The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

The Dreno GM 50-C.155 Submersible Sewage Grinder Pump - 230v - Single Phase - Manual is a Sewage Pump item. Voltage for this item is 230V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

The Dreno GT 50-C.155 Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

The Dreno GM 50-C.160 EX Submersible Sewage Grinder Pump - 230v - Single Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The Dreno GM 50-C.160 EX Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

The Dreno GM 50-C.160 Submersible Sewage Grinder Pump - 230v - Single Phase - Manual is a Sewage Pump item. Voltage for this item is 230V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

The Dreno GM 50-C.160 Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

Please see PDF data sheets attached

For coupling foot, claw and top bracket Easy B add code 200-0433. Duty 50 add code 200-0434. Free standing base P1 100-11622. P2 100-11623. P3 100-11624. Threaded flange DN50 2" M62222221.

The Dreno GT 50-C.165 EX Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

Please see PDF data sheets attached

For coupling foot, claw and top bracket Easy B add code 200-0433. Duty 50 add code 200-0434. Free standing base P1 100-11622. P2 100-11623. P3 100-11624. Threaded flange DN50 2" M62222221.

The Dreno GT 50-C.165 Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

Please see PDF data sheets attached

For coupling foot, claw and top bracket Easy B add code 200-0433. Duty 50 add code 200-0434. Free standing base P1 100-11622. P2 100-11623. P3 100-11624. Threaded flange DN50 2" M62222221.

The Dreno GT 50-C.170 EX Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

Please see PDF data sheets attached

For coupling foot, claw and top bracket Easy B add code 200-0433. Duty 50 add code 200-0434. Free standing base P1 100-11622. P2 100-11623. P3 100-11624. Threaded flange DN50 2" M62222221.

The Dreno GT 50-C.170 Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

Please see PDF data sheets attached

For coupling foot, claw and top bracket Easy B add code 200-0433. Duty 50 add code 200-0434. Free standing base P1 100-11622. P2 100-11623. P3 100-11624. Threaded flange DN50 2" M62222221.

The Dreno GT 50-C.175 EX Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

Please see PDF data sheets attached

For coupling foot, claw and top bracket Easy B add code 200-0433. Duty 50 add code 200-0434. Free standing base P1 100-11622. P2 100-11623. P3 100-11624. Threaded flange DN50 2" M62222221.

The Dreno GT 50-C.175 Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

Please see PDF data sheets attached

For coupling foot, claw and top bracket Easy B add code 200-0433. Duty 50 add code 200-0434. Free standing base P1 100-11622. P2 100-11623. P3 100-11624. Threaded flange DN50 2" M62222221.

The Dreno GT 50-C.180 EX Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.

The grinder/macerator pump range is designed for sewage liquids containing solids and fibrous material, reducing blockage risk and supporting pumping through narrower pipework where required.

The main components are fabricated in Cast Iron GG20. This product is manufactured by Dreno. In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side. The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes. Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is needed. The pump has a macerator in the inlet with axial cutting action. The blades are made of hardened steel guaranteeing maximal cutting efficiency. Maximum 40°C liquid temperature. Maximum immersion 20 metres. Complete with 10 metres of power cable.

The pumps with EX (ATEX) can be applied in potentially explosive environments.

Please see PDF data sheets attached

For coupling foot, claw and top bracket Easy B add code 200-0433. Duty 50 add code 200-0434. Free standing base P1 100-11622. P2 100-11623. P3 100-11624. Threaded flange DN50 2" M62222221.

The Dreno GT 50-C.180 Submersible Sewage Grinder Pump - 400v - Three Phase - Manual is a Sewage Pump item. Voltage for this item is 400V.

Dreno GM/GT grinder pumps are submersible macerator units designed to grind soft solids in sewage, supporting pumping through smaller discharge pipework while delivering strong head performance.

• Grinding/maceration action helps reduce blockage risk in difficult sewage duties
• Designed for high-head applications where pressure performance is required
• Ideal for installations needing reliable sewage transfer through narrower lines

A practical choice for domestic and commercial foul drainage where maceration and higher head are needed.