Flexofit Super absorbs water hammer in order to minimize noise and damage to the system. A water hammer arrestor absorbs the wave of pressure before it can develop into water hammer. The Flexofit Super does this by having two areas that are separated by a rubber diaphragm. On one side, there is a gas cushion under pressure, while the other side is in connected to the system. The gas cushion compresses and absorbs the wave of pressure.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Flamco - 25 Ltr - Flexconsole Plus Wall Mounting - Up To - 3 Bar

This is a Spares/Kit item, please get in touch for product compatibility.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

For mounting Flexcon expansion vessels (2 - 25 litres) to a wall. With the Flexconsole the Flexcon vessel is set up vertically fitted to the water connection with the water nipple fitted on the ¾" connection of the console and the expansion pipe fitted to the ½" connection.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Built for sealed LPHW/CHW systems, this Flexconsole Wall Mounting For Flexcon Expansion Vessel delivers reliable performance with a tidy, installer'friendly form.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Reliable absorption of system expansion
• Factory pre-charge for quick commissioning
• Durable diaphragm construction

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

A compact filling assembly for domestic sealed heating systems, Prescofiller the filling device combines a safety valve and a 04 Bar pressure gauge to maintain minimum system pressure with confidence.

Supplied with the Prescomano and ball valve separate from the fill/drain tap, it can be installed in any orientation. Connections are Inlet: 1/2" M, Outlet: 1/2" F, with a factory set pressure of 3.0 Bar and a durable brass body for long service life.

• Safety valve + 04 Bar gauge for quick visual checks
• 3.0 Bar set pressure for dependable protection
• 1/2" M inlet and 1/2" F outlet for straightforward hookup
• Brass construction for robustness and corrosion resistance

Rated for systems up to 125 kW, with broad operating limits for demanding plant rooms.

This Flamco Digital Micro Controller is for controlling BMS Systems or as an interlock within a boiler system.

Appropriate for venting of air from heating and chilled systems with additives of glycol (max. This product is manufactured by Flamco. 50%)

Max. system pressure 10 bar. Min. system pressure 0.2 bar. Min. system temperature -10 °C

Max. system supply temperature: peak: +120 °C / continuous: +90 °C

Install in a frost-free location and in a well accessible place for maintenance. Do not insulate

Not appropriate for steam systems and closed drinking water systems

The Flamco Flexvent - 1/2 inch is a Spares item.

• Flexvent 1/2
• Diameter 30mm
• Height 755mm
• Connection bsp- r 1/2" m
• With shut off valve

Purpose-made for Flamcomat vessels, this two-piece connection hose kit links the main or auxiliary vessel to the pump-unit for fast, leak-tight installation.

Each assembly provides a G 1½" female vessel end and G 1½" male pump end over a 500 mm working length, using braided hose with a ball valve and drainage valve for safe isolation and service.

• Set of 2 pre-made flexible connections
• 500 mm length (approx. 0.5 m)
• Face-sealed female vessel side for reliable sealing
• Integrated ball & drain valves for easy maintenance

Rated to 6 Bar and 110 °C, the hoses are suited to demanding sealed system duties in commercial plantrooms.

Purpose-made for Flamcomat vessels, this two-piece connection hose kit links the main or auxiliary vessel to the pump-unit for fast, leak-tight installation.

Each assembly provides a G 1½" female vessel end and G 1½" male pump end over a 750 mm working length, using braided hose with a ball valve and drainage valve for safe isolation and service.

• Set of 2 pre-made flexible connections
• 750 mm length (approx. 0.5 m)
• Face-sealed female vessel side for reliable sealing
• Integrated ball & drain valves for easy maintenance

Rated to 6 Bar and 110 °C, the hoses are suited to demanding sealed system duties in commercial plantrooms.

Purpose-made for Flamcomat vessels, this two-piece connection hose kit links the main or auxiliary vessel to the pump-unit for fast, leak-tight installation.

Each assembly provides a G 1½" female vessel end and G 1½" male pump end over a 1000 mm working length, using braided hose with a ball valve and drainage valve for safe isolation and service.

• Set of 2 pre-made flexible connections
• 1000 mm length (approx. 1 m)
• Face-sealed female vessel side for reliable sealing
• Integrated ball & drain valves for easy maintenance

Rated to 6 Bar and 110 °C, the hoses are suited to demanding sealed system duties in commercial plantrooms.

Flamco - Ball valve DN 32 - with adapter

This is a Spares/Kit item, please get in touch for product compatibility.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Connection module for communication between two controls.

For SPC control.
Makes linked operating options possible (Configuration and Commissioning by Flamco Service Only).

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.