code M62222224
The Dreno AT100-C.256 EX Single Channel Open Impeller Submersible Sewage Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V. It is supplied with a 10m cable.
Dreno A4 poles submersible pumps are built for pumping clear liquids and sewage, combining strong hydraulic efficiency with reliable solids-handling performance.
- Open single-channel impeller design for wastewater and sewage duties
- Cast Iron construction for robust site and plant-room installations
- Designed for demanding environments such as water treatment, sewers, farming, and industrial sites
Suitable where dependable foul-water transfer is required across municipal, agricultural, and industrial applications.
£8,055.60 RRP £6,444.48 £5,370.40
In stock
Free Standard Delivery
Submersible Pumps
Submersible pumps are designed to work directly underwater, moving liquid where it’s needed (or away from where it's not). By operating below the waterline, they push water upwards with ease, making them useful for everything from draining flooded basements to emptying tanks, irrigation, and even light sewage handling.
Some submersible pumps run manually, while others include automatic operation with built-in level controls or float switches, kicking in when water reaches a certain level and shutting off when it’s cleared. This makes them a practical, low-maintenance solution for both one-off and continuous use.
At Pumpify, we stock submersible pumps from trusted brands like Ebara, Weda, and Clarke, plus many more. Whether you need a compact pump for domestic use or a heavy-duty unit for commercial systems, you’ll find models that combine durability, ease of use, and performance you can consistently rely on.