The Ebara - Best One Manual Submersible Pump - No Float Switch - 230 V is a AISI 304 stainless steel submersible pump with mechanical seal in Ceramic/Carbon/NBR and oversized oil chamber that increase the life and reliability. BEST ONE has a semi-open impeller, while BEST ONE VOX is equipped with vortex type impeller, to guarantee a greater free passage and reduce the possibility of clogging.

JS-750 submersible water drainage pump. JS Pump Series are all-around dewatering pumps that offers top performance and long service life. Some models are available in High Head construction to meet required performance. Effluent wastewater, sump

JS-750 submersible water drainage pump. JS Pump Series are all-around dewatering pumps that offers top performance and long service life. Some models are available in High Head construction to meet required performance. Effluent wastewater, sump

The Ebara BEST/A 2 is a submersible electric pump completely in AISI 304 Stainless Steel.
The pump body, the impeller, the suction grille, the motor cover, the seal holder disc and the motor
case are in AISI 304.
The shaft is in AISI 303 (part in contact with the liquid). Double mechanical seal with oil chamber: the upper one in Carbon/Ceramic/NBR (motor side), the lower one in SiC/SiC/NBR (pump side).
PUMP TECHNICAL DATA

The Ebara BEST/A 3 is a submersible electric pump completely in AISI 304 Stainless Steel.
The pump body, the impeller, the suction grille, the motor cover, the seal holder disc and the motor
case are in AISI 304.
The shaft is in AISI 303 (part in contact with the liquid). Double mechanical seal with oil chamber: the upper one in Carbon/Ceramic/NBR (motor side), the lower one in SiC/SiC/NBR (pump side).
PUMP TECHNICAL DATA

The Ebara BEST/A 4 is a submersible electric pump completely in AISI 304 Stainless Steel.
The pump body, the impeller, the suction grille, the motor cover, the seal holder disc and the motor
case are in AISI 304.
The shaft is in AISI 303 (part in contact with the liquid). Double mechanical seal with oil chamber: the upper one in Carbon/Ceramic/NBR (motor side), the lower one in SiC/SiC/NBR (pump side).
PUMP TECHNICAL DATA

The Ebara BEST/A 5 submersible electric pump completely in AISI 304 Stainless Steel.
The pump body, the impeller, the suction grille, the motor cover, the seal holder disc and the motor
case are in AISI 304.
The shaft is in AISI 303 (part in contact with the liquid). Double mechanical seal with oil chamber: the upper one in Carbon/Ceramic/NBR (motor side), the lower one in SiC/SiC/NBR (pump side).
PUMP TECHNICAL DATA

The Ebara - Optima M Submersible Sump Water Pump - Single Phase - Manual - 230 V is a AISI 304 stainless steel submersible pump with mechanical seal in oil bath and oversized oil chamber. These features make the pump dependable, durable and corrosion-resistant.

The Lowara DOC7T/A without Float Switch is a submersible drainage pump engineered for handling dirty water. This product is manufactured by Lowara. This pump operates on a three-phase 415V, 50Hz power supply. It is a manual model, meaning it does not come with a float switch for automatic operation.

This submersible pump is appropriate for various applications involving drainage and dirty water handling. It is designed to be durable and efficient, making it ideal for use in residential, commercial, and light industrial settings where reliable water removal is required.

The Lowara DOC7T/A without Float Switch is part of the broader DOC 7 range from Lowara, known for its quality and performance in water management applications.

The Lowara DOC7T/A Submersible Drainage Pump - Without Float - 415v. Voltage for this item is 415V. The maximum head for this pump is 11.1m.

The Tsurumi - KTZ411 is a high performing heavy-duty submersible drainage Pump - 10-10-1065 designed for demanding industrial and construction Uses. This robust pump offers exceptional reliability and efficiency in handling challenging dewatering tasks.

The KTZ series is a range of three phase, contractors' pumps which are constructed in superior grade materials throughout to give exceptional performance in harsh operating conditions. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. The discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a twisted hose. Maintenance and altering the performance of a pump is straightforward, with simple replacement, or changing of parts, without the need for special tools and a workshop. High-performance motors feature thermal protection, enabling simple installation and direct connection to the power supply. 

Special use options: IDS (individually screened cable) and sacrificial anodes (Please request a quotation) 

Performance

• Flow rate: 1450 l/min
• Maximum head: 49 metres
• Motor output: 11 KW (15 HP)
• Voltage: 400V, three-phase
• Free passage: 12 mm

Construction

• Cast Iron body with high-chromium Cast Iron impeller for superior wear resistance
• Top discharge design with side flow for efficient motor cooling
• Double mechanical seal (silicon carbide - silicon carbide) in oil chamber with patented oil lifter

Sizing and Weight Information

• Width: 350 mm
• Length: 373 mm
• Height: 740 mm
• Dry weight: 133 kg

Additional Features

• Manual operation
• 4" BSPM discharge outlet
• Suitable for pumping water with solids content up to 10%
• Slim design for use in confined spaces
• Seal pressure relief ports to protect the shaft seal (for models 7.5 KW and above)

The Tsurumi - KTZ411 is engineered to withstand harsh conditions found on construction sites, in mines, and in industrial settings. Its durable construction and advanced features make it an ideal choice for professionals seeking a reliable and powerful drainage solution.

The Tsurumi - KTZ32.2 is a robust and versatile heavy-duty drainage sump Pump - 10-10-1192 designed for demanding industrial and construction Uses. This manual, three-phase 400V pump combines durability with high dynamic performance, making it an ideal choice for contractors and site managers dealing with challenging dewatering tasks.

The KTZ series is a range of three phase, contractors' pumps which are constructed in superior grade materials throughout to give exceptional performance in harsh operating conditions. The hydraulic design features a double mechanical seal, with an oil lifter, for positive seal lubrication in any operating position. The top discharge design forms a water and air-cooling channel and this, combined with a high-performance motor, enables long periods of operation in seepage conditions. The discharge can be fixed in horizontal or vertical positions to enable the user to position the outlet in the required direction and prevent obstructions from a twisted hose. Maintenance and altering the performance of a pump is straightforward, with simple replacement, or changing of parts, without the need for special tools and a workshop. High-performance motors feature thermal protection, enabling simple installation and direct connection to the power supply. 

Special use options: IDS (individually screened cable) and sacrificial anodes (Please request a quotation) 

dynamic performance:

• Maximum flow rate: 800 litres per minute
• Maximum head: 20 metres
• Free passage: 8.5 mm

Construction:

• Outlet size: 3" BSPM & 80 mm
• Motor power: 2.2 kW
• Voltage: 400V (three-phase)

Sizing and Weight Information:

• Width: 216 mm
• Length: 235 mm
• Height: 498 mm
• Dry weight: 34 kg

The KTZ32.2 features a Cast Iron pump casing and motor frame, complemented by an open impeller made of chromium iron. This construction ensures exceptional wear resistance, maximising dynamic performance and minimising maintenance even in harsh operating conditions. The pump is equipped with a heavy-duty motor fitted with internal overloads, allowing for simple installation and direct connection to the power supply.

A key feature of the KTZ32.2 is its 420 Stainless Steel shaft fitted with an ultra-hardwearing, silicon carbide, double mechanical seal housed in an oil chamber. The pump also incorporates a patented oil lifter for positive seal lubrication in any position, enhancing its durability and reliability.

The KTZ32.2 is designed for easy maintenance, allowing simple replacement of wearing parts without the need for specialised tools or a workshop. Additionally, users can alter the pump's head and capacity by changing the impeller and suction cover, providing flexibility for various Uses without the need to purchase a new pump.

The APP HD-15 Sump Pump - 15-10-1062 (Manual, 110V, SKU: 15-10-1062) is a powerful and versatile submersible pump designed for efficient water removal in various Uses. This contractor-grade pump offers reliable dynamic performance for construction sites, utilities, and dewatering projects.

The HD-15 is a single phase contractors' pump capable of very large flows from a relatively small, single phase motor. 110 volt models are designed primarily for use in site drainage Uses, where the water contains sand and silt. Motors are continuously rated which enables the 230 volt models to be suitable for constant running Uses in large ponds, water features and flood defence. It has an integral starting capacitor, hard-faced mechanical seals and is available as manual or with a pendant float switch, for automatic operation. 

Robust Design: The APP HD-15 is built with durability in mind, featuring a sturdy construction that can withstand demanding work environments.

High dynamic performance: With a flow rate of 830 litres per minute and a maximum head of 10 metres, this pump efficiently handles large volumes of water.

Versatility: Suitable for site drainage, pond management, and water features, making it an excellent choice for various industries.

Portability: Its compact and lightweight design allows for easy transportation and setup in different locations.

• Motor: Continuously rated for extended operation
• Power: 1.15 kW
• Voltage: 110V
• Outlet Size: 80mm
• Free Passage: 9mm, allowing for the passage of small solids

The APP HD-15 Sump Pump excels in various scenarios, including:

• Construction site dewatering
• Mining and quarry operations
• Utility maintenance
• Flood control and emergency water removal
• Large pond management
• Water feature installations

With its manual operation, the APP HD-15 Sump Pump offers users direct control over the pumping process, making it ideal for situations that require precise water management. Its robust construction and high-dynamic performance capabilities make it a reliable choice for professionals in need of an efficient dewatering solution.

The Grundfos Unilift KP 250-M1 drainage pump is engineered to deliver reliable performance across a wide range of dewatering and water transfer applications. It is well suited to sump and cellar drainage, emptying tanks and swimming pools, and handling general domestic and light commercial duties where dependable operation is essential.

Built to a high specification, the pump incorporates durable Stainless Steel components to support long service life and consistent performance. Single-phase versions are equipped with an integrated automatic thermal overload protection device, safeguarding the motor against overheating in the event of dry running.

The wet rotor configuration allows the unit to tolerate short periods of dry operation without damage. An open impeller design featuring sling and bevelled-edge vanes helps minimise the risk of blockage by fibres and debris, ensuring smooth and efficient pumping in demanding conditions.

Unilift CC5 - M1

Grundfos Unilift CC pumps are single-stage submersible pumps with a low suction ability down to 3 mm water level. The pumps are designed for pumping rainwater and grey wastewater, e.g. from

The pumps are appropriate for both stationary and portable use. They are for manual operation. The pumps allow free passage of particles up to ¸10 mm.

The motor incorporates self-operating overload protection cutting out the motor in case of overload. When cooled to normal temperature, the motor restarts automatically.

Suitable for: Commercial wastewater, Domestic wastewater, Industrial wastewater treatment and reuse

Unilift CC7 - M1

Grundfos Unilift CC pumps are single-stage submersible pumps with a low suction ability down to 3 mm water level. The pumps are designed for pumping rainwater and grey wastewater, e.g. from

The pumps are appropriate for both stationary and portable use. They are for manual operation. The pumps allow free passage of particles up to ¸10 mm.

The motor incorporates self-operating overload protection cutting out the motor in case of overload. When cooled to normal temperature, the motor restarts automatically.

Suitable for: Commercial wastewater, Domestic wastewater, Industrial wastewater treatment and reuse

Unilift CC9 - M1

Grundfos Unilift CC pumps are single-stage submersible pumps with a low suction ability down to 3 mm water level. The pumps are designed for pumping rainwater and grey wastewater, e.g. from

The pumps are appropriate for both stationary and portable use. They are for manual operation. The pumps allow free passage of particles up to ¸10 mm.

The motor incorporates self-operating overload protection cutting out the motor in case of overload. When cooled to normal temperature, the motor restarts automatically.

Suitable for: Commercial wastewater, Domestic wastewater, Industrial wastewater treatment and reuse