The Jung Pumpen U6K DS Submersible Drainage Pump - 400v is a Submersible product. This product is manufactured by Jung. Voltage for this item is 400V. It is supplied with a 4m cable. It has an actual flow rate of 250 Ltr/min. The maximum head for this pump is 9.5m. It also features a Float Switch.

The Ebara - BEST ONE VOX 10 MT Submersible Sump Pump - Three Phase - 170 Ltr/min - 400 V is a AISI 304 stainless steel submersible pump with mechanical seal in Ceramic/Carbon/NBR and oversized oil chamber that increase the life and reliability.

The Ebara BEST/A 2 is a submersible electric pump completely in AISI 304 Stainless Steel.
The pump body, the impeller, the suction grille, the motor cover, the seal holder disc and the motor
case are in AISI 304.
The shaft is in AISI 303 (part in contact with the liquid). Double mechanical seal with oil chamber: the upper one in Carbon/Ceramic/NBR (motor side), the lower one in SiC/SiC/NBR (pump side).
PUMP TECHNICAL DATA

The Ebara BEST/A 3 is a submersible electric pump completely in AISI 304 Stainless Steel.
The pump body, the impeller, the suction grille, the motor cover, the seal holder disc and the motor
case are in AISI 304.
The shaft is in AISI 303 (part in contact with the liquid). Double mechanical seal with oil chamber: the upper one in Carbon/Ceramic/NBR (motor side), the lower one in SiC/SiC/NBR (pump side).
PUMP TECHNICAL DATA

The Ebara BEST/A 4 is a submersible electric pump completely in AISI 304 Stainless Steel.
The pump body, the impeller, the suction grille, the motor cover, the seal holder disc and the motor
case are in AISI 304.
The shaft is in AISI 303 (part in contact with the liquid). Double mechanical seal with oil chamber: the upper one in Carbon/Ceramic/NBR (motor side), the lower one in SiC/SiC/NBR (pump side).
PUMP TECHNICAL DATA

The Ebara BEST/A 5 submersible electric pump completely in AISI 304 Stainless Steel.
The pump body, the impeller, the suction grille, the motor cover, the seal holder disc and the motor
case are in AISI 304.
The shaft is in AISI 303 (part in contact with the liquid). Double mechanical seal with oil chamber: the upper one in Carbon/Ceramic/NBR (motor side), the lower one in SiC/SiC/NBR (pump side).
PUMP TECHNICAL DATA

The Lowara DOC7T/A without Float Switch is a submersible drainage pump engineered for handling dirty water. This product is manufactured by Lowara. This pump operates on a three-phase 415V, 50Hz power supply. It is a manual model, meaning it does not come with a float switch for automatic operation.

This submersible pump is appropriate for various applications involving drainage and dirty water handling. It is designed to be durable and efficient, making it ideal for use in residential, commercial, and light industrial settings where reliable water removal is required.

The Lowara DOC7T/A without Float Switch is part of the broader DOC 7 range from Lowara, known for its quality and performance in water management applications.

The Lowara DOC7T/A Submersible Drainage Pump - Without Float - 415v. Voltage for this item is 415V. The maximum head for this pump is 11.1m.

The Tsurumi - KTZ411 is a high performing heavy-duty submersible drainage Pump - 10-10-1065 designed for demanding industrial and construction Uses. This robust pump offers exceptional reliability and efficiency in handling challenging dewatering tasks.

The KTZ series is a range of three phase, contractors' pumps which are constructed in superior grade materials throughout to give exceptional performance in harsh operating conditions. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. The discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a twisted hose. Maintenance and altering the performance of a pump is straightforward, with simple replacement, or changing of parts, without the need for special tools and a workshop. High-performance motors feature thermal protection, enabling simple installation and direct connection to the power supply. 

Special use options: IDS (individually screened cable) and sacrificial anodes (Please request a quotation) 

Performance

• Flow rate: 1450 l/min
• Maximum head: 49 metres
• Motor output: 11 KW (15 HP)
• Voltage: 400V, three-phase
• Free passage: 12 mm

Construction

• Cast Iron body with high-chromium Cast Iron impeller for superior wear resistance
• Top discharge design with side flow for efficient motor cooling
• Double mechanical seal (silicon carbide - silicon carbide) in oil chamber with patented oil lifter

Sizing and Weight Information

• Width: 350 mm
• Length: 373 mm
• Height: 740 mm
• Dry weight: 133 kg

Additional Features

• Manual operation
• 4" BSPM discharge outlet
• Suitable for pumping water with solids content up to 10%
• Slim design for use in confined spaces
• Seal pressure relief ports to protect the shaft seal (for models 7.5 KW and above)

The Tsurumi - KTZ411 is engineered to withstand harsh conditions found on construction sites, in mines, and in industrial settings. Its durable construction and advanced features make it an ideal choice for professionals seeking a reliable and powerful drainage solution.

Ebara DWF submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DWF submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DWF submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DWF submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DWF submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DW submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DW submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits

Ebara DW submersible pumps for dirty water and sewage with solids up to 50mm.

This submersible water pump by Ebara is made from corrosion-resistant Stainless Steel with channel impellers.

Channel impellers are more efficient than vortex impellers but are more prone to blockage.

We generally recommend the use of vortex impeller pumps in all sewage applications unless the discharge head is too high or the pipe run is too long.

Ebara DW pumps all have double mechanical seals which ensure long life and reliability.

• Evacuation of civil and industrial wastewater
• Drainage of wells or excavations
• Drainage of underwater areas
• General Handling of liquids, including those with solid and/or filamentary substances in suspension
• Emptying of seepage liquid
• Handling of dirty wastewater (sanitary services)
• Emptying of cesspits